
3
ENGLISH
Use
Install batteries
The battery holder (3) is placed at the bottom of the candle. Press down the latch (2)
and open the battery lid. Insert two AA batteries in the battery holder (3). Make sure the
batteries are placed correctly (mind the polarity).
Power on/off
To turn the light on and off, use the [On/off/timer] switch (4) at the bottom of the candle.
If you set the switch to timer the lamp will be active for 8 hours.
Safety information
Replace an empty battery with a battery of the same or corresponding type only. Return
used batteries to your local battery recycling.