Lefroy Brooks Y1-1055 User manual

INSTALLATION INSTRUCTIONS
Y1-1055
BLACK HAND SHOWER
Y1-1056
WHITE HAND SHOWER
Y1-1057
METAL-FINISH HAND SHOWER
Y1-1057
Y1-1056Y1-1055

2
Dimensions in Inches (& Millimetres)
Whilst every effort is made to ensure accuracy, design and dimensions are subject to
change without notice as part of the company’s product development process.
Y1-1055, Y1-1056, Y1-1057
4 1/16"
4 13/16"
2 7/8"
8 11/16"
1/2-14NPSM
Ø3"
3/8"
7 3/16"
(102.6mm)
(122.6mm)
(72.5mm)
(220.9mm)
(Ø76.5mm)
(10mm)
(182.6mm)

3
What you need to know
Adjustable Wrench
Groove Joint Pliers
Hacksaw
Phillips Screwdriver
Pipe Tape
Spatula
Spirit Level
Your new bathroom faucet is designed for years
of trouble-free performance.
Keep it looking new by cleaning it periodically with
a soft cloth. Avoid abrasive cleaners, wire wool and
harsh chemicals as these will dull the finish and
void your warranty.
If you are soldering during faucet installation,
remove cartridges, seats, gaskets and washers
prior to applying flame, otherwise you will void
the warranty.
Cover drain openings to avoid losing small parts.
When cutting or soldering pipe, use safety glasses
to protect your eyes.
Correct installation may vary depending on previous faucet installation. All necessary supplies required for
faucet installation are not included, but may be found where plumbing supplies are sold. It is suggested that
IAPMO and/or CSA approved plumbing supplies are used during installation.
Prior to beginning installation. turn off the cold and
hot water lines and open the old faucet to release
built-up pressure.
Overtightening nuts may cause damage.
Wrap all threaded connections with pipe tape
available at your local plumbing supply store.
Always wrap in a clockwise direction. The fittings
should be installed by a state-licenced plumber.
Tools: Maintenance
Safety Tips
Things You May Need
Important Points
Standards Flow Rate
Please note :
Final achievable flow rate is dependent on the outlets fitted, see relevant outlets (spouts, roses, sprays) for fully
assembled product flow rate.
IAPMO/cUPC Listed (all variants)
Meets A112.18.1 (all variants)
1
2
3
20 40 60 80PSI

4
Steps 1
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
Tighten the handshower to a shower hose
(which is not included in this product
package) by hand.
Please note:
When there is a difference in water pressure between hot and cold supplies to the mixing valve, the pressures
should by equalized by a plumber in accordance with best practice and legislation.
This product requires the installation of certified atmospheric vacuum breaker (AVB) installed in-between the
shut off valve and hose inlet. The AVB should be installed so its vent ports are not pointing in an upward
direction. Should you be unfamiliar with an AVB, we recommended consulting a plumbing professional.
valve AVB HOSE

5
Exploded View
Parts List
Y1-1055
Shower head (112695)
Blocker (112693)
O-ring (004037N)
Shower arm assembly (020307)
O-ring (004509)
Adaptor (057263)
Handle grip (112607)
Check-valve (519236)
Spring (112694)
1
2
3
4
5
6
7
8
9
1
2
4
7
5
8
9
3
6