Lectron 32A Level 2 EV Charger User manual

Lectron 32A Level 2
EV Charger
USER MANUAL

In the Box
Safety Information
Page 1
1 x portable electric vehicle charger
1. It is recommended that electrical outlets for your charger should be
installed by a licensed and qualified electrician. To avoid serious injury
or death, the installation must comply with the provisions of the National
Electric Code (NEC) and all local codes. In cases of any conflict between
the local codes and the NEC, local codes shall take precedence.
2. This product must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to help
reduce the risk of electric shock. This product includes a cord equipped
with a grounding conductor and a grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
3. Do NOT DROP the charger or handle.
4. If the output plug separates from the charger module or the handle.
Do not attempt to repair the cable on your own.
Contact the customer support: [e-mail] - for assistance.

Page 2
Note: Be sure to set the charging current before inserting the handle into
the vehicle.
5. When using your charger, basic precautions should always be followed,
including the following:
• Read warnings on the charger cord label before operating the charger
for the first time. Read all instructions in this guide before using this
charger.
• Never use the charger with an extension cord.
• Never use the charger with any AC adapter.
• Shock hazard – make sure the plug is fully inserted into the wall outlet
so that there are no exposed blade surfaces.
• Children should be supervised when in the vicinity of the charger
while plugged in.
• To reduce the risk of fire, connect only to a circuit provided with
40 amps maximum branch circuit overcurrent protection.
Charging Display Overview
1. Real-time voltage
2. Charge amount
3. Charging time
4. Unit temperature
5. Real-time current
6. Charging icon
7. Rated current
8. Fault icon
9. Cause of fault
32A36.0℃
32.0A
225.39V
0.05KWH
00:02:29
1
2
3
4
5
6
732A36.0℃
0.0A
225.39V
0.05KWH
00:02:29
Leakage Error
FAULT
9
8

Page 3
2. Press the button to switch on the charging current.
PORTABLE CHARGING BOX
217.84V
0.00KWH
00:00:09
36℃32A
32A
How to Use
1. Plug into the socket.
Note: Ensure the car is parked and the engine is turned off.

Page 4
3. Plug the handle into your EV.
4. Charging begins automatically. While charging, the LED indicator will
blink continuously. Verify the charging status by checking your vehicle
dashboard.

Page 5
5. When the vehicle is fully charged, the LED indicator light will stay solid.
6. Disconnect the handle when the charging is complete by pressing the
release button on the handle and removing it from the vehicle.
Fully Charged
210 V6/6 A+ 0 km

Specifications
For more information, visit:
www.ev-lectron.com
Made in China
Get More Support
Scan the QR code below or email us at [e-mail].
Input/output:
Frequency:
Maximum current:
Cable length:
Plug:
EV connector:
Dimensions:
Weight:
Operating temperature:
100 V - 250 V
50 / 60 Hz
32 A
16 ft (18 ft total reach)
NEMA 14-50
SAE-J1772
16.5 X 13 X 5 in
9.9 lb
-22°F to 122°F