Lenovo ThinkCentre 41N5624 User manual

ThinkCentre and Lenovo
CD-RW/DVD-ROM Combination Drive
(Serial
ATA) User’s Guide

ThinkCentre and Lenovo
CD-RW/DVD-ROM Combination Drive
(Serial
ATA) User’s Guide

Note: Before using this information and the product it supports, read the information
under Appendix E, “Lenovo Statement of Limited Warranty,” on page E-1, Appendix G,
“Notices,” on page G-1, andAppendix H, “Electronic emission notices,” on page H-1.
First Edition (September 2006)
©Copyright Lenovo 2006.
Portions ©Copyright International Business Machines Corporation 2004.
All rights reserved.
U.S. GOVERNMENT USERS –RESTRICTED RIGHTS: Our products and/or services are provided with
RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule
contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is
unable to accept this Program under these terms, then we provide this Program under the provisions set forth in
Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in
Data-General, FAR 52.227.14 (Alternate III).

Safety information: Read first
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat udit product installeert eerst de veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.
Antes de instalar este producto lea la información de seguridad.
©Lenovo 2006. Portions ©IBM Corp. 2004. iii

Läs säkerhetsinformationen innan du installerar den här produkten.
iv ThinkCentre and Lenovo CD-RW/DVD-ROM Combination Drive (Serial ATA) User’s Guide

General safety guidelines
Always observe the following precautions to reduce the risk of injury and property
damage.
Service
Do not attempt to service aproduct yourself unless instructed to do so by the
Customer Support Center. Use only aservice provider who is approved to repair
your particular product.
Note: Some parts can be upgraded or replaced by the customer. These parts are
referred to as Customer Replaceable Units, or CRUs. Lenovo expressly
identifies CRUs as such, and provides documentation with instructions
when it is appropriate for customers to replace those parts. You must closely
follow all instructions when performing such replacements. Always make
sure that the power is turned off and that the product is unplugged from
any power source before you attempt the replacement. If you have any
questions or concerns, contact the Customer Support Center.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product
manufacturer.
Never wrap apower cord around the power adapter or other object. Doing so can
stress the cord in ways that can cause the cord to fray, crack or crimp. This can
present asafety hazard.
Always route power cords so that they will not be walked on, tripped over, or
pinched by objects.
Protect the cord and power adapters from liquids. For instance, do not leave your
cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with
liquid cleansers. Liquids can cause ashort circuit, particularly if the cord or power
adapter has been stressed by misuse. Liquids can also cause gradual corrosion of
the power cord terminals and/or the connector terminals on the adapter which can
eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that
all power cord connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins and/or
shows signs of overheating (such as deformed plastic) at the ac input or anywhere
on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs
of corrosion or overheating or where the power cord appears to have been
damaged in any way.
©Lenovo 2006. Portions ©IBM Corp. 2004. v

Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and
power strips that you use are rated to handle the electrical requirements of the
product. Never overload these devices. If power strips are used, the load should
not exceed the power strip input rating. Consult an electrician for more
information if you have questions about power loads, power requirements, and
input ratings.
Plugs and outlets
If areceptacle (power outlet) that you intend to use with your computer
equipment appears to be damaged or corroded, do not use the outlet until it is
replaced by aqualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer
to obtain areplacement.
Some products are equipped with athree-pronged plug. This plug fits only into a
grounded electrical outlet. This is asafety feature. Do not defeat this safety feature
by trying to insert it into anon-grounded outlet. If you cannot insert the plug into
the outlet, contact an electrician for an approved outlet adapter or to replace the
outlet with one that enables this safety feature. Never overload an electrical outlet.
The overall system load should not exceed 80 percent of the branch circuit rating.
Consult an electrician for more information if you have questions about power
loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible,
and located close to the equipment. Do not fully extend power cords in away that
will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully
Batteries
All personal computers manufactured by Lenovo contain anon-rechargeable coin
cell battery to provide power to the system clock. In addition many mobile
products such as notebook PCs utilize arechargeable battery pack to provide
system power when in portable mode. Batteries supplied by Lenovo for use with
your product have been tested for compatibility and should only be replaced with
Lenovo approved parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate
batteries or short circuit the metal contacts. Do not expose the battery to water or
other liquids. Only recharge the battery pack strictly according to instructions
included in the product documentation.
Battery abuse or mishandling can cause the battery to overheat, which can cause
gasses or flame to “vent” from the battery pack or coin cell. If your battery is
damaged, or if you notice any discharge from your battery or the buildup of
foreign materials on the battery leads, stop using the battery and obtain a
replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some
rechargeable batteries (particularly Lithium Ion batteries), leaving abattery unused
in adischarged state could increase the risk of abattery short circuit, which could
vi ThinkCentre and Lenovo CD-RW/DVD-ROM Combination Drive (Serial ATA) User’s Guide

