LEDIN LED line 248160 User manual

USER MANUAL
LED line® MULTI CONTROLLER RGBW 4CH LC 12-24V DC 10A WIFI
Product code: 248160

Thank you for choosing LED line® MULTI CONTROLLER RGBW. Before use please read the user manual, to
ensure that the device functions properly and to avoid any damage caused by improper usage. It is
necessary to confirm that the device was not damaged during transport, if there is any indication of
sustained damage please inform the supplier and refrain from using the product.
This product is under 24-month warranty since the day of the purchase. During aforementioned period,
if used according to the user manual, any detected manufacturing faults will be repaired or the device will
be replaced under this warranty. If the purchaser operates this device in violation of guidelines included
in the user manual the warranty does not apply and purchaser is entitled to cover cost of transport and/or
repairs.
ONLINE WiFi CONFIGURATION MANUAL:
LED line®LC MULTI CONTROLLER 10A RGBW
1. Download the „LED line®LC”app through QR code, from iOS App Store or Android Google Play.
2. Install the „LED line® LC” app on your mobile device running Android or iOS system.
3. Connect desired LED strip to controller’s clamps, the device has common +.
4. Connect the power to the controller with 5,5-2,1mm plug or + / - clamps.
5. In order to connect LED line® MULTIWHITE™ strip the “L1”cable should be connected to “W”
clamp on the controller and the “L2”cable should be connected to “B”clamp on the controller.

Pic. 1 Pic. 2 Pic. 3
6. Turn on the app and go to the “Connections” menu, then enter your phone’s network settings and
connect to the WiFi network generated by the controller (picture 1, 2 and 3).
7. Next go back to the app and click the „Join Router”button.
8. The app will ask you for network’s name (SSID) and password (Pic. 4).
9. The controller will connect to the selected network when correct password is provided (Pic. 5).
Pic. 4Pic. 5

10. You can confirm whether the pairing process is successful in the „Online Devices”menu, where the
controllers that we are pairing with should be visible (Pic. 6).
11. In this menu it is possible to change the name of visible devices, disconnect them from the router or
control them individually (Pic. 7).
Pic. 6Pic. 7
12. Go to the “Scenes” menu and click on the “+” button in the upper right corner (Pic. 8).
Pic. 8

13. Add new scene e.g. „Bedroom”and save it using „Save”button (Pic.10). Next enter created scene
and click the plus „+” button (Pic. 11). The app will list all available devices. Choose one or more
controllers for selected scene and finish by clicking the „ok” button (Pic.12). Note: If you add two or
more devices you will control all of them at the same time.
Pic. 10 Pic. 11 Pic.12
14. Click the „Control” button and use the app. Below you will see several available options.
RGB colour change Dimming Multiwhite™ warm and cool
temperature mixing

Default modes Music controlled mode Voice controlled mode
This device is labelled with a crossed out wheelie bin symbol with a single black line
underneath (WEEE), as required by the European Community Directive 2012/19/UE made on
04.07.2012 and with an act from 11.09.2015 regarding all types of electrical goods. This
symbol concerns used electrical and electronic appliances, therefore, this product may not be
disposed of with normal household waste. The user is responsible for disposal of this
equipment through a designated waste electrical and electronic equipment collection.
Through the waste disposal organization that serves mentioned services you are actively
helping to avoid harmful effect on the environment by avoiding inappropriate disposal of
dangerous components.
RESPONSIBLE COMPANY:
LEDIN Sp. z o.o., Kołobrzeska 15/B, 07 - 410 Ostrołęka, NIP:7582357808