Leaglee GT01 User manual

1
Leaglee GT01 Bluetooth Speaker Instruction Manual
Important safety tips
Please read this tip and the instruction manual carefully before using it.
Please bring this product and instruction manual when submitting the product to a third
party.
●Protect your health and safety
Please do not let children or pets play the product or its packaging and accessories, so as not
to eat;
Please do not close to the pacemaker and other items susceptible to magnetic field, especially
medical supplies.
●Protect the product
Store the product at room temperature, keep it dry, avoid prolonged exposure to high or low
temperatures or wet rings in the territory;
Please use the supplied accessories or accessories;
Please pay attention to control the input power supply voltage, so as to avoid damage to
equipment overload;
Use the product please gently, to avoid unnecessary collision;
When cleaning the appearance, use a dry soft cloth.
●Battery warning!
This product uses lithium polymer batteries, such as improper use may lead to fire or burns;
Please use the charger provided by the regular manufacturer (voltage 5V, current 0.5~1.0A) or
computer USB port to charge the product;
Prohibit serious collision with this product, serious impact may damage the electronic board
and battery.
●Specification and Disclaimer
This product is designed for portable equipment and high-fidelity systems;
Any use that is not specified in the instruction manual is considered to be an improper use of
the product;
And shall not be liable for any loss resulting from non-standard or misuse or other artificial
causes.

2
Machine diagram
Parts List :
●USB charging cable X1
●User manual X1
●Portable lanyard X1
●Audio input line X1
Basic parameters
●bare metal weight: 93g

3
●Size: 80X51.5X33mm
●Audio type: BP machine Bluetooth sports small sound
●Bluetooth version: BT4.2
●Transmission distance: more than 10 meters
●Frequency response range: 20Hz ~ 20KHz
●Play time: more than 6 hours
●Standby time: more than 7 days
●Radio frequency range: 87.5-108MHz
●Speaker: ¢40/4 ohm/5W
●Microphone: -38±3dB
●Flashlight: F5/150maH
●Waterproof rating: IPX6
●Charging time: 2 hours (maximum charging is more than 3 hours)
●Storage temperature: -30 °C to 80 °C
●Working temperature: -20 °C to 70 °C
Instructions:
●First boot pairing:
In the off state, press and hold the power button “ ” for 3 seconds, the blue light flashes,
and the audio enters the automatic Bluetooth pairing mode. Open a smart device such as a
mobile phone, find “GT01”from the Bluetooth list, and click Connect; confirm that the audio
voice prompts “Connected”or “已连接” after the connection is completed.
●Chinese and English language switching:
In the power-on state, double-click the mode button “ ”, the voice prompts “Chinese
mode”or “English Language”, indicating that the switch is completed.
●Mode switching:
In the power on state, long press the mode button “ ”, the four modes cycle. The audio
supports Bluetooth mode, FM mode, music mode (you need to insert TF card to open), audio
input mode (you need to insert audio adapter cable to open).
●Turn the flashlight on or off:
Click the flashlight button "LIGHT" to turn on the flashlight, then click the flashlight button to turn

4
off the flashlight.
●Boot sound:
In the off state, long press the power button “ ” for 3 seconds, the sound will
automatically turn on, if it has been connected, it will automatically connect with the smart
device.
●Turn off the sound:
In the power on state, press and hold the power button “ ” for 3 seconds until you see the
red light is on, accompanied by the “powering off”or “关机” sound.
●Disconnect and reconnect:
The audio is disconnected from the mobile phone, and a “disconnect”or “已断开” tone
is emitted. At this time, press the power button “ ” to reconnect the mobile phone with
“connect”or “已连接” tone. .
●Answer the call:
When the call comes in, the sound will vibrate and accompany the prompt music; click the
power button “ ” to complete the answer.
●Hang up the phone:
During the call, click the power button " " to complete the hang up;
During the call, double-press the power button “ ” to cut into the call state;
●Refuse to answer the phone:
When the call comes in, the sound will vibrate and accompany the prompt music; long press the
power button " " to complete the hang up.
●Play music:
In the connected state, click the power button " " or operate the player on the phone;
●Music pause:
When playing music, click the power button “ ” to pause the music;
●Volume plus or next:
Volume plus " ", short press, volume up, long press, switch the next song; maximum
volume accompanied by "di di di" prompt
●Volume down or previous one:
Volume minus " ", short press, volume down, long press, switch to the previous song
●The last code is redrawn:

5
When you are in the standby or playing music state, double-click the power button “ ”,
the phone that was last pulled out will be automatically pulled out.
●FM mode:
When the power is on, press the mode button “ ” to enter the FM mode.
●FM mode automatically search or stop searching:
In the FM mode, click the power button “ ” to automatically search the station; then click
the power button “ ” to stop searching.
●FM mode manual search or adjust the volume:
In the FM mode state, the volume is increased by “ ”, long press to switch to the next
channel, short press the volume to increase;
In the FM mode, the volume is reduced by “ ”, long press to switch to the previous
channel, short press to decrease the volume;
Note: In FM mode, the station is automatically searched, and then the station has been searched
by long press the volume plus or Volume minus.
●Music mode:
When the power is on, insert the TF card, the audio automatically enters the music mode or
press and hold the mode button “ ” to enter the music mode.
●Audio input mode:
In the power-on state, insert the 3.5 audio cable, the audio automatically enters the audio input
mode or press and hold the mode button “ ” to enter the audio input mode.
●Audio charging:
The audio is charged via the USB charging cable. When charging is complete, the LED indicator
changes from red (always on) to blue (always on).
Precautions:
●Low battery voltage: The red light is always on, accompanied by a “电池电量低” or
“BATTERY LOW”tone.
LED status
●Power on: the blue light is on;

6
●Shutdown: the red light is on;
●Pairing: blue light flashes;
●When the camera is in standby (the phone is not connected), the blue light flashes;
●During charging: the red light is always on;
●Charging completed: the blue light is always on;
●Low battery voltage: When the battery capacity is lower than 15%, the red light is always on,
accompanied by “电池电量低” or “BATTERY LOW”sound; when the battery capacity is less
than 5%, the sound will automatically shut down.
Remarks:
●Pairing time: 3 minutes, automatically exit the code status after 3 minutes without connecting
to the phone.
●No phone is connected at boot, and it will automatically shut down after 5 minutes.