
UTILIZING WIRELESS PROBES WITH BLUETOOTH II TECHNOLOGY
Quick Guide for Neoprobe GDS System
2A LINKING WIRELESS
PROBE TO CONSOLE
(subsequent links to same unit)
1.
1.
2.
2.
1. To conserve battery power, probe will go into sleep mode
if no radiation has been detected or if the Probe Button
has not been pressed for 10 minutes.
2. Press Probe Button to “awaken.” Probe will automatically
relink to console within five seconds.
RELINKING THE PROBE
AFTER SLEEP MODE
2B
Probe
Button
1. Press Power Button on console. Confirm “ ”
is displayed on the screen.
2. Power up probe by pressing Probe Button. It will
automatically link to console within five seconds.
Probe
Button
Power
© 2019 Devicor Medical Products, Inc., part of Leica Biosystems.All rights reserved.
Mammotome and Neoprobe are registered trademarks of Devicor Medical Products,
Inc., part of Leica Biosystems,in the USA and optionally in other countries.
Other logos, product and/or company names might be trademarks of their
respective owners. MDM# 15-0032 Rev 05/19
Please contact your Mammotome representative:
DEVICOR Medical Europe GmbH • Südportal 5
D-22848 Norderstedt, Germany
Phone: +49 (0) 40-59 35 59 10
Fax: +49 (0) 40-500 98 940
www.mammotome.com
C
M
Y
CM
MY
CY
CMY
K
MAM150032_NeoprobeQuickRefGuide_Rev5-19_EN_high.pdf 2 16.05.2019 11:09:24