LEGRAND SANUS WSSE31 User manual

WSSE3 1 / WSSE32
Speaker Stand
For SONOS®Era 300™
INSTRUCTION MANUAL
Texto en español, página 12 Deutscher Text Seiten 16 Svensk text sida 20 中文文字说明请参见第 24 页
Texte français page 14 Nederlandse tekst op pagina 18 Русский текст: стр. 22 日本語は 26 ページ
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
US: [phone] • EMEA: [phone] • UK: [phone]
We’re ready to help!

2
CAUTION: Avoid potential personal injuries and property damage!
•Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
•Please read through these instructions completely to be sure you’re comfortable with this easy install process.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
• If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at US: [phone] • EMEA: [phone] • UK: [phone].
Before getting started, let’s make sure this product is perfect for you!
This stand is designed to support only Sonos® Era 300™ speakers.
10 lbs.
(4.5 kg)
Speaker
Weight Limit
DO NOT
EXCEED
Tool Needed
Screwdriver
IMPORTANT SAFETY INSTRUCTIONS
—PLEASE READ ENTIRE MANUAL PRIOR TO USE —SAVE THESE INSTRUCTIONS

3
Dimensions












 







 



 
 


  


STEP 2 STEP 3 STEPS 4 and 5
STEP 6
4
Parts and Hardware
NOTE: Not all hardware included will be used. Quantities shown are for one speaker stand.
OPTIONAL
Base
Pillar Screw
Lock
Washer
Top Plate Speaker Screw
Carpet Spike
Jam Nut
Rubber Pad
Clip
Pillar
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service. Never use damaged parts!
x1
01 x2
04
x2
03
x1
02 x4
05
x4
06 x4 07
x1
08 x3
09
x2
10

Route Cable(s) STEP 1
02
5
Attach Base to Shaft STEP 2
01
02

03

04
2 X
2 X

6
Install Rubber Pads -or- Carpet Spikes STEP 3
Optional Carpet Spikes
Rubber Isolation Pads
Twist rubber pads 05 into the base 02 .
WARNING: The
ends of carpet spikes
06 are sharp and
may scratch flooring,
damage wiring, or be
hazardous to children.
02
02
05
OR
07 06
===
HEIGHT ADJUST
07
06

7
Attach Top Plate to Pillar STEP 4
CAUTION:
Do not overtighten.
08
01
M5 x 12mm
09

8
Install Speaker STEP 5
M5 x 12mm
09
2 X

9
Secure Cable(s) STEP 6
10

10
enjoy