Lenovo IdeaCentre B320 User manual

All-in-One Desktop PC
Version: 2.0
B3 Series
31048801
Before using the accompanied peripherals, carefully read the detailed
information in the Safety and Warranty Guide. Since different models
have different peripherals, you might not find all of the described items
depending on the actual model you purchased.
Note: The remote control cannot turn the computer on and only can
be used for Hardware TV.
Turn on Hardware TV
Turn on computer
Computer instruction
Infra-red (IR) Remote Control Instructions
MODE FREEZE
MENU EXIT
PIP
Built-in microphone
Camera
TV indicator
Hard Disk Drive Indicator
Bluetooth status indicator
WIFI status indicator
Menu button
Direction button
Direction button
LCD On/Off
Power button
Ethernet port
TV tuner port
(Selected models only)
USB ports(5)
Bluetooth reset button
(Only some models are functional)
AV-IN ports
PS/2 keyboard port
Power connector
Channel Up
Channel Down
Volume Up
Volume Down
TV mode menu button
Signal source choice button
TV power On/Off
Optical drive
Card reader
USB port
Headphone port
Microphone port
USB port
Turn on Hardware TV
Press the power button on the side of
the computer to turn the TV on.
Turn on computer
Press the power button on the bottom left
of the screen to turn on the computer.
Button Description
Source (Hardware TV only)
TV ON/OFF (Hardware TV only)
Rewind/Index (The Index and Size functions are usable with TV Tuner cards installed and in
countries that support Teletext functions only.)
Fast forward/Size
Play/Pause
Record
Picture in picture
Information (Hardware TV only)
Button Description
Picture mode (Hardware TV only)
Freeze (Hardware TV only)
Menu (Hardware TV only)
Exit (Hardware TV only)
Open Software TV
Up, Down
Left, Right
OK
Vol Up
Vol Down
Ch/Pg Up
Ch/Pg Down
Mute
Number buttons
Subtitle
Picture size (Hardware TV only)
Sleep timer (Hardware TV only)
Channel switch (Hardware TV only)/
Hold (The Hold and Reveal functions are usable with TV Tuner
cards installed and in countries that support Teletext
functions only.)
Digital signal channel break
(Hardware TV only)/Reveal
Teletext ON/OFF
(These 5 buttons are usable with TV Tuner cards installed
and in countries that support Teletext functions only.)
Red, Green, Yellow, Blue
Teletext keys
MODE FREEZE
MENU EXIT
PIP
31048801 IdeaCentre B3 QR V2.0 (EN)(R).indd 1 2011-1-6 11:26:50

Hardware TV Instructions
4. Alternate PIP
Press the PIP button on the remote control to alternate between the main picture and
sub-picture.
Note: The interface and functions shown in the instructions below are for reference
only.
Note: The touch function cannot be used in Hardware TV mode.
Note: You must be in TV mode to perform these operations.
2. Language settings
Press the MENU button on the remote control, then select Setup -> Menu language.
1. Scan for channels
Press the MENU button on the remote control, then select Setup -> Channels to scan
for channels and store them in the TV automatically.
Note: The default password is "8888". Change the password by using the Password
option.
3. Picture In Picture (PIP) Size
Press the MENU button on the remote control, then select PIP -> Size to adjust the size of
the sub-picture.
TV TV
TV
PC PC
PC
Note: If a channel is locked using the Child Lock function, press the Digital signal
channel break button to unlock it.
Note: The size of the PIP sub-picture can only be adjusted in the main TV mode interface.
Note: When using PIP mode, sound is played for the main program only.
5. Password settings
You need to enter the original password before setting a new password or removing the
password.
The default password is "8888".
Note: If you forget the password you entered, enter the Super Password "1357" to
set a new password.
6. Record TV
The Hardware TV must be turned off in order to use the recording function. Once it is
turned off, use Windows Media Center or the Total Media software in PC mode to record
TV programs.
2.indd 1 2011-4-14 15:08:05