shorten the life of the battery and can also pose asafety hazard. Do not let
rechargeable Lithium-Ion batteries completely discharge or store these batteries in a
discharged state.
Heat and product ventilation
Computers generate heat when turned on and when batteries are charging.
Notebook PCs can generate asignificant amount of heat due to their compact size.
Always follow these basic precautions:
vDo not leave the base of your computer in contact with your lap or any part of
your body for an extended period when the computer is functioning or when
the battery is charging. Your computer produces some heat during normal
operation. Extended contact with the body could cause discomfort or, potentially,
askin burn.
vDo not operate your computer or charge the battery near flammable materials or
in explosive environments.
vVentilation slots, fans and/or heat sinks are provided with the product for safety,
comfort, and reliable operation. These features might inadvertently become
blocked by placing the product on abed, sofa, carpet, or other flexible surface.
Never block, cover or disable these features.
CD and DVD drive safety
CD and DVD drives spin discs at ahigh speed. If aCD or DVD is cracked or
otherwise physically damaged, it is possible for the disc to break apart or even
shatter when the CD drive is in use. To protect against possible injury due to this
situation, and to reduce the risk of damage to your machine, do the following:
vAlways store CD/DVD discs in their original packaging
vAlways store CD/DVD discs out of direct sunlight and away from direct heat
sources
vRemove CD/DVD discs from the computer when not in use
vDo not bend or flex CD/DVD discs, or force them into the computer or their
packaging
vCheck CD/DVD discs for cracks before each use. Do not use cracked or
damaged discs
General safety guidelines vii

viii ThinkCentre and Lenovo CD-RW/DVD-ROM Combination Drive (Serial ATA) User’s Guide

Contents
Safety information: Read first ..... iii
General safety guidelines .......v
Service ................v
Power cords and power adapters .......v
Extension cords and related devices ......vi
Plugs and outlets ............vi
Batteries ...............vi
Heat and product ventilation ........ vii
CD and DVD drive safety ......... vii
About this book ...........xi
Registering your option ..........xi
Installation and user’s guide ..... 1-1
Product description ........... 1-1
Software description ........... 1-1
Installation requirements.......... 1-2
Before you begin ............ 1-2
Handling precautions ........... 1-2
Drive controls and connectors ........ 1-3
Installing the drive............ 1-3
Step 1. Opening the computer ....... 1-3
Step 2. Unpacking the drive ....... 1-3
Step 3. Mounting the drive in the bay .... 1-4
Step 4. Attaching the cables to the drive and
main board ............. 1-4
Step 5. Completing the hardware installation .. 1-5
Step 6. Updating your computer configuration 1-5
Care and maintenance .......... 1-5
CD safety information ......... 1-5
Caring for aCD or DVD......... 1-5
Caring for the CD-RW /DVD-ROM
Combination Drive .......... 1-6
Manually ejecting adisc ......... 1-6
Installing software ............ 1-6
Playing audio CDs............ 1-7
Configuring the drive for digital playback ... 1-7
Configuring the playback application for digital
playback .............. 1-7
Using WinDVD ............. 1-7
Operating system support ........ 1-7
Starting WinDVD ........... 1-8
Changing the DVD region code ...... 1-8
Using the Multimedia Center for Think Offerings 1-9
Copying and imaging discs ......... 1-9
Using Direct-to-Disc (DLA) ........ 1-10
Appendix A. Product specifications A-1
Appendix B. Problem solving .... B-1
Appendix C. Customizing the
device-driver configuration settings.. C-1
Enabling DMA for Windows 2000 ...... C-1
Enabling DMA for Windows XP ....... C-1
Appendix D. Enabling Digital Audio
Extraction ............. D-1
Appendix E. Lenovo Statement of
Limited Warranty .......... E-1
Part 1-General Terms .......... E-1
Part 2-Country-unique Terms ....... E-4
Part 3-Warranty Information ....... E-15
Warranty Period ........... E-15
Types of Warranty Service ........ E-15
Worldwide telephone list ........ E-16
Guarantee supplement for Mexico ...... E-19
Appendix F. Service and Support ... F-1
Online technical support.......... F-1
Telephone technical support ........ F-1
Appendix G. Notices ........ G-1
Trademarks .............. G-2
Appendix H. Electronic emission
notices .............. H-1
Federal Communications Commission (FCC)
Emission Notice ............ H-1
©Lenovo 2006. Portions ©IBM Corp. 2004. ix

