LauraStar S4a User manual

EN
User manual for Laurastar upgraded
equipment.
FOR THE UPGRADED MODELS
LAURASTAR
S4a/S5a/S6a/S7a/X1a
F1a/X2a/F2a/Pulse
SERVICE CODE: LUK_A4 (A0)

Switching on
2a
2b
Be sure to carefully read user manual
of your model of the Laurastar equipment,
main usage features like (filling with water,
installation, cleaning, and safety
precautions etc.) are not reflected in the
current manual.
It is very important to strictly follow all
advices and operate features of the
ironing system according to the
instructions, which could be found in
the user manual provided by
equipment
manufacturer.
Plug the system into an electricity socket.
Turn on the main system switcher.
1 First system usage
2

3a
3b
3c
3d
In order to produce steam while
ironing, use the button “Manual
Steam Delivery”.
Change the fan directions Fan /
Vacuum with the short term, (no more
than 3 sec.), “Fan” button push.
Change the steam delivery mode pulsing /
continuous with the long (more than
3 sec.) pushing and holding of the “Fan”
button, switching between the modes
is accompanied with the short beep
sound.
3
Change the steam pulsing velocity, and fan
off delay, in a programming mode,
by pushing “Fan” + “Manual Steam
Delivery” buttons for more than 3 seconds.
Switching between modes programming and
usage is accompanied by 3 beeps of an
alarm.
Ironing

3e
Change the velocity of steam delivery
by pressing between 1-2-3 portions
of steam per second. Press and hold
“Manual Steam Delivery” button. Switching
between modes is accompanied by short
alarm beeps, consequently to the modes
by one, two or three beeps.
Four short beeps, the appropriate mode
"hybrid steam ".
Выключение
3f
Adjust the fan off delay 0/60 seconds
by short pressing the fan option (no more
than 3 sec.), switching between modes
is accompanied by one or two short
alarms, which correspond to the modes.
4
3g
* Use the sets of contactless card sets -
LUK-Card. Hold the card to the control panel
ironing system. Information on mode of
ironing, is read from the card. Reading
followed by a one beep.
Further changes in the settings of the
ironing system is fully be kept, for this card.
* Note: Only for versions with LUK NFC.
3I
Turning on and off service of Perao LUK.
Press the button "Fan" for a long time (more
than 3 sec.).
On and off, accompanied by a single beep.

Turning off the ironing system
4a
4b
Turn off the main system switcher.
4
Unplug the system from socked.
Rinsing the boiler
5a
5
The red warning lamp may start shine
constantly during ironing. With this signal,
you must wash boiler.
Rinse out the boiler following the
instructions for ironing systems. When it's
convenient for you, but in 2.5 hours after
ironing, or before the next use.
5b

The red light turns off when the boiler is
filled with fresh water. It is a sign of
washed boiler.
5с
Service
Aa
A
Upgrade kit (Perao LUK), works with the
software authorship by Perao.
Update your software to the latest version
for take advantage of new functionality and
fixes various bugs.
The software can be updated Perao or an
authorized sided firm.
Trust the diagnosis and maintenance of the
upgraded equipment Laurastar only Perao-
authorized service centers.
Authorized partners get online:
www.perao.ru/luk/
Ab
Respect copyright authority of the Perao. Do
not sin against the firm Perao please.
Perao and its suppliers reserve the rights to
the software and its components.
Under the strongest ban:
- Reproduction and distribution.
- Release changes and derivative software.
- Decompile, convert, split into pieces, and
other changes in the software content.

Notes
B

Version 1.0.
© 2016 LTD “Perao”
Dobrolubova str, bld. 2, hsg. 5,
Moscow, Russia, 127254
Phone: [phone]
www.perao.ru, [email protected]
Specification
С
Product : Perao LUK-A4.
Power:
- voltage 220-240 V.
- alternating current (AC).
- frequency 50/60 Hz.
- electric capacity (no more than) 2,5 W.
Dimensions:
- W (not more than) 80 mm.
- H (not more than) 180 mm.
- D (not more than) 60 mm.
Mass :
- Net mass (not more than) 160 g.
- Gross mass (not more than) 200 g.
Terms of use :
- air temperature from + 16ºC to +30ºC.
- humidity not greater than 93%, temp 25ºC .
Information about the manufacturer
D
© 2016 LTD “Perao”
Dobrolubova str, bld. 2, hsg. 5,
Moscow, Russia, 127254
Phone: [phone]
www.perao.ru, [email protected]
Mandatory confirmation of compliance and
the provision of a certificate of conformity or
a declaration of conformity is not necessary
for this product.
This manual may be changed
without the consent of
customers.