Lawnmower HT2201 User manual

22" 4.0A ELECTRIC HEDGE TRIMMER HT2201
TAILLE-HAIES ÉLECTRIQUE HT2201 4,0 A 558,8 mm (22 pouces)
Read all safety rules and instructions carefully before operating this tool.
Distributed By Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432
Lisez attentivement l’ensemble des règles de sécurité et les instructions avant d’utiliser cet appareil.
Distribué par Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432
Lea cuidadosamente todas las normas de seguridad e instrucciones antes de utilizar esta herramienta.
Distribuida por Cleva North America, 601 Regent Park Court, Greenville, SC 29607 (866)-384-8432
558.8 MM 4.0A CORTADORA DE ORILLAS ELÉCTRICA HT2201
MNL_HT2201_V1
EN p. 2
SP p. 42
Operators Manual / Mode D’emploi / Manual Del Operario
3084514
Conforms to UL STD 82
Certified to CAN/CSA STD.
C22.2 No. 147-M90
FR p. 21

2
Contents.......................................................................................................................................2
Specifications..............................................................................................................................2
Important Safety Instructions..........................................................................................3-5
Specific Safety Rules.......................................................................................................5
Symbols.................................................................................................................................6-7
Know Your Hedge Trimmer ..........................................................................................10
Electrical.. .............................................................................................................................8-9
Assembly............................................................................................................................... 11
Operation..................................................................................................................................12-15
Maintenance....................................................................................................................
.....16
Troubleshooting .................................................................................................................... 16
Warranty ....................................................................................................................................17
Exploded View.......................................................................................................................... 18
Parts List....................................................................................................................... 19
Notes..............................................................................................................................20
CONTENTS
SPECIFICATIONS
22" 4.0A ELECTRIC HEDGE TRIMMER
Reciprocating Speed..............................................................................................3,200 SPM
Amp............................................................................................................................
4 A
Voltage
............................................................................................................
120 V~60Hz
Blade Length.......................................................................................................22in. (55.8 cm)
Unit Weight...................................................................................................... 5.91 Ibs (2.68Kg)
Cutting Capacity.................................................................................................3/4in. (19mm)

3
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious personal injury.

liquids, gases, or dust. Power tools create sparks which may ignitr the dust or fumes.

other). This plug will fit into the polarized wall outlet only one way. if the plug does not fit fully
into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to
install the proper wall outlet. Do not change the plug in any way.

There is an increased risk of electric shock if your body is grounded.

risk of electric shock.



Use outdoor extension cords marked W-A, W, SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A,
or SJTOW-A. These cords are rated for outdoor use and reduce the risk of electric shock.

without proper instruction.


lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use
face mask if operation is dusty.





may create a hazard or cause product damage.



caught in moving parts of the machine or its motor.

installing or removing blades.
WARNING
READ THESE INSTRUCTIONS BEFORE USING THE HEDGE TRIMMER

4
IMPORTANT SAFETY INSTRUCTIONS

control and result in serious personal injury.

footwear. Wear protective footwear that will protect your feet and improve your footing on
slippery surfaces.

and safer at the rate for which it is designed.



switch before unplugging.

switch is dangerous and must be repaired.

damaged, left outdoors, or dropped into water, return it to an authorized service center.

medication.



to be cut when blades are moving. Make sure the switch is off when clearing jammed material.

of dust, lint, hair, and anything that may reduce air flow.

wire, or string which can be thrown or become entangled in the machine.

sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.



dropped, damaged, left outdoors, or dropped into water, return it to a service center.

authorized service center to avoid risk.

storing the hedge trimmer always fit the cutting device cover.

maintenance performed by unqualified personnel could result in injury to the user or damage to
the product.

5
IMPORTANT SAFETY INSTRUCTIONS
SPECIFIC SAFETY RULES
WARNING

No grounding means is provided on a double insulated appliance, nor should a means for
grounding be added to the appliance. Servicing a double insulated appliance requires extreme
care and knowledge of the system and should be done only by qualified service personnel.
Replacement parts for a double insulated appliance must be identical to the parts they replace.