xThinkCentre and Lenovo CD-RW/DVD-ROM Combination Drive (Serial ATA) User’s Guide

About this book
This manual contains instructions for installing and using the ThinkCentre
® and
Lenovo
™ CD-RW/DVD-ROM Combination Drive (Serial ATA). The manual is
divided into the following parts:
Part 1: Installation and user’s guide
This guide contains the product description and installation instructions in the
following languages:
vBrazilian Portuguese
vCzech
vEnglish
vFrench
vGerman
vItalian
vJapanese
vSimplified Chinese
vSlovak
vSpanish
vTraditional Chinese
vTurkish
Part 2: Appendixes
This section contains device-driver, problem-solving, warranty and support
information, and notice information.
Note: The illustrations in this manual might be slightly different from your
hardware.
Registering your option
Thank you for purchasing this Lenovo product. Please take afew moments to
register your product and provide us with information that will help Lenovo to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing better
ways to communicate with you. Register your option on the following Web site:
http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive further
information.
©Lenovo 2006. Portions ©IBM Corp. 2004. xi

xii ThinkCentre and Lenovo CD-RW/DVD-ROM Combination Drive (Serial ATA) User’s Guide

Installation and user’s guide
This section contains the product description, hardware and software installation
instructions, and operating information for the ThinkCentre and Lenovo
CD-RW/DVD-ROM Combination Drive (Serial ATA).
Product description
This product contains aunique multifunction drive that can read and write CD-R
and CD-RW discs, and can also read CD-ROM, DVD-ROM, DVD-RAM,
DVD-R/RW, DVD+R/RW and DVD+R/-R DL discs. This kit also includes aCD
containing an Online User’s Guide, DVD playback software and CD recording
software for Microsoft
® Windows ® 2000 Professional, Microsoft Windows
Millennium Edition (Me), Microsoft Windows XP Home, and Microsoft Windows
XP Professional.
Your option package includes the following:
vOne DVD-ROM/CD-RW Combo SATA Drive 48x/32x/48x/16x
vOne package of (4) M3x5 screws
vOne SATA cable
vOne Laser safety manual
vOne Lenovo safety manual
vOne Quick Reference Guide for CD-RW/DVD-ROM Combination Drive
vOne Super CD for CD-RW/DVD-ROM Combination Drive
Contact your place of purchase if an item is missing or damaged. Be sure to retain
your proof of purchase; it might be required to receive warranty service. See
Appendix E, “Lenovo Statement of Limited Warranty,” on page E-1 for technical
support information.
Your drive can read many DVD and CD formats, including DVD Video, Video CD,
and audio CD formats. It can also write most CD-RW rewritable and CD-R
recordable formats, including high speed CD-R media. You must install the
included DVD playback software to play DVD Videos, and you must install the
included CD recording software to write CD-R and CD-RW discs. The drive also
reads multi-session, extended architecture (CD-XA) discs, and Kodak Photo CD.
This drive delivers data at up to 48 times the standard CD-ROM drive speed (48X)
for CD-ROM and CD-R media. This drive delivers data at up to 16 times the
standard DVD-ROM drive speed (16X) for DVD media. This drive can read most
DVD-RAM, DVD-RW, and DVD-R media types, and is compliant with the
DVD-Multi Player compatibility specification. This drive is designed for installation
in apersonal computer that uses Serial ATA drive architecture.
Software description
The User’s Guide and Software CD contains the following software:
vMultimedia Center for Think Offerings
This software enables you to copy CDs, create audio CDs, create MP3 CDs, and
author data CDs. You can also create bootable CDs and save CD images for later
recording. With the Express Libeller that is included in the Multimedia Center
for Think Offerings, you can print paper labels.
vDirect-to-Disc (DLA)
©Lenovo 2006. Portions ©IBM Corp. 2004. 1-1

