Lenovo ideapad 330S-14AST User manual

Lenovo ideapad 330S
ideapad 330S-14AST
ideapad 330S-14AST U
ideapad 330S-14AST D
ideapad 330S-15AST
ideapad 330S-15AST U
ideapad 330S-15AST D
User Guide

Read the safety noticesand important tipsin the 
included manualsbefore using your computer.

Notes
• Before using the product, be sure to read Lenovo Safety and General Information
Guide first.
• The latest electronic compliance and environmental information are available
from the Lenovo compliance information Web sites.
- To view compliance information go to: 
http://www.lenovo.com/compliance.
- To download environmental information go to: 
http://www.lenovo.com/ecodeclaration.
• Some instructions in this guide may assume that you are using Windows®10.
If you are using another Windows operating system, some operations may be
slightly different. If you are using other operating systems, some operations
may not apply to you.
• The features described in this guide are common to most models. Some
features may not be available on your computer or your computer may include
features that are not described in this user guide.
• The illustrations used in this manual are for Lenovo ideapad 330S-15AST
unless otherwise stated.
• The illustrations in this manual may differ from the actual product. The
screenshots of operating system are for reference only. Please refer to the actual
product.
Regulatory Notice
• For details, refer to Guides & Manuals at http://support.lenovo.com.
First Edition (January 2018)
© Copyright Lenovo 2018.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.

i
Contents
Chapter 1. Getting to know your computer .........................................1
Top view ..................................................................................................................... 1
Left-side view ............................................................................................................ 7
Right-side view ........................................................................................................ 10
Bottom view ............................................................................................................. 12
Chapter 2. Starting to use Windows 10 .............................................13
Configuring the operating system for the first time .......................................... 13
Operating system interfaces .................................................................................. 13
Putting the computer to sleep or shutting it down ............................................ 16
Connecting to a wireless network ........................................................................ 18
Chapter 3. Recovery system ............................................................... 19
Push-button reset .................................................................................................... 19
Chapter 4. Troubleshooting ................................................................ 21
Frequently asked questions ................................................................................... 21
Troubleshooting ...................................................................................................... 23
Trademarks .......................................................................................... 26

1
Chapter 1. Getting to know your computer
Top view -------------------------------------------------------------------------
Lenovo ideapad 330S-14AST

Chapter 1. Getting to know your computer
2
Lenovo ideapad 330S-15AST
Note: The dashed areas indicate parts that are not visible externally.
Attention:
•Do not open the display panel beyond 170 degrees. When closing the display panel, be
careful not to leave pens or any other objects in between the display panel and the
keyboard. Otherwise, the display panel may be damaged.

aIntegrated
camera
Use the camera for video communication or taking photos.
bBuilt-in
microphone
Capture sound which can be used for video conferencing,
voice narration, or audio recording.
cComputer display The LCD display with LED backlight provides brilliant
visual output.
dWireless LAN
antennas
Connect to a wireless LAN adapter to send and receive
wireless radio signals.
eVentilation slots Dissipate internal heat.
fPower button Press this button to turn on/off the computer.
When the computer is on, press and hold this button for
more than 1 second, the computer will enter sleep mode,
press and hold it for more than 4 seconds, the computer
will be turned off.
gNumeric keypad
(Lenovo ideapad
330S-15AST)
For details, see “Using the keyboard” on page 4.
hFingerprint
reader (on select
models)
Registers fingerprints that can be used as passwords to
secure your computer.
iTouch pad The touch pad functions as a conventional mouse.
Touch pad: To move the pointer on the screen, slide your
fingertip over the pad in the direction in which you want
the pointer to move.
Touch pad buttons: The functions of the left/right side
correspond to those of the left/right mouse button on a
conventional mouse.
Note: You can enable/disable the touch pad by pressing F6 ( ).
Chapter 1. Getting to know your computer
3

Chapter 1. Getting to know your computer
4
Using the keyboard
Numeric keypad (Lenovo ideapad 330S-15AST)
The keyboard has a separate numeric keypad. To enable or disable the
numeric keypad, press the Num Lock key.
Hotkeys
You can access certain system settings quickly by pressing the appropriate
hotkeys.
Lenovo ideapad 330S-14AST

Chapter 1. Getting to know your computer
5
Lenovo ideapad 330S-15AST
Mutes/unmutes the sound. Enables/disables airplane
mode.
Decreases the volume
level. Enables/disables camera.
Increases the volume level. Locks the LCD screen.
Enables/disables
microphone.
Enables the external
projector or dangles the
external display.
Refreshes page. Decreases display
brightness.
Enables/disables the touch
pad.
Increases display
brightness.
Note: If you changed the Hotkey Mode from Enabled to Disabled in the BIOS setup utility,
you will need to press the Fn key in combination with the appropriate hotkey.

Chapter 1. Getting to know your computer
6
Function key combinations
Through the use of the function keys, you can change operational features
instantly. To use this function, press and hold Fn a; then press one of the
function keys b.
Lenovo ideapad 330S-14AST
Lenovo ideapad 330S-15AST
The following describes the features of each function key.
Fn + Space
(on select
models):
Adjusts the keyboard backlight.