SAVE THESE INSTRUCTIONS
Replace any blade that has been damaged. Always make sure blade is installed correctly and
securely fastened before each use. Failure to do so can cause serious injury.
Never cut any material over 3/4 in.
de. Keep the blade away from body.
Know how to stop the unit quickly in an emergency.
Do not use trimmer without front handles in place. Keep both hands on handles when the unit is
in use.
gripping surface. Disconnect the plug from power source before making any adjustments,
changing accessories, or storing the hedge trimmer. Such preventive safety measures reduce
the risk of starting the product accidentally.
Save these instructions. Refer to them frequently and use them to instruct others who may use
this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of
the product and possible injury.
PROPOSITION 65
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement and other masonry products
Arsenic and chromium from chemically-treated lumber Your risk from these exposures varies,
depending on how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as those dust

6
SYMBOLS
NOITANALPXE/NOITANGISEDEMANLOBMYS
egatloVstloVV
tnerruCserepmAA
)dnocesrepselcyc(ycneuqerFz
treHzH
rewoPttaWW
emiTsetuniMnim
Alternating Current Type of current
Class II Construction Double-insulated construction
Wet Conditions Alert Do not expose to rain or use in damp locations
Read The Operator’s Manual To reduce the risk of injury user must read and
sihtgnisuerofeblaunams’rotarepodnatsrednu
.tcudorp
Safety Alert Precautions that involve your safety.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Eye Protection Always wear safety goggles or safety glasses
ecafllufa,yrassecensa,dnasdleihsedishtiw
.tcudorpsihtgnitareponehwdleihs
ni
tluserdnatehcocirnacstcejbonworhTtehcociR
.egamadytreporpro
yrujnilanosrep
Sharp Blade Do not install or use any type of blade on a
.lobmyssi
htgniyalpsidtcudorp
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper inter-pretation of these symbols will allow you to operate the product better and safer.

7
WARNING
WARNING
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated
with this product.
SERVICE
service technician. For service we suggest you return the product to your nearest AUTHORIZED
SERVICE CENTER for repair. When servicing, use only identical replacement parts.
To avoid serious personal injury, do not attempt to use this product until you read thoroughly
and understand completely the operator’s manual. If you do not understand the warnings and
instructions in the operator’s manual, do not use this product. Call YARDWORKS customer service
for assistance.
The operation of any power tool can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields and, when needed, a
full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields. Always use eye protection which is marked to
comply with ANSI 87.1.
SYMBOL SIGNAL MEANING
DANGER Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION (Without Safety Alert Symbol) Indicates a situation that may
result in property damage.

ELECTRICAL
8
WARNING
WARNING
WARNING
WARNING
1) 2-prong plug
2) Properly grounded
extension cord
USE ONLY IDENTICAL REPLACEMENT PARTS WHEN SERVICING THE HEDGE TRIMMER,
TO AVOID INJURY.
DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL SAFETY PRECAUTIONS
WHEN OPERATING THIS TOOL.
TO AVOID ELECTRIC SHOCK:
Use only identical replacement parts when servicing a tool with double insulation.
TO AVOID ELECTRICAL  FIRE  OR DAMAGE TO THE TOOL, USE
PROPER CIRCUIT PROTECTION. YOUR HEDGE TRIMMER IS WIRED AT THE FACTORY
FOR 120V OPERATION. CONNECT TO A 120V, 15A CIRCUIT AND USE A 15A TIME-
DELAYED FUSE OR CIRCUIT BREAKER. TO AVOID SHOCK OR FIRE IF THE POWER CORD
IS WORN, CUT OR DAMAGED IN ANY WAY, REPLACE IT IMMEDIATELY.
DOUBLE INSULATED (See Figure 1.)
This hedge trimmer has a plug that looks like the one shown in Fig. 1. The hedge trimmer is
double insulated to provide a double thickness of insulation between you and the tool’s electrical
system. All exposed metal parts are isolated from the internal metal motor components with
protective insulation.
1) 2-prong plug
2) Properly grounded extension cord
Fig. 1