This software enables you to write directly to CD media using the drive letter as
you would if you were writing to adiskette. With DLA, you can drag-and-drop
files, create new directories, or save files from almost any application directly to
your Combo drive.
vUDF Reader
This software enables you to read DLA CD-RW media on other computers with
CD drives.
vIntervideo WinDVD
This software enables you to play back DVD videos on your computer or to
play video files from your hard disk drive.
Note: Some graphics adapters such as the FIREGL, Intergroup, and 3dLabs, do
not support DVD video playback.
Installation requirements
Be sure that your computer meets the following system requirements before
installing the drive:
vMinimum microprocessor:
–Intel
® Pentium ® 133 MHz
–Intel Pentium II 233 MHz for DVD playback
v
Minimum RAM: 32 MB
vWindows 2000, Windows Me, Windows XP Home, or Windows XP Professional
operating system
vAn available half high drive bay
vAn available Serial ATA connection
v40 MB available hard drive space
v700 MB available hard drive space for CD copy function
vAudio solution supporting 44.1 or 48 kHz sampling rate
vOptional stereo speakers
v2X AGP video with overlay support for DVD playback
Before you begin
Before you install the CD-RW/DVD-ROM Combination Drive, read the
information in this section on handling precautions and on using the drive controls
and connectors.
Handling precautions
Use the following handling precautions to protect your drive:
vKeep the CD-RW/DVD-ROM Combination Drive in the antistatic bag until you
are ready to install the drive. Limit your movement when installing; movement
can cause static electricity buildup.
vHandle the drive with care. Dropping or jarring the drive can damage the
components inside the drive housing.
vDo not force insertion of the Serial ATA or power cables.
1-2 ThinkCentre and Lenovo CD-RW/DVD-ROM Combination Drive (Serial ATA) User’s Guide

Drive controls and connectors
The following diagrams show the location and functions of the drive controls and
connectors.
Front view of the drive:
1Busy indicator
This light comes on when the drive reads from or writes to adisc.
2Emergency eject hole
This hole provides access to the eject mechanism to remove adisc from the drive.
3Open/Close button
This button opens and closes the disc drawer when you push it.
Rear view of the drive
115pin power connector
27pin signal configuration
Installing the drive
Follow these steps to install the CD-RW/DVD-ROM Combination Drive:
Step 1. Opening the computer
1. Turn off the computer and all attached devices.
2. Unplug all power cords from the computer and all attached devices.
3. Lift the cover from the computer. Refer to your computer documentation for
instructions on how to lift the computer cover.
Step 2. Unpacking the drive
1. Before opening the antistatic bag that the drive is packed in, touch the bag to
an unpainted metal surface for at least two seconds. This drains the static
electricity from the package and your body.
Installation and user’s guide 1-3

2. Remove the drive from the bag.
If you must put the drive down, place the antistatic bag on aflat, padded
surface, such as amagazine, and place the drive on the antistatic bag.
Step 3. Mounting the drive in the bay
Attention: Be sure to use the mounting screws in the option package when you
are driving screws directly into the drive. Using screws that are too long might
damage the drive.
You can mount the CD-RW/DVD-ROM Combination Drive horizontally or
vertically in the computer. If you mount the drive vertically, you must secure any
discs that you place into the drive before the drive tray is closed, or the
CD-RW/DVD-ROM Combination Drive will not be able to read the disc properly.
1. Slide the drive into the bay. Your computer might have specific required
procedures for installing storage devices. For more information on storage
devices, refer to the documentation that comes with your computer.
2. Align the drive-bay screw holes with the threaded holes in the drive housing or
mounting bracket.
3. Thread the screws in loosely to check their position. Two screws are usually
used on each side. Verify that the alignment is correct; then tighten the screws
to secure the drive. Do not over tighten.
Step 4. Attaching the cables to the drive and main board
The following diagram shows where to connect the cables to the drive.
1. Attach a7-pin Serial ATA data cable connector1to the Serial connector on the
drive.
2. Attach a15-pin power cable connector2to the power connector on the drive.
3. Attaching the cables to the main board.
If your computer has more than two Serial ATA connectors, use the second or
third connector to connect the drive.
Please refer to your system documentation for detail hardware installation
operation.
Be sure that the cables will not be pinched or crowded by the computer cover
and that all other cable and power connections are secure.
1-4 ThinkCentre and Lenovo CD-RW/DVD-ROM Combination Drive (Serial ATA) User’s Guide