Chapter 1. Getting to know your computer
7
Left-side view ---------------------------------------------------------------
aAC power
adapter jack
Connects to the AC power adapter.
bCharging
indicator
AC power
adapter
status
Indicator status Meaning
Disconnected
Off The battery is not charging.
Connected
Solid amber The battery has between 1% and 80%
charge and is still charging.
Solid white The battery has more than 80% charge,
charging will continue until the battery
is fully charged.
cHDMI port Connects to devices with HDMI input such as a TV or a
display.
dUSB 3.0 port Connects to USB devices.
•If the battery charge is more than 20%, the USB port with a ( ) mark supports
charging of an external USB device, even when the computer is turned off.
•For details, see “Connecting USB devices” on page 9.
Notes:

eType-C port Type-C port supports:
• USB 3.1
Note: You may need to install separate device drivers when connecting expansion docks or
port replicators using this connector. Read the device’s documentation before
connecting it to the computer.
fCombo audio
jack
Connects to headsets.
•The combo audio jack does not support conventional microphones.
•The recording function may not be supported if third-party headphones or headsets are
connected, due to different industry standards.
gState LED
Indicator Indicator status Meaning
Power status
indicator
On (solid white) The computer is powered on and the
battery has between 20% and 100%
charge.
On (solid amber) The computer is powered on and the
battery has between 1% and 20% charge.
Slow blinking amber The computer is in sleep mode and the
battery has between 1% and 20% charge.
Slow blinking white The computer is in sleep mode and the
battery has between 20% and 100%
charge.
Off The computer is powered off.
Chapter 1. Getting to know your computer
8
Notes:

Chapter 1. Getting to know your computer
9
Connecting USB devices
You can connect a USB device to your computer by inserting its USB plug
(Type A) into the USB port on your computer.
The first time you plug a USB device into a particular USB port on your
computer, Windows automatically installs a driver for that device. After the
driver has been installed, you can disconnect and reconnect the device
without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs
the driver automatically. However, some devices may require you to install the driver
before connecting. Check the documentation provided by the device’s manufacturer
before connecting the device.
Before disconnecting a USB storage device, make sure your computer has
finished transferring data to that device. Click the Safely Remove Hardware
and Eject Media icon in the Windows notification area to remove the device
before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before
connecting it. Otherwise, the device may not be recognized.

Chapter 1. Getting to know your computer
10
Right-side view ------------------------------------------------------------
aNovo button When the computer is off, press this button to start the
System Recovery or the BIOS setup utility, or to enter the
boot menu.
bMemory card slot Insert memory cards (not supplied) here.
Note: For details, see “Using memory cards (not supplied)” on page 11.
cUSB 3.0 port Connects to USB devices.
Note: For details, see “Connecting USB devices” on page 9.
dKensington Mini
Security slot
For attaching a Kensington MiniSaver™ Mobile (or
compatible) lock.
Attach a security lock (not supplied) here to help protect
your computer from theft and unauthorized use. You can
attach a security lock to your computer to help prevent it
from being removed without your permission. For details
on installing the security lock, please refer to the
instructions shipped with the security lock that you have
purchased.
•Lock is not supplied. When purchasing a lock, choose one that utilizes the Cleat™ locking
mechanism and verify its compatibility with the slot before purchase. A lock utilizing the
T-Bar™ locking mechanism is not compatible with the Kensington Mini Security slot.
•Before purchasing any security product, verify that it is compatible with this type of
security keyhole.
•You are responsible for evaluating, selecting, and implementing the locking devices and
security features. Lenovo offers no comment, judgment, or warranty regarding the
function, quality, or performance of locking devices and security features.
Notes:

Chapter 1. Getting to know your computer
11
Using memory cards (not supplied)
Your computer supports the following types of memory cards:
• Secure Digital (SD) card
• Secure Digital High Capacity (SDHC) card
• SD eXtended Capacity (SDXC) card
• MultiMediaCard (MMC)
•Insert only one card in the slot at a time.
•This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Note: Before removing the memory card, disable it by using the Windows safely remove
hardware and eject media utility to avoid data corruption.
Notes:

Chapter 1. Getting to know your computer
12
Bottom view ------------------------------------------------------------------
aVentilation slots Dissipate internal heat.
Note: Make sure that none of the ventilation slots are blocked, or else overheating of the
computer may occur.
bSpeakers Provide audio output.

13
Chapter 2. Starting to use Windows 10
Configuring the operating system for the 
first time -------------------------------------------------------------------------
You may need to configure the operating system when it is first used. The
configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account
Operating system interfaces -------------------------------------
The Start menu
Windows 10 comes with a powerful and useful start menu. To open the start
menu, do one of the following:
• Select the Start button in the lower-left corner, the Start menu is displayed.
• Press the Windows key on the keyboard.

Chapter 2. Starting to use Windows 10
14
The power button is on the Start menu. By clicking the power button, you
can choose to shut down or restart the computer, or put the computer into
sleep mode.
Through the Start menu, you can locate all the installed apps or view the
frequently used apps.
The ACTION CENTER
Select the ACTION CENTER icon on the taskbar and the ACTION
CENTER is displayed.
From the ACTION CENTER, you can examine important notifications from
Windows and your apps. Moreover, you can change common settings
quickly.

Chapter 2. Starting to use Windows 10
15
Task View in taskbar
In Windows 10, you can add a new desktop and switch between different
desktops.
To add a new desktop, do the following:
• Click the Task View icon in the taskbar area.
• Click New desktop.
To switch between desktops, click the Task View icon , then select your
desired desktop.

Chapter 2. Starting to use Windows 10
16
Putting the computer to sleep or shutting 
it down ----------------------------------------------------------------------------
When you have finished working with your computer, you can put it to sleep
or shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the
computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use,
bypassing the startup process.
To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the power button.
• Move the cursor to the lower-left corner, and then select the Start button.
Select Power Sleep.
Note: Put your computer to sleep before you move it. Moving your computer while the hard
disk drive is spinning can damage the hard disk, causing loss of data.
To wake up the computer, perform the following:
• Press any key on the keyboard.
• Press the power button.