LEGRAND SANUS WSWME11-W2 User manual

WSWM E31 and WSWM E32
Tilt & Swivel Speaker Wall Mount
For SONOS®Era 300™
INSTRUCTION MANUAL
Texto en español, página 20 Deutscher Text Seiten 24 Svensk text sida 28 中文文字说明请参见第 32 页
Texte français page 22 Nederlandse tekst op pagina 26 Русский текст: стр. 30 日本語は 34 ページ
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
US: [phone] • EMEA: [phone] • UK: [phone]
We’re ready to help!

2
CAUTION: Avoid potential personal injuries and property damage!
•Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
•Please read through these instructions completely to be sure you’re comfortable with this easy install process.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
• The wall must be capable of supporting five times the weight of the speaker and mount combined.
• If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at [phone] (EMEA: [phone]; UK: [phone]).
10 lbs.
(4.5 kg)
Speaker Weight Limit
DO NOT EXCEED
Tools
Needed
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder Screwdriver Drill Bit
Electric Drill
Drill Bit
3/8 in.
(10 mm)
Masonry
3/8 in.
(10 mm)
1/8 in.
(3 mm)
Wood
Drywall Install
Drill Bit
This mount is designed to support only Sonos® Era 300™ speakers.
Before getting started, let’s make sure this product is perfect for you!
IMPORTANT SAFETY INSTRUCTIONS
—PLEASE READ ENTIRE MANUAL PRIOR TO USE —SAVE THESE INSTRUCTIONS

3



  



4 deg
UP TILT
32 deg
DOWN TILT
4.04in
102.6mm
32deg
32deg
4.82in
122.4mm
4.91in
124.8mm
6.89in
175.1mm
2.32in
59mm
1.97in
50mm
0.84in
21.3mm
1.17in
29.8mm
3.00in
76.1mm
0.26in
6.6mm
1.73in
44mm
0.22in
5.6mm
3.50in
88.9mm
Dimensions

4
Supplied Parts and Hardware
b
a




STEP 1
Wall Mount
Speaker Bracket
Bracket Assembly
Screw
01 x1
02 x1
03 x1
Quantities shown are for one speaker mount.
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service. Never use damaged parts!

5
b
a




STEP 4
Wall Plate Screw
Wall Cap
Speaker Screw
Wall Plate
Drywall / Concrete Anchor
06 x2
05 x1
07 x2
08 x1
04 x2
STEP 3STEP 2

6
Assemble Brackets STEP 1
03
02 01
08
BELOW
Eye Level
Installation

7
Assemble Brackets
03
02
01
08
ABOVE
Eye Level
Installation
(Speaker Upside Down)

8
Attach Speaker to Bracket STEP 2
1
02
02

9
Attach Speaker to Bracket
2
04
04
02
02

10
CAUTION: Avoid potential personal injury or property damage!
●Drywall covering the wall, must not be less than 1/2 in. (12.7 mm)
Min. 1/2 in.
(12.7 mm)
STEP 3-A Drywall Only InstallationAttach Wall Plate to Wall
1 2
3/8 in.
(10 mm)
1 in. (2.5 cm) 3
05
07