Step 5. Completing the hardware installation
1. Be sure that the CD-RW/DVD-ROM Combination Drive is securely mounted
and that the connectors are firmly attached.
2. Be sure that the cables do not interfere with the computer cover and that they
do not block the power-supply fan blades or airflow paths.
3. Reinstall the computer cover.
4. Reconnect all external devices.
5. Plug all power cords into the electrical outlets.
Step 6. Updating your computer configuration
After you have completed the hardware installation, restart your computer.
Usually, the configuration-setup information screen is displayed when you turn on
your computer. If you do not see this screen, check your computer documentation
for information about accessing the configuration or setup utility program.
To see the configuration information for most Lenovo computers, press F1 during
startup when the Lenovo graphic is displayed in the upper-right corner of the
screen. When you have finished reviewing the information, save the changes and
exit.
Care and maintenance
This section includes information on taking care of your CD-RW/DVD-ROM
Combination Drive and the CDs and DVDs that you use with the drive.
CD safety information
Carefully handle and clean discs, especially writable media types such as CD-R
and CD-RW discs, so that they remain readable. You can prolong the life of your
discs by using the following precautions:
vAlways store discs in their original packaging
vAlways store discs out of direct sunlight
vAlways store discs away from direct heat sources
vRemove discs from the computer when not in use
vCheck disc for cracks BEFORE each use
vDO NOT force discs into the computer/packaging
vDO NOT bend or flex discs
Caring for aCD or DVD
Digital discs are high-density media that must be handled with care and kept clean
to ensure that they remain readable. The following precautions help to prolong the
life of your discs.
Attention: Wiping adisc using acircular motion can damage the disc and cause
data loss.
vHandle the disc by the edges or the center hole. Do not touch the surface of the
disc.
vTo remove dust or fingerprints, wipe the disc from the center to the edge with a
soft, lint-free cloth.
vDo not write on the surface.
vDo not place the disc in direct sunlight.
vDo not use commercial cleaners to clean the disc.
Installation and user’s guide 1-5

vDo not bend the disc.
Caring for the CD-RW /DVD-ROM Combination Drive
To protect your CD-RW/DVD-ROM Combination Drive during operation, observe
the following precautions:
vDo not move the drive when it is in use. Doing so might cause data error or
might damage the drive or discs.
vAvoid exposing the drive to the following conditions:
–High humidity
–High temperature
–Excessive dust
–Mechanical vibration
–Sudden shock or dropping
–Placement on an inclined surface
–Direct sunlight
–Sudden temperature changes
v
Do not insert foreign objects into the drive.
vDo not stack objects on the drive.
vDo not remove the drive cover or attempt to service the drive.
vRemove any discs from the disc drawer and make sure that the drawer is closed
before moving the drive unit.
vKeep the original packing materials. If you need to ship the drive unit to a
different location, use the original packing materials to ensure that the drive is
transported safely.
Manually ejecting adisc
In case of apower failure, and the drive will not allow the disc to eject, turn off
the computer, and straighten alarge paper clip to form atool. The straightened
end must extend at least 45 mm (1.8 in.). Insert the extended end into the
emergency eject hole on the front of the drive (see “Front view of the drive” on
page 1-3). Push the paper clip until the tray opens. Gently pull out the tray until
you can remove the disc.
45 mm
1.8 in
Installing software
All of the software for the drive is contained on the User’s Guide and Software
CD. The User’s Guide and Software CD contains this User’s Guide, Multimedia
Center for Think Offerings, DLA, and Intervideo WinDVD. DLA is installed when
you install the Multimedia Center for Think Offerings.
Complete the following procedure to install the software:
1. Insert the User’s Guide and Software CD into the drive. If the CD starts
automatically, skip to Step 6.
2. If the CD does not automatically start, click Start, and then click Run.
3. Type e:\launch.bat where eis the drive letter of the CD or DVD drive.
4. Click OK.
5. Select your language.
1-6 ThinkCentre and Lenovo CD-RW/DVD-ROM Combination Drive (Serial ATA) User’s Guide