lavina LA2000-115 User manual

LAVINA®LA2000-115
Air scrubber
User Manual
Tech Support Line: 800-987-8403 | www.superabrasive.com | [e-mail]

Superabrasive Owner’s Manual Original Language –Lavina ®LA2000-115 01/2019
2

Superabrasive Owner’s Manual Original Language –Lavina ®LA2000-115 01/2019
3
1.WARRANTY AND RETURNS
WARRANTY POLICY FOR LAVINA® LA2000-115
If your warranty card is missing, contact your local distributor and request a warranty card, or visit us at
www.superabrasive.com to download one. The customer is responsible for filling out the card and mailing it to the
manufacturer’s address as indicated on the card. To ensure registration and activation of warranty coverage, the
warranty card must be mailed to the manufacturer within 30 days from date of purchase; failure to do so may void the
warranty. Be sure to provide the manufacturer with all of the information requested, and most importantly with the
distributor’s name, machine serial number, and purchase date.
Superabrasive offers a guarantee on LAVINA® air scrubbers, covering manufacturing and material defects, for a period
of 24 months from the date of purchase, as invoiced by Superabrasive. The following conditions pertain to this
warranty:
• Applies only to the original owner and is not transferable.
• Air scrubber must not be dismantled and tampered with in any way.
• This warranty does not cover any failures or defects caused by normal wear and tear, accidental damage, damage
during transport, improper handling, repairs conducted by an unauthorized facility (without prior authorization by
Superabrasive), or operation that is not in compliance with the instructions provided in this manual. Superabrasive
denies all responsibility for damages or injuries, to any persons or objects, caused by improper operation of or with the
fan unit.
• This warranty will become invalid in the event that equipment or accessories used on/with the cleaner unit are not
supplied or approved by Superabrasive.
• Covered components proven defective will be repaired or replaced at no charge.
• This warranty does not apply to any repair of/to of proprietary parts, nor does it cover cleaning or general
maintenance.
• This warranty does not apply to items with aftermarket alterations, changes, or modifications.
• This warranty is limited to repair or replacement of covered components and reasonable labor expenses.
• In the event of a warranty claim, the cleaner unit must be returned to Superabrasive, or an authorized facility, for a
warranty investigation, and subsequent warranty repair or replacement.
• All warranty returns must be shipped freight prepaid.
• This warranty is in lieu of and excludes every condition of warranty not herein expressly set out and all liability for any
form of consequential loss or damage is hereby expressly excluded.
The above warranty conditions may be changed only by Superabrasive. Superabrasive reserves the right to inspect
and make a final decision on any machine returned under this warranty. This warranty applies to new, used, and demo
machines.
Superabrasive agrees to repair or replace, free of charge, any parts which have failed due to manufacturer or material
defects. Repairs must only be performed at authorized service facilities that have been approved by Superabrasive.
Shipping and handling fees associated with warranty claims must be pre-paid by the customer / claimant.
In the event that a warranty investigation determines that the damage or unit failure is not attributed to manufacturer or
material defects, all costs associated with the repair of the air cleaner will become the direct responsibility of the
claimant. If payment is not rendered for such services, Superabrasive will assume ownership of the machine and any
associated parts in possession.
Superabrasive does not authorize any person or representative to make any other warranty, or to assume for us any
liability in connection with the sale and operation of our products.
The manufacturer is also not liable in the event that the customer fails to submit a Warranty Certificate, fails to follow
manual instructions, uses non-original spare parts, or fails to service/clean the air cleaner regularly and properly.
RETURN POLICY FOR LAVINA® LA2000-115
LAVINA® Air cleaner may be returned, subject to the following terms:
• Air cleaners may not be returned to Superabrasive Inc. for credit or repair without prior authorization. Please contact
Superabrasive Inc. or your local distributor for authorization and issuance of a return authorization number. This
number along with the serial number of the air cleaner must be included on all packages and correspondences. Air
cleaners returned without prior authorization will remain property of the sender and Superabrasive Inc. will not be
responsible for these.
• No air cleaners will be credited after 90 days from the date of Superabrasive’s invoice.
• All returns must be shipped freight prepaid. All returns may be exchanged for other equipment or parts of equal dollar
value. If air cleaners are not exchanged, they are subject to a fifteen percent (15%) restocking fee.

