LEGRAND SANUS ELITE BSWME2 User manual

Era 100™Era 300™
Texto en español, página 38
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
US: [phone] We’re ready to help!
BSWME2
Tilt & Swivel Speaker Wall Mount
For SONOS®Era 100™ and Era 300™
INSTRUCTION MANUAL

2
5 lbs.
(2.2 kg) 10 lbs. (4.5 kg)
Speaker Weight Limit
DO NOT EXCEED
Tools
Needed
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder Screwdriver Drill Bit
Electric Drill
Hammer Drill Bit
1/4 in.
(6.5 mm)
Masonry
1/4 in.
(6.5 mm)
1/8 in.
(3 mm)
Wood
Drywall Install
Hammer Drill Bit
CAUTION: Avoid potential personal injuries and property damage!
•Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
•Please read through these instructions completely to be sure you’re comfortable with this easy install process.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
• The wall must be capable of supporting five times the weight of the speaker and mount combined.
• If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at [phone].
This stand is designed to support only Sonos® Era 100™ and Era 300™ speakers.
Before getting started, let’s make sure this product is perfect for you!
IMPORTANT SAFETY INSTRUCTIONS
—PLEASE READ ENTIRE MANUAL PRIOR TO USE —SAVE THESE INSTRUCTIONS
Sonos®
Era 100™
Sonos®
Era 300™

3
Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
EraTM 100 Speaker . . . . . . . . . . . . . . . . . . . . . 6-21
Instructions
EraTM 300 Speaker. . . . . . . . . . . . . . . . . . . . 22-37
Instructions
Texto en español . . . . . . . . . . . . . . . . . . . . 38-39

4
Supplied Parts and Hardware
b
a




Era 100™
Era 100™
Era 300™
Era 300™



STEP 1
Wall Mount
Era 100™ Speaker Bracket
Era 300™ Speaker Bracket
Speaker Bracket
Assembly Screw
01 x1
02 x1
03 x1
04 x1
Quantities shown are for one speaker mount.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service. Never use damaged parts!

5
b
a




Era 100™
Era 100™
Era 300™
Era 300™



STEP 4
Wall Plate Screw
Wall Plate Screw
Wall Cap
Speaker Screw
Speaker Screw
Wall Plate
Drywall / Concrete Anchor
Drywall / Concrete Anchor
08 x2
10 x2
07 x1
09 x2
11 x2
12 x1
05 x1
06 x2
STEP 3STEP 2

6
For SONOS®Era 100™
Pages 6-21

7



  








3.00in
76.1mm
0.26in
6.6mm
1.73in
44mm
0.22in
5.6mm
3.50in
88.9mm
3.94in
100mm
7.36in
186.9mm
0.84in
21.3mm
1.17in
29.8mm
2.31in
58.8mm
2.64in
66.9mm
5.88in
149.3mm
2.32in
59mm
1.97in
50mm
4.04in
102.7mm
Dimensions

8
Assemble Brackets STEP 1
04
02
01
12
BELOW
Eye Level
Installation

9
Assemble Brackets
02
04
01
12
ABOVE
Eye Level
Installation
(Speaker Upside Down)

10
Attach Speaker to Bracket STEP 2
1
01

11
Attach Speaker to Bracket
2
05
02

12
CAUTION: Avoid potential personal injury or property damage!
●Drywall covering the wall, must not be less than 1/2 in. (12.7 mm)
Min. 1/2 in.
(12.7 mm)
STEP 3-A Drywall Only InstallationAttach Wall Plate to Wall
1 2
1/4 in.
(6.5 mm)
1 in. (2.5 cm) 3
09
07

13
Go to STEP 4, PAGE 18.
DO NOT use power tools for this step.
Both screws 08 MUST BE firmly tightened to prevent unwanted movement of the wall plate 07 .Ensure the wall plate is securely fastened to the wall before continuing
on to the next step, but DO NOT overtighten the screws.
CAUTION: Avoid potential personal injury or property damage!
4
08
07
09
0808
07

14
●Drywall covering the wall, must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
●Stud center must be verified
Max. 5/8 in.
(16 mm)
CAUTION: Avoid potential personal injury or property damage!
1 2 3
1/8 in.
(3 mm)
1 ¾ in. (4.5 cm)
STEP 3-B Wood Stud InstallationAttach Wall Plate to Wall
07

15
DO NOT use power tools for this step.
Both screws 08 MUST BE firmly tightened to prevent unwanted movement of the wall plate 07 .Ensure the wall plate is securely fastened to the wall before continuing
on to the next step, but DO NOT overtighten the screws.
CAUTION: Avoid potential personal injury or property damage!
Go to STEP 4, PAGE 18.
08
08
07
4
08
07
Wood Stud Installation

16
●Mount the wall plate 07 directly onto the concrete surface (no wall covering)
●Minimum solid concrete thickness: 8 in. (203 mm)
●Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)
CAUTION: Avoid potential personal injury or property damage!
1 2
1/4 in.
(6.5 mm)
2 in. (5 cm)
3
09
STEP 3-C
Solid Concrete or Concrete Block Installation
Attach Wall Plate to Wall
07

17
DO NOT use power tools for this step.
Both screws 08 MUST BE firmly tightened to prevent unwanted movement of the wall plate 07 .Ensure the wall plate is securely fastened to the wall before continuing
on to the next step, but DO NOT overtighten the screws.
CAUTION: Avoid potential personal injury or property damage!
08
08
07
4
08
07
09
Solid Concrete or Concrete Block Installation

18
1
Mount Assembly to Wall Plate STEP 4
01
07

19
2
Mount Assembly to Wall Plate
01
12 12

20
Adjustments
TILT DOWN TILT UP SIDE TO SIDE