LeeLen 15 Series User manual

Model No.15C flush mount
93X168X52(mm)
Model No.15D flush mount,
card reader. 93X168X52(mm)
1. Door stations
User’s manual
(Door stations )
JB-304
Model No.15 serie s
2. Technical parameters
3. Structure
4. Installation
Camera:
Viewing angle:
Lens:
Resolution:
Min. illumination:
Video output:
Audio SNR:
Audio distortion:
Standby current:
Working current:
Working voltage:
Environment temperature:
1/3” SONY CCD or 1/3” CMOS
92°
F=3.6
420TV Line
0.01 LUX
1Vp-p/75Ω
≥25dB
≤7%
≤60mA
≤230mA
DC18V±10%
-40℃～+45℃
LEDs
Camera
Light sensor
Cast aluminium panel
Speaker
Name tag
Call button
Microphone
Screw
Screw
Card reader
inside
a. Produce a groove
on a proper position of the wall( ).
b. Take off the door panel from the box
with the enclosed screw driver( ).
c. Fix the box in the groove with screws
and expansion plugs or cement( ).
d. Fix the door panel in the box with the
screws( ).
(75x150x50mm)
①
②③
①
④
Door panel
Box
expansion plugs
②
①
③
B. Use cards to release doors
5. Operation on door stations
A. Call residents
1

6. Door station list
Product p odel numbers Sizes: L x W x D (mm) Exclusive featureshotos Model names Series m
102X175X39
C A L L
MIC
JB-304MGCQ-S15
Model No.15A
Model No.15B
Model No.15C
Model No.15D
Model No.18
JB-304MNCW-S15 With name tag and surface mount
With card reader and surface mount
With card reader and flush mount
With name tag and flush mount
JB-304MNCQ-S15
JB-304MCQ-S18A
JB-304MGCQ-S18A
JB-304MGCW-S15
93X168X52
93X168X52
79X148X45
79X148X45
With keypad
With keypad and card reader
XIMAN LEELEN TECHNOLOGY CO.,LTD.
65, SUNBAN SOUTH ROAD, JIMEI, XIAMEN, 361021 CHINA
This appliance shall not be disposed together
with the normal waste. It must be recycled.
Atitude during opertion below 2000m.
2

FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.