Direction for use
Connect the load wire at first, followed by the power wire; Please ensure short circuit can not
occur between wires before turning on the power；
Operation: to ensure that there is no barrier between the remote controller and the receiver.
The function of buttons are shown as below:
Name of key Function description
on Turn on the controller output
off Turn off the controller output
Dynamic mode+ For dynamic mode selection, each time pressing goes to the next dynamic mode
Dynamic mode- For dynamic mode selection, each time pressing return to the last dynamic mode
Static mode+ For static color selection, each time pressing goes to the next color
Static mode- For static color selection, each time pressing return to the last color
White color White color hot key
100% brightness press this key goes to 100% brightness for the present color
Brightness+ Each time pressing brightness +1, 256 levels in total, long-pressing can get fast adjustment
Brightness- Each time pressing brightness -1, 256 levels in total, long-pressing can get fast adjustment
Speed+ Each time pressing speed +1, 100 levels in total, long-pressing can get fast adjustment
Speed- Each time pressing speed -1, 100 levels in total, long-pressing can get fast adjustment
Automatic cycle All dynamic modes are automatically circulating in order
3Page of 5
