LEGRAND Galaxy User manual

Galaxy Installation Manual
SERVERS
■ Server unit (x 1)
■ Antenna (x 2)
■ Mains power supply adapter and cable-Black (x 1)
■ Mounting screws (x 4 pcs)
■ Server unit (x 1)
■ Antenna (x 2)
■ Mains power supply adapter and cable - Black (x 1)
■ Connectors - Green (x 3)
■ Mounting bracket (x 2)
■ Mounting screws (x 4 pcs)
Power button LED indicator
■ Amber - Standby power
■ Blue - Power ON
■ OFF - Power OFF
HDD LED
■ Flashing during hard drive activity
PWR LED indicator
■ Green - Power ON
■ OFF - Power OFF
4 LAN Ports
Power button LED indicator
■ Blue - Power ON
■ OFF - Power OFF
2 LAN Ports (Small server)
Large server (Cat. No: 659182)
Medium server (Cat. No: 659181) / Small server (Cat. No: 659180)

Galaxy Installation Manual
STATIONS
■ Station unit (x 1)
■ Antenna (x 1)
■ Mains power supply cable (x 1)
■ Wall Mounting bracket with screws (x 1)
■ Station unit (x 1)
■ Earthing wire and glands (x 1)
■ Large Antenna (x 1 Large Station only)
■ Antenna cable (x 1 Large Station only)
■ Antenna Adapter (x 1 Large Station only)
■ POE injector with power cable (x 1)
■ Wall Mounting bracket with screws (x 1)
LED1
LED2 LED3
LED 1 - Power
■ Red (Blinking) - During system initialisation
■ Green (Blinking) - During system initialisation
■ Green - When initialisation is complete
LED 2 - Communication
■ Red - During system initialisation / Communication
disconnected
■ Green (Blinking) - During communication initialisation
■ Green - Communication established
LED 3 - Communication traffic
■ Red - During initialisation
■ Green (Blinking) - Indicated data is being received
■ Red (Blinking) - Indicated data is being sent
Small Station (Cat. No: 659183)
Large Station (Cat. No: 659185) / Medium Station (Cat. No: 659184)
LED Indications
■ Green - Power ON
■ Red (Blinking) - During system initialisation
■ OFF - When initialisation is complete
Large station
Medium station
Green LED Red LED
Station mounting bracket must be installed
before the station is mounted onto the wall
mounting bracket.

Galaxy Installation Manual
MOUNTING BRACKETS
Large station mounting
Medium station mounting
Small station mounting
WITHOUT ADAPTER WITH ADAPTER

Earthing the Medium and Large Stations
The station is provided with a green/yellow cable for earthing. A pre-existing screw hole is available on the metal
enclosure of the station, marked with an earth symbol (as shown).
Earthing the Station mounting bracket
It is strongly recommended to earth the station mounting bracket to prevent surges that may damage the station.
Earthing can be completed by:
■Pole mounting: By using the metallic strapping.
■Wall mounting: By using M4 screws (provided). The earthing connection is done through a ring terminal. A specific
crimping tool is required to perform the operation. The earthing cable must be crimped inside this
ring terminal.
■ Isolate 240 V mains supply before maintenance or installation.
■ None of the devices should be switched On/OFF after installation.
■ Follow the LED indicator functions.
■ Make sure the antenna is pointing vertically upwards (Large station only).
■ The antenna should be placed away from the walls and surfaces in order to perform effectively (Large station only).
■ Please note that mounting bracket must be installed to achieve optimum performance.
■ Secure the stations onto the mounting bracket onto the desired wall or structure before connecting.
Galaxy Installation Manual
Things to consider before/after installation
Earthing Galaxy Stations and Accessories
Connect to the unit
Connect to installation earthing structure

Galaxy Installation Manual
1. Plug the power cord of all units into the power outlet (Do not turn ON).
2. Connect the Server, POE and Station to an available ethernet socket outlet. Ensure that the Server and Stations
are on the same subnet (local IT may need to assist).
3. Turn ON the power at the outlet and the Server will automatically turn ON.
Note: Contact Legrand prior to installation and for commissioning.
Ethernet connectivity
Ethernet connection
Note: Maximum distance between POE injector and the station should be < 100 m.
Large Station
Small Station
Large Server
POE injector
IN OUT

Galaxy Installation Manual
1. Plug the power cord of all units into the power outlet (Do not turn ON).
2. Make a direct connection from the Server to the Station using the Legrand yellow Cat 6 cable (Cat. No. 659187).
Stations are wired back as a star formation to the Server if there is more than one Station on site. A galaxy LAN
extender accessory (Cat. No: 659187) must be used if the distance between the Server and Station exceeds 100 m.
3. Turn ON the power at the outlet and the Server will automatically turn ON.
Note: Contact Legrand prior to installation and for commissioning.
Direct connection
Large Station
Small Station
POE injector
Large Server
IN
OUT

Ethernet extender kit (Cat. No: 659188)
Application diagram
Galaxy Installation Manual
LE12635AB 03/2021
Warranty
Legrand Australia Pty Ltd warrants this product for a period of 5 years from the date of purchase.
These goods come with guarantees that cannot be excluded under the Australian and New Zealand
Consumer Laws. You are entitled to a replacement or a refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired
if the goods fail to be acceptable quality and the failure does not amount to a major failure.
Paper
GALAXY ACCESSORIES
LED indication
ON: Power good ON: Link
FLASH: Activity
The green LED may blink quickly while connecting (for extremely long runs, it may take a few seconds to optimise the link).
POE Status (Green)
In normal operation, the LEDs will display the power available in flashing or steady green:
510 15 20 25
POE power available for station (or other POE-compliant device) in watts.
ON = POE enabled to station
FLASH = POE not enabled, no compliant device detected
Cat 6 (Cat.No 659187)
1.8 m
POE Injector
Galaxy Server
Galaxy Station
Power
Supply
The power level is displayed after the station-side unit has powered up. Available power depends on the cable length, cable
gauge,and the POE source used.
Customer Service
For all Customer Service and Technical Support enquires
please call Monday to Friday during business hours.
Legrand Australia
1300 369 777
www.legrand.com.au
Legrand New Zealand
0800 476 009
www.legrand.co.nz
ABN: 31 000 102 661