Lenoxx PDVD830 User manual

AVI Playback

Master screen and slave screen.

SOURCE: PRESS TO CHANGE BETWEEN DVD, USB OR
MEMORY CARD PLAYBACK.
SETUP: PRESS TO ENTER THE SETUP MENUS ON THE
MONITOR.
OK: PRESS TO CONFIRM A SELECTION IN THE SETUP MENUS.
DURING PLAYBACK, PRESS OK TO PAUSE PLAYBACK. PRESS OK
AGAIN TO RESUME PLAYBACK.
AGAIN TO RESUME PLAYBACK.
ARROW DIRECTIONAL BUTTONS: USED TO SCROLL THROUGH
SETUP MENUS.
DURING PLAYBACK, PRESS THE LEFT ARROW BUTTON FOR
FAST REWIND. PRESS THE RIGHT ARROW BUTTON FOR
FAST FORWARD.
VOL -: PRESS TO DECREASE VOLUME.
VOL+: PRESS TO INCREASE VOLUME.
VOL+: PRESS TO INCREASE VOLUME.

Requires 2 x AAA batteries (not included)
Remove the battery cover from the rear of the
remote control.
Add the batteries to the battery compartment as per
the correct polarity.
Put the battery cover back onto the remote.

Note: USB, SD/MMC card supports up to 32GB, and video files supported are
up to resolution 720*576.

Some video and JPEG disc do not support this function.

MP3/WMA/AVI Playing

AVI format

The preference page allows you to adjust the default DVD disc settings (This setting is only
available then here is no disc inside the unit).
- TV Type: Set TV type to PAL, AUTO or NTSC
VIDEO SET UP PAGE
PREFERENCE SETTINGS
The QUALITY menu allows you to change the video quality settings on the portable DVD player.
- Sharpness: Adjust the screen sharpness between LOW/MED/HIGH
- Brightness: Adjust the screen brightness
- Contrast: Adjust the screen contrast
- Gamma: Adjust the gamma
- Hue: Adjust the hue
- Saturation: Adjust the Saturation- Saturation: Adjust the Saturation
The PANEL QUALITY men allows you to change the display properties on the portable DVD player.
- Sharpness: Adjust the screen sharpness between LOW/MED/HIGH
- Brightness: Adjust the screen brightness
- Contrast: Adjust the screen contrast
- Hue: Adjust the hue
- Saturation: Adjust the Saturation
The PANEL DISPLAY allows you to change the aspect radio.The PANEL DISPLAY allows