9
ELECTRICAL
WARNING
WARNING
WARNING
ALWAYS MAKE SURE THAT YOUR OUTLET IS PROPERLY GROUNDED. IF UNCERTAIN,
HAVE IT CHECKED BY A CERTIFIED ELECTRICIAN.
THIS HEDGE TRIMMER IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN OR USE
IN DAMP LOCATIONS.
GUIDELINES FOR USING EXTENSION CORDS
USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one of heavy enough gauge to carry the current
your product will draw. An undersized cord will cause overheating. The table below shows the
correct size to use depending on cord length and nameplate ampere rating. If in doubt, use
the next heavier gauge.The smaller the gauge number, the heavier the cord. Make sure your
extension cord is properly wired and in good electrical condition. Always replace a damaged
cords away from sharp objects, excessive heat and damp or wet areas.
Use a separate electrical circuit for your tools. This circuit should not be less than #12 wire and
should be protected with a 15A time delayed fuse. Before connecting the motor to the power
line, make sure the switch is in the OFF position and the electric current is rated the same as the
current stamped on the motor nameplate. Running at a lower voltage will damage the motor.
ALTHOUGH THIS TOOL IS DOUBLE INSULATED, THE EXTENSION CORD AND RECEPTACLE
MUST STILL BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM
ELECTRICAL SHOCK.
MINIMUM GAUGE FOR EXTENSION CORDS (AWG)
(WHEN USING 120 V ONLY)
)sretem(teeFnidroCfohtgneLlatoTgnitaRpmA
More Than Not More Than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m)
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for electric current and reduces the risk of electric shock. This tool is equipped with
T be plugged into a matching
outlet that is properly installed and grounded in accordance with ALL local codes and ordinances.

10
KNOW YOUR HEDGE TRIMMER
The safe use of this product requires an understanding of the information on the product and in
this operator’s manual as well as a knowledge of the project you are attempting. Before use of
this product, familiarize yourself with all operating features and safety rules. (See Figure 2.)
CORD RETAINER
A convenient cord retainer helps keep the extension cord connection secure during trimmer
operation.
GUARD
TRIGGER SWITCH
The trigger switch, located beneath the rear handle must be depressed simultaneously with the
auxiliary D-handle safety switch to allow blades to begin cutting. Releasing either will stop blades
from cutting.
AUXILIARY D-HANDLE
The squeezable safety switch found on the auxiliary D-Handle must be depressed first, then the
trigger switch must be squeezed in order to engage blades. Releasing either of the safety switches
will stop the blades.
Blade
Blade support rod
Guard
Auxiliary D-Handle
Trigger switch
Cord retainer
Fig. 2
Tip Protector W/ Hang Hole Blade Scabbard

ASSEMBLY
11
WARNING
WARNING
WARNING
UNPACKING
listed in the packing list are included.
u have carefully inspected and satisfactorily
operated the product.
1-866-384-8432 for assistance.
PACKING LIST
Electric hedge trimmer
Blade Scabbard
Operator’s manual
If any parts are damaged or missing, do not operate this product until the parts are replaced.
Failure to heed this warning could result in serious personal injury.
Do not attempt to modify this product or create accessories not recommended for use with this
leading to possible serious personal injury.
Do not connect to power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.

OPERATION
12
WARNING
WARNING
WARNING
Do not allow familiarity with this product to make you careless. Remember that a careless
Always wear safety goggles or safety glasses with side shields when operating power tools.
Failure to do so could result in objects being thrown into your eyes, resulting in possible serious
injury.
Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious personal
injury.
CONNECTING TO POWER SUPPLY
This product is designed with a cord retainer that prevents the extension cord from being pulled
loose while using.
Form a loop with the end of the extension cord.
Insert loop portion of extension cord through opening in the bottom of the rear handle and place
over cord retainer.
Slowly pull loop against cord retainer until the slack is removed. (Fig.3)
Plug product into extension cord.
NOTE: Failure to remove all excess cord slack from extension cord retainer could result in plug loosening from
receptacle.
Fig.3 1
2
3
Cord retainer
Extension cord

