Lemonda Smart BE1032 User manual

User Manual for Lemonda Smart
BE1032 Waterproof TWS Earphones

Specifications
- Screen: TFT 1,4", 240x240, touchscreen
- Connection: Bluetooth 5.0
- Battery capacity: 160mAh
- Battery life up to 10 days
- Charging time: 2h
- Waterproof rating: IP68
- Supported OS: Android 5.1 and above, iOS 10.0 and above
- Dimensions: 35 x 44 x 11 mm
- Wrist circumference: 130mm - 190mm
- Strap length: 220mm
- Weight: 33g
1. Multifunction button
2. LED indicator
3. Microphone
4. Charging pins
5. Ear caps
6. Charging pins
7. Indicator lights

Pairing
Before the first use, take out the earbuds from the charging case and remove
the stickers from the charging pins. Put them back to the charging case and take
them out once the indicator lights start. The earbuds will automatically power on and
enter the pairing mode. Open the Bluetooth settings on your smartphone, search for
new device and selec BE1032 to complete pairing.
Operations
To Play/Pause the song short press the Multifunction button on left or right
earbud.
To play the previous song double-tap the Multifuction button on the left
earbud.
To play the next song double-tap the Multifuction button on the right earbud.
To answer or end a phone call short press the Multifunction button on left or
right earbud.
To reject the phone call double press the Multifunction button on left or right
earbud.
To increase the volume press and hold the left earbud. To decrease the
volume press and hold the right volume.
The indicator lights on the charging case also indicates how much the
earbuds are charged. So if 1 dot is lit the earbuds are 1%-25% charged, if 2 dots are
lit they are charged 25%-50%, 3 dots means 50%-75%, and if all 4 dots are lit the
earbuds are charger between 75% and 100%.