Lenovo IdeaTab S2110A User manual

IdeaTab S2110A
User Guide V1.0
Please read the
safety precautions and important notes
in the supplied manual before use.

Chapter 01
IdeaTab S2110A Overview *Specific models only
1-1 Dock Description (on select models)
1-2 IdeaTab Appearance
1-3 Buttons
1-4 Turning On/Off Your IdeaTab
1-5 Activating/Deactivating the Display
1-6 Screen Lock/Unlock
1-7 Navigation Tips
1-8 Home Screen
1-9 Switching Home Screens
1-10 Status Bar
1-11 Recent Apps
1-12 Applications Management
1-13 Entering Text
1-1 Dock Description (on select models)
The dock is purchased separately.

Charging the dock
When using the dock for the first time and whenever battery power has been fully depleted, fully
charge the battery for about 8 hours. Use only the power adapter that comes with your IdeaTab, as
using a third-party power adapter may damage your dock.
Connecting to the dock
Step 1: Open the dock holder to about a 90º angle, as shown below.

Step 2: Align the IdeaTab with two positioning docks and dock connector, as shown below.
NOTE: Inserting into the dock improperly may cause stripping of the dock surface paint, or other
damage.
Step 3: Firmly insert the IdeaTab into the positioning docks, as shown below, until the release
button clicks in place.

NOTE: When connected to the dock successfully, Docking Connected is displayed in the bottom
right corner of the screen.
When connected to the dock, the virtual keyboard on the touch screen is disabled, and only the
dock keyboard can be used.
Step 4: Make sure the IdeaTab is properly seated.
Removing from the dock
Step 1: Press the release button to remove the IdeaTab, as shown .

Step 2: Gently remove the IdeaTab from the dock holder .
Using the keyboard

Return to the previous screen Open the Google Search interface
Toggle Wi-Fi ON/OFF Toggle 3G function ON/OFF
Toggle Bluetooth ON/OFF Enable/disable the touchpad
Lock the IdeaTab Open the web browser interface
Display Advance menu Mute/Unmute
Decrease sound volume Increase sound volume
Skip to the previous track Start/Pause playback
Skip to the next track Open the applications list
Switch between current screen and
Home screen Display recently used apps
Function key combinations
The dock has function keys incorporated in its standard keyboard.
By pressing the appropriate function keys, you can change system settings instantly. To use this
function, press and hold Fn , then press one of the function keys .
The following are the features of each function key.
Fn + : Return to the previous page Fn + : Go to the next page
Fn + : Decrease display brightness Fn + :Increase display brightness

Fn + : Toggle letters and numbers Fn +:Display symbols and special
characters keyboard
1-2 IdeaTab Appearance
Images are for reference purposes only, and may differ from your IdeaTab S2110A.
1-3 Buttons
Power Button
To turn on your IdeaTab, press and hold this button for about 4 seconds, then release it.
If your IdeaTab is turned on, press this button to deactivate the display. If the display is
deactivated, press this button to activate the display.
To turn off your IdeaTab, press and hold this button for about 1 second, then select OK in the
Power off pop-up window to shut down your IdeaTab.
Should it be necessary, press and hold this button for about 6 seconds to force shutdown.
Volume Controls
Press the Volume Up or Down button to adjust the volume.
*SIM card slot (3G only)
The SIM card slot is located on the lower left side of the IdeaTab. To insert a SIM card while
turned off, pull up the SIM card slot cover with a fingertip, then insert the SIM card. To
remove the SIM card while turned off, push the card into the slot lightly until it pops out.
For the 3G-enabled version, DO NOT insert or remove the SIM card while your IdeaTab is
turned on. Doing so may permanently damage your SIM card or IdeaTab.
For the Wi-Fi version only, this is not valid.
1-4 Turning On/Off Your IdeaTab
Turning On Your IdeaTab
Press and hold the Power button on your IdeaTab for about 4 seconds, then release it. The Lenovo
logo and the startup screen will appear in sequence, indicating your IdeaTab has been turned on.
Turning Off Your IdeaTab
Press and hold the Power button on your IdeaTab for about 1 second. The Power off pop-up

window will appear. Tap OK to turn off your IdeaTab.
NOTE: When connecting to a computer with a USB cable, make sure that the battery power is
sufficient for normal operation; otherwise, charge with the AC power adapter before USB
connection.
1-5 Activating/Deactivating the Display
Activating the Display
With the display deactivated, press the Power button on the IdeaTab to activate the display. The
IdeaTab's display will then illuminate, indicating that it has been activated.
Deactivating the Display
If you do not need to use your IdeaTab temporarily, you can press the Power button to deactivate
the display. Your IdeaTab will then enter standby mode to save power.
1-6 Screen Lock/Unlock
Screen Lock
Auto-Lock
You can set screen timeout by tapping Sleep in Display under Settings. If there is no
operation within the preset standby time, the display will automatically deactivate, and your
IdeaTab will be locked automatically.

Manual Lock
If you do not need to use your IdeaTab temporarily, you can press the Power button for about 1
second to deactivate the display. Your IdeaTab will then be locked, and will enter standby mode.
Screen Unlock
When in standby mode, press the Power button on your IdeaTab to activate the display. Then, tap
and hold the lock icon, and drag the slider over the unlock icon, as shown in the illustration below.