Lemona 70200051 User manual

4 in 1 Universal RF+Bluetooth LED Controller 70200051
Input
Voltage Remarks
Output
Current
12-48VDC Constant voltage
Output
Power
Function introduction
Important: Read All Instructions Prior to Installation
Product Data
Size(LxWxH)
170x59x29mm
• DO NOT install with power applied to device.
• DO NOT operate the dial switches for device mode selection with power applied to device.
• DO NOT expose the device to moisture.
Safety & Warnings
CH1:R/R/WW/1 output(-)
CH2:G/G/CW/2 output(-)
Program Key: for pairing & delete pairing with RF+Bluetooth remotes
• 4 in 1 universal RF+Bluetooth LED controller, radio frequency: 2.4GHz
• 4 different device modes DIM, CCT, RGBW and RGB+CCT in 1 controller, and selectable by dial switch
• Enables to control ON/OFF, light intensity, color temperature, RGB color of connected LED lights
• Ultra powerful to control Single Color, CCT, RGBW, RGB+CCT LED strips
• Controlled through both smart App and remote controls, no gateway required
• Easy & quick pairing to the smart App by simply pushing the Prog. button
• Mesh network, much longer control distance, transmits received signal to neighbor devices
• Up to 30m transmission distance between every two neighbor devices
• Encrypted two-way communication, quick status feedback, safe & reliable data transmission
• Compatible with universal RF+Bluetooth remotes, each LED controller can pair to max. 8 remotes
• Cloud control is available for remote access, works with Amazon Alexa and Google Home
• Waterproof grade: Ip20
CH3:B/B/WW/3 output(-)
CH4:WW/W/CW/4 output(-)
CH5:CW/NC/NC/5 output(-)
Ambient
Temperature
-20℃ ~ +50℃
Dial switch for device mode
selection, DIM, CCT, RGBW
and RGB+CCT 4 modes are available,
factory default is RGB+CCT mode
NC = No Connection
LED indicator, normally stays off, flashes when receives control signal
Max. Casing
Temperature
75℃
Pair/delete the pairing with RF+Bluetooth remote
1. Do wiring according to connection diagram.
2. Pair LED controller with RF+Bluetooth remote: please refer to the instruction of the remote that you would
like to pair with.
3. Delete the pairing:
(1) Wire up the LED controller correctly, power on.
(2) Press and hold down the “ Prog.” button on the controller for over 3 seconds until the connected light
flashes, which means well deleted.
Operation
Pair with smart APP
1. Do wiring according to connection diagram.
2. Please refer to the EasyThings App user manual for details of adding device.
Wiring Diagram
RGB+CCT Mode
Note: please make sure the dial switches are at position for RGB+CCT mode as shown in above diagram.
DC power input
Common Anode Output(+)
SR-BUS LED Controller
Prog .
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC INP UT
LED OU TPUT
ta=- 20℃- +5 0℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON
Max. 8A/CH@12V/24V
Max. 6A/CH@36V
Max. 4A/CH@48V
Max. 96W/CH@12V
Max. 192W/CH@24V
Max. 216W/CH@36V
Max. 192W/CH@48V
Max. 20A
Connector
Current Rating Wire Size
2
0.05-3.3mm
(12-30AWG)
L
N
GV+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V/48V
CV PSU
RGB LE D Strip
V+ V+
R- R-
G- G-
B- B-
CCT LE D Strip
V+ V+
WW- WW-
CW- CW-
SR-B US LE D Contr oller
Pro g.
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC IN PUT
LED O UTPUT
ta= -20℃- +50℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON
1) When total load of each receiver is not over 20A
2) When total load of each receiver is over 20A
L
N
GV+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V/48V
CV PSU
RGB LE D Strip
V+ V+
R- R-
G- G-
B- B-
CCT LE D Strip
V+ V+
WW- WW-
CW- CW-
SR-B US LE D Contr oller
Pro g.
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC IN PUT
LED O UTPUT
ta= -20℃- +50℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON

RGBW Mode
Note: please make sure the dial switches are at position for RGBW mode as shown in above diagram.
L
N
GV+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V/48V
CV PSU
SR-B US LE D Contr oller
Pro g.
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC IN PUT
LED O UTPUT
ta= -20℃- +50℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON
1) When total load of each receiver is not over 20A
2) When total load of each receiver is over 20A
L
N
GV+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V/48V
CV PSU
SR-B US LE D Contr oller
Pro g.
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC IN PUT
LED O UTPUT
ta= -20℃- +50℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON
V+ V+
R- R-
G- G-
B- B-
W- W-
RGBW LED Strip
V+ V+
R- R-
G- G-
B- B-
W- W-
RGBW LED Strip
CCT Mode
1) When total load of each receiver is not over 20A
L
N
GV+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V/48V
CV PSU
SR-B US LE D Contr oller
Pro g.
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC IN PUT
LED O UTPUT
ta= -20℃- +50℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON
CCT LE D Str ip
V+ V+
WW- WW-
CW- CW-
CCT LE D Str ip
V+ V+
WW- WW-
CW- CW-
2) When total load of each receiver is over 20A
L
N
GV+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V/48V
CV PSU
SR-B US LE D Contr oller
Pro g.
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC IN PUT
LED O UTPUT
ta= -20℃- +50℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON
CCT LE D Str ip
V+ V+
WW- WW-
CW- CW-
CCT LE D Str ip
V+ V+
WW- WW-
CW- CW-
Note: please make sure the dial switches are at position for CCT mode as shown in above diagram.
DIM Mode
1) When total load of each receiver is not over 20A
V+ V+
1- V-
V+ V+
2- V-
V+ V+
3- V-
V+ V+
4- V-
V+ V+
5- V-
L
N
GV+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V/48V
CV PSU
SR-B US LE D Contr oller
Pro g.
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC IN PUT
LED O UTPUT
ta= -20℃- +50℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON
2) When total load of each receiver is over 20A
V+ V+
1- V-
V+ V+
2- V-
V+ V+
3- V-
V+ V+
4- V-
V+ V+
5- V-
SR-B US LE D Contr oller
Pro g.
12
DIM
CCT
RGBW
RGB+CCT
V+
V+
V-
V-
DC IN PUT
LED O UTPUT
ta= -20℃- +50℃
Uin:12-24V Iout:8Ax5ch Max:8A/ch Pout:96-192W/ch
Uin:36V Iout:6Ax5ch Max:6A/ch Pout:216W/ch
Uin:48V Iout:4Ax5ch Max:4A/ch Pout:192W/ch
1- R- R-
2- G- G-
3- B- B-
4- W-
5- NCNC
WW-
WW-
WW-
CW-
CW-
CW-
1 2
ON
L
N
GV+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V/48V
CV PSU
Note: please make sure the dial switches are at position for DIM mode as shown in above diagram.

Product Dimension
170 mm
59 mm29 mm