Steps to disassemble the Flashlight.
1. Remove the Tailcap (part 1-4) and the Battery from the flashlight.
2. Disassemble the flashlight into 3 parts. Unscrew the head assembly (part 6 till 13) and the barrel (part 5)
from the charging module (part 11).
The charging module might be stuck either in the head assembly or the barrel. Please gently remove this
part. If it does not want to be removed please check the extended video.
3. Remove the Face Cap, the Glass Lens (part 15-17) and the Reflector (part 14).
4. Push the switch button and press the Switch Assembly with Switch (part 9) out of the Center Housing (part
6). Next push the switch button again and this time press the switch itself out of the assembly.
!NOTE! There are different switches each with their own difficulties.
- Some older models have a big spring fixed to the front of the switch, please cut it gently of with pliers.
- If the switch has a white button; prevent it from “exploding” after it is pushed out. Keep the two halves
pushed together and immediately go to the next step.
- The newest 3 mode switch has a small spring that will fall out once the switch is removed. Without the
spring the switch will not work.
