Lencore SPECTRA PENDENT User manual

Spectra Pendent Speaker Installation Instructions:
1. Refer to the sound masking layout (drawing) provided to locate the appropriate speaker installation position.
2. Secure speaker to wall using supplied bracket.
3. Install Cat 5e cable with standard RJ45 connector into the speaker.
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this document can be
copied, used, or distributed without prior authorization from Lencore. Copyright 2014. Lencore, Spectra, Spectra i.Net, are trademarks
of Lencore Acoustics Corp. www.Lencore.com
1. For first speaker connection to OP: Connect the audio cable– 8 conductor CAT5 from OP channel to INPUT of speaker.
2. For speaker to speaker connection: Connect audio cable– 8 conductor from OUTPUT of previous speaker to INPUT of
next. Follow the same series connections to add up to 8 speakers per channel. The last speaker in any channel will have
only one cable going to its INPUT only. There will be no cable connected to the output.
SPECTRA PENDENT SPEAKER - WALL MOUNT
INSTALLATION INSTRUCTIONS
Spectra Pendent Speaker Wiring Instructions:

For additional Technical Support call: 516-682-9292
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this document can be
copied, used, or distributed without prior authorization from Lencore. Copyright 2014. Lencore, Spectra, Spectra i.Net, are trademarks
of Lencore Acoustics Corp. www.Lencore.com
SPECTRA PENDENT SPEAKER - WALL MOUNT
INSTALLATION INSTRUCTIONS

The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be
copied, used or distributed without prior authorization from Lencore Acoustics Corp. ©Copyright 2015
-1-
Important Safety Instructions
WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as if the cord is damaged; liquid has
been spilled into the apparatus; the apparatus has been exposed to rain or moisture;
does not operate normally; or has been dropped.
11. Follow COMPLETE instructions for wiring the sound masking system and ALL system
checks before powering the system on for the first time, to avoid irreversible damage
to the components.