13
OPERATION
WARNING
WARNING
STARTING THE HEDGE TRIMMER (See Figure 3.)
1. Attach an extension cord to your hedger. Plug extension cord into power outlet.
2. Place one hand on the trigger handle (1) and the other hand on the auxiliary D-handle (2).
3. Squeeze/depress the auxiliary D-handle switch, then squeeze the trigger switch (3) to turn ON
the hedge trimmer. The trimmer will stay on as long as either switches are squeezed. Release of
one will stop unit from working.
STOPPING THE HEDGE TRIMMER
1. Release either auxiliary D-Handle Switch (2) or the trigger switch (3).
2. Allow at least 5 seconds for the cutting blade to stop moving.
CUTTING TIPS
Always keep both hands on the hedge trimmer handles. Never hold shrubs with one hand and
operate hedge trimmer with the other. Failure to heed this warning can result in serious injury.
Clear the area to be cut before each use. Remove all objects such as cords, lights, wire, or loose
string which can become entangled in the cutting blade and create a risk of serious personal
injury.
When operating the hedge trimmer, keep the extension cord behind the trimmer. Never drape it
over the hedge being trimmed.
Do not force the hedge trimmer through heavy shrubbery. This can cause the blades to bind
and slow down. If the blades slow down, reduce the pace.
Do not attempt to cut stems or twigs that are larger than 3/4 in., or those obviously too large to
feed into the cutting blade. Use a non-powered hand saw or pruning saw to trim large stems.
If blades do become jammed, stop the motor, allow the blades to stop, and disconnect the plug
from the power source before attempting to remove the obstruction.
If desired, you can use a string to help cut your hedge level. Decide how high you want the
hedge. Stretch a piece of string along the hedge at the desired height. Trim the hedge just
above the guide line of string. Trim the side of a hedge so that it will be slightly narrower at the
top. More of the hedge will be exposed when shaped this way, and it will be more uniform.
Wear gloves when trimming thorny or prickly growth. When trimming new growth, use a wide
sweeping action, so that the stems are fed directly into the cutting blade. Older growth will have
thicker stems and will be trimmed easiest by using a sawing movement.

14
OPERATION
WARNING
OPERATING THE HEDGE TRIMMER
Read the safety information for safe operation using the blade. Extreme care must be taken
Safety Rules (See pages 3 - 5)
The unit is used for cutting in either direction in a slow, sweeping action from side to side.
Stand so that you are stable and balanced on both feet. Do not overreach.
Inspect and clear the area of any hidden objects.
Never use the hedge trimmer near power lines, fencing, posts, buildings, or other immovable
objects.
any damage is detected.
Never touch blades or service unit with the power supply connected.

15
OPERATION
WARNING
WARNING
WARNING
WARNING
WARNING
WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS. USE OF ANY OTHER
PARTS MAY CREATE AT DAMAGE.
ALWAYS WEAR SAFETY GOGGLES OR SAFETY GLASSES WITH SIDE SHIELDS DURING
PRODUCT OPERATION. IF OPERATION IS DUSTY, ALSO WEAR A DUST MASK.
BEFORE INSPECTING, CLEANING, OR SERVICING THE MACHINE, DISCONNECT THE
PLUG FROM POWER SOURCE AND WAIT FOR ALL MOVING PARTS TO STOP. FAILURE
TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY OR
PROPERTY DAMAGE.
DO NOT AT ANY TIME LET BRAKE FLUIDS, GASOLINE, PETROLEUM-BASED PRODUCTS,
PENETRATING OILS, ETC., COME IN CONTACT WITH PLASTIC PARTS. CHEMICALS CAN
DAMAGE, WEAKEN, OR DESTROY PLASTIC WHICH MAY RESULT IN SERIOUS PERSONAL
INJURY. ONLY THE PARTS SHOWN ON THE PARTS LIST ARE INTENDED TO BE REPAIRED
OR REPLACED BY THE CUSTOMER. ALL OTHER PARTS SHOULD BE REPLACED AT AN
RVICE CENTER.
BLADES ARE SHARP. WHEN HANDLING THE BLADE ASSEMBLY, WEAR NON-SLIP, HEAVY-
DUTY PROTECTIVE GLOVES. DO NOT PLACE YOUR HAND OR FINGERS BETWEEN
BLADES OR IN ANY POSITION WHERE THEY COULD GET PINCHED OR CUT. NEVER
TOUCH BLADES OR SERVICE UNIT WITH THE POWER SUPPLY CONNECTED.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.

