LEDBOX LD1050692 User manual

User Manual
Controller Bluethooth led strip 220V RGB 750W LD1050692
Brief Description:
This controller support IOS 6.0 version and Android version 4.3 above.
It can achieve remote control ,switch light,adjust brightness,CT,Dimmer,music and timer
functions.There are 16 million colors and dozens of light changing modes.In addition.This
controller is designed for LED strips, module etc. After easy installation and settings, you can
use your Phone (IOS 6.0 or Android 4.3 version or above ) to control.It can be used widely in
bedroom ,living room ,entertaining place and operating atmosphere etc.
Technical Specification:
Suitable Phone OS：IOS version 6.0 above orAndroid 4.3 version above.
Group control quantity:8-10 lamps (Router can only connects lights)
Software language：English , Chinese, automatic recognize language according to OS.
Working Temperature:-20℃-60℃
Working Voltage：DC：5V-24V
Output channel: 3CH/RGB,2CH/WC,CC, 1CH/DIM
Effective Remote Distance:it will depends on the router signal transmission
APP installing instruction
：
APP Name：LedBle
IOS:https://itunes.apple.com/cn/app/ledble/id1072007734?mt=8
Android：http://zhushou.360.cn/detail/index/soft_id/3186011
Google play:https://play.google.com/apps/publish/?dev_acc=0980502793508813
5925#MarketListingPlace:p=com.feicanled.ledble
QR Code：

Video Tour：http://v.youku.com/v_show/id_XMTQ0MTU5MDQ5Mg==.html
software application
1. First Bluetooth lamp plugged in, turn on the Bluetooth mobile phone (Settings ->
Bluetooth), enter LedBle software automatically scans all Bluetooth devices and automatically
connect the device

2：The system default has a total of packet, the user can customize the group, in the group
switch is closed, click on the group will enter the search interface to list all devices. This
interface can see the connection status of the Bluetooth device list and device, click Add a
new group, the same device can be added to different groups, click unbind all equipment will
lift the group Figure:
3：Click into the control interface

Long press to modify the color or pattern
4：Long press DIY color and pattern can be edited
Click the appropriate colors and modules, LED will display changes, the slider can adjust
the brightness of the lamp。
5：Click into the built-in interface mode

The following slider can adjust the speed and brightness; can adjust the speed of dynamic
and static can only adjust the brightness。
Click into Userdefined the interface
you can customize the color and status and also adjust the speed
6 Click into DIM interface

7 Click into CT interface
8 Click into MUSIC interface
Click Add Music, Click to select the output of light at different
frequencies

Click Edit color
Here you can edit the output according to your color
Click into Microphone interface
Click the microphone output can be turned off

9 .Click into TIMER interface
Here you can set the opening and closing time of lamps, lighting and open state