Lean Cars B012 Owner's manual

Age: 6 Years +
Maximum user
weight: 100kg
1. For family and domestic use only
2. ot to be used in traffic
3. Adult assembly required
CHILDREN'S
G0 KART
Assembly
& User Instructions - Please
keep
for future reference
Important Warning!
Important - Please read these instructions fully before assembly or use
These instructions contain important information which will help you get the
best from your product and ensure safe and correct assembly, use and
maintenance.
Picture for reference
only.
Please
refer
to real
object.
B012

Table of Contents
1. About Your New Vehicle
2. Safety Information
3. Parts List
4. Parts Dia ram
5. Assembly Steps
6. How To Operation Your Vehicle
7. Maintainin Your Vehicle
About Your New Vehicle
Thank you for purchasing our products, we wants your child to enjoy this product for years to come.
Keep these points in mind as you read this guide:
Suitable age: 6
+
years
Load Capacity: Under 100Kg
Material: PP, Metal, EVA/Rubber Optimum
Temperature:
Below 40°C
void to use under burning sun

Safety Information
WARNING!
•General safety:
• Where products need assembly they must always be assembled by an adult. s a parent/carer, it is also your
responsibility to check the tightness of screws, nuts and bolts before each use and if necessary, adjust and
re-tighten.
• This product may contain small parts and it is your responsibility as a parent/carer to exclude children from
the area during assembly due to small parts.
• Remove protective material and poly bags and dispose of them responsibly before giving the assembled
product to your child.
• Remember to retain these instructions for future reference.
• We have tried to make our toys as simple as possible to assemble but inevitably there will be one or two
slightly more complex tasks.
Positioning :
•Do not allow your child to ride at night or in poor light conditions.
•Do not let your child play near steps, swimming pools / spas or other sources of water, on slopes,on streets
or around cars, even if parked on your own property.
•It is prohibited to drive/use this product on the public highway.
•This product is designed to be used on smooth surfaces and should not be used on soft ground or in the
rain or snow.
Before use:
• Dispose of all packaging material responsibly before giving this product to your child.
• Check tightness of all components before giving this product to your child.
During use:
•This product is only suitable for children 6 years and older.
•The toy should be used with caution since skill is required to avoid falls or collisions causing
injury to the user or third parties.
•The maximum rider weight capacity for this product is 100Kg do not overload.
•dult supervision is highly recommended when children play with wheeled toys. Your child’s
safety is your concern.
•Do not allow the child to ride with bare feet or without suitable footwear.
•Ensure the child keeps clothing, hands, hair,fingers and feet away from moving parts.
•The use of protective gear including approved helmets, gloves and pad is recommended.
•Store this product at room temperature; do not leave it outside or uncared for.

Parts List
PART
NO
PART
NAME PICTURE Q,ty (pcs)
REMARKS
PART
NO
PART
NAME PICTURE Q,ty (pcs)
REMARKS
1Vehicle
body 12Seat 1
3Baffle 14Front
wheel 2
5Rear
wheel 26Steering whee 1
7Cover 18Fixing
part 3
9M16
washer 2
Placed
in the
front
axle
10 M12
washer 4
Placed
in the
rear and
front axle
11 M12 Nut 4
Placed
in the
rear and
front axle
12 Bolt 4
13 M5
Nut 414 Screw 12

Parts List
PART
NO
PART
NAME PICTURE Q,ty
(pcs)
REMARKS
PART
NO
PART
NAME PICTURE Q,ty
(pcs)
REMARKS
15 Instruction
manual 116 Spanner 1

Parts Diagram
OTE: Some Parts Shown are assembled
on both sides of vehicle
1Vehicle body *12Seat*13Baffle*1 4Front wheel*25Rear wheel*26Steering wheel*1 7Cover*18Fixing part*39M16Washer*2
10 M12 Washer*411 M12 Nut*412 Bolt*4 13 M5Nut*414
S
crew
*
12

Assembly Steps
Your new vehicle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
1. Install the back wheel.
Remove the nut and washer on the rear axle.
s showed in the picture, Put the rear wheel,washer through the rear axle in turn,then fix them
with nut.
The other side is same as above.

Assembly Steps
2. Install the front wheels .
Remove the nut and washer on the
front axle;
s showed in the picture, fix the
washer, front wheel ,washer onto the
axle in proper order.,then fix them
with nut.
Fix another front wheel on the other
side.
3. Install the steering wheel .
s showed in the picture, press the steering wheel, djust the height well and fasten with the
nut.
Fasten the nut with spanner.
s showed in the picture,install the cove.

Assembly Steps
4. Install the baffle .
s showed in the picture,install the baffle to the corresponding place, and fasten with the fixing
part and screws.
5. Install the seat.
s showed in the picture,install the
seat to the corresponding place, and
fasten with the bolt and nuts.

Assembly Steps
IMPORTANT SUPPLEMENT TO INSTRUCTION MANUAL
fter assembling any wheel to the axles, please check the gap
between the screw thread and the collapsible (refer to below
picture), if the gap is too big, please add two or three washers inside
the wheel, But after tightening the nut outside the wheel, please turn
the wheel by your finger to check if the wheel can run smoothly, this
is very important, because if the wheel can run smoothly, it is ok, but
if the nut press the wheel and the wheel can’t run smoothly, the
motor will be broken easily! Then you need to decrease one or two
washers to make sure the wheel can run smoothly!

How To perate Your Vehicle
Use Operation(Ensure the power switch has been turned on)
(1) Sit on the seat, foot on the pedal, then the vehicle move forward.
Using the steering wheel to control direction.

Maintaining Your Vehicle
• It is parents' responsibility to check main parts of the toy before using, Must regularly examine for potential
hazard, such as screws are fastening enclosure of other parts and that in the event of such damage, the
toy must not be until that damage had been properly removed.
• Make sure the plastic parts of the vehicle are not cracked or broken.
• Occasionally use a lightweight oil to lubricate moving parts such as wheels.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture polish. Do
not use car wax. Do not use abrasive cleaners.
• Do not drive the vehicle in loose dirt, sand or fine gravel which could damage moving parts。