16
MAINTENANCE
TROUBLESHOOTING
CLEANING THE HEDGE TRIMMER
Stop the motor and disconnect from power supply.
Clean dirt and debris from the body of the hedge trimmer, using a damp cloth with a mild
detergent.
NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by
certain aromatic oils such as pine and lemon, and by solvents such as kerosene.
STORING THE TRIMMER
Clean all foreign material from the product.
Store it in a well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden chemicals and de-icing salts.
Your hedge trimmer comes equipped with a convenient blade safety tip and hang hole. The hang
hole can be used to easily store the trimmer from a simple nail, securely nailed into an interior wall.
Unit will not start.
Motor runs, but cutting
blades do not move.
Hedge trimmer smokes
during operation.
1. Cord not plugged in.
2. Cord or switch is dam-
aged.
Hedge trimmer damaged.
Do not use hedge trimmer.
Hedge trimmer damaged.
Do not use hedge trimmer.
1. Plug in cord.
2. Have cord or switch
replaced.
Call for technical service.
Call for technical service.
PROBLEM POSSIBLE CAUSE SOLUTION

17
WARRANTY
We take pride in producing a high quality, durable product. This Lawnmaster® product carries a
limited two (2) year warranty against defects in workmanship and materials from date of purchase
under normal household use. If product is to be used for commercial, industrial or rental use, a 30
day limited warranty will apply. Batteries carry a one-year warranty against defects in workmanship
and materials. Batteries must be charged in accordance with the operator's manual directions and
regulations in order to be valid. Warranty does not apply to defects due to direct or indirect abuse,
negligence, misuse, accidents, repairs or alterations and lack of maintenance. Please keep your
receipt/packing list as proof of purchase. This warranty gives you specific legal rights, and you
may have other rights, which vary from state to state. For product service call Customer Service at
[phone].
Items not covered by warranty :
1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident,


or


5. Normal deterioration of the exterior finish due to use or exposure.
Transportation Charges : Transportation charges for the movement of any power equipment unit or
attachment are the responsibility of the purchaser. It is the purchaser’s responsibility to pay
transportation charges for any part submitted for replacement under this warranty unless such
return is requested in writing by LawnMaster.
SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.

18
EXPLODED VIEW

19
PARTS LIST
YTQNOITPIRCSED.ONTRAP.ONMETI
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
GH20UL.00.09

GH01EP.10.13
GH20UL.30.15
BOB1WL.05.BO
GH04EP.10.06
BOA2SP.29.12

BOA2SD.48.16
GH20UL.20.00
BOA2SP.39.16
TODXD1.28.UL
GH20UL.00.06
TOQTGX.01.YX
TOTHYY.06.07
GH20UL.00.03
TODXL1.86.UL
WODQ10.04.16
GH01EP.00.07
GH01EP.00.04
GH20UL.10.00
GH01EP.20.00
BOB2FQ.05.1X
GH20UL.00.05
TM5853.00.00
GH20UL.30.10
BLADE SCABBARD
BOLT
REDUCING GRINDING
ROLL SLEEVE
NUT
REDUCING GRINDING
SCREW
REDUCING GRINDING
SCREW
RH HOUSING
SCREW
CORD CABLE
CABLE CLAMP
CABLE CLAMP
SPRING
SWITCH LEVER
INNER CABLE
SWITCH
SWITCH BOARD
SWITCH PLATE
LH HOUSING
ASSISTANT HANDLE
NUT
PROTECT BOARD
MOTOR ASSY.
BLADES ASSY.
1
2
2
2
1
1
2
1
2
1
11
1
2
1
1
1
1
1
2
1
1
1
4
1
1
1

20
NOTES