Superabrasive Owner’s Manual Original Language –Lavina ®LA2000-115 01/2019
4
2. DISPOSAL
If your machine after time is not usable or needs to be replaced, send the machine back to Superabrasive or a local
distributor, where a professional disposal complying with the environment laws and directives is guaranteed.
3. MANUFACTURER’S CONTACTS
If you need to contact Superabrasive Inc. with technical support questions, below is the contact information.
Address; 9411 Jackson Trail Road, Hoshton GA 30548, USA
Email: [email protected]
Tel.: [phone]
Fax: [phone]
Website: www.superabrasive.com
Table of Contents
1.WARRANTY AND RETURNS ...................................................................3
WARRANTY POLICY FOR LAVINA® LA2000-115 ........................................3
RETURN POLICY FOR LAVINA® LA2000-115..............................................3
2. DISPOSAL..............................................................................................4
3. MANUFACTURER’S CONTACTS.............................................................4
5. GENERAL INFORMATION...................................................................... 5
Manufacturer........................................................................................... 5
General Description .................................................................................5
WARNING! ...............................................................................................5
6. MAIN COMPONENTS AND CONTROLS .................................................5
Label Data ................................................................................................ 5
Customer Service .....................................................................................5
7.TECHNICAL DATA ..................................................................................6
8. SAFETY PRECAUTIONS..........................................................................7
9. OPERATION OF AIR CLEANER............................................................... 9
9.1 LOCKING CASTER WHEELS ................................................................. 9
9.2 Filter indicator ................................................................................... 9
9.3 PRE-FILTER CHANGE ........................................................................ 10
9.4 HEPA FILTER CHANGE ...................................................................... 10
10. MAINTENANCE ................................................................................ 11
11. Electrical wiring diagram ................................................................. 11
12. TROUBLESHOOTING ........................................................................ 12
Index of Problems and Solutions ........................................................... 12
13. LAVINA® LA2000-115 GENERAL PARTS ........................................... 13
.............................................................................................................. 13

Superabrasive Owner’s Manual Original Language –Lavina ®LA2000-115 01/2019
5
5. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina®LA2000-115 machine air scrubber, the servicing
technician as well as for anyone involved with operating or servicing the machine. We recommend that you read the
instructions very carefully and follow them strictly. The manual includes information about assembling, using, handling,
adjusting and maintaining your Lavina®LA2000-115 air scrubber.
Manufacturer
Superabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the stone and concrete
industry. Today, Superabrasive is one of the world’s leading companies in the production of diamond tools and floor
grinding machinery. At Superabrasive, we strive to deliver the very best solutions to our customers, and enable them to
work more efficiently.
General Description
The air cleaner Lavina® LA2000-115 is designed for sucking and separating dry, non-combustible/non-explosive dust.
Air and finer particles then pass through the filter system of the primary filter and the HEPA filter, where the dust is
separated.
WARNING!
The Lavina® LA2000-115 machine is manufactured and fitted for the above-mentioned applications only! Every other
use may possess risks to the persons involved.
6. MAIN COMPONENTS AND CONTROLS
1) Console
2) Handle
3) Contact
4) Plug with cable
5) Outlet
6) Locked wheel with lock
7) Locker
8) Safety shield
9) Pre Filter
10) Input cover
11) Main box
LABEL DATA
The data on the label provides the voltage, wattage; weight (needed for transportation purposes); production year and
serial number (needed for maintenance purposes).
CUSTOMER SERVICE
For customer assistance and technical support call your local distributor or call Superabrasive Inc. at
1-800-987-8403 or visit us at www.superabrasive.com , where you can download a copy of this manual.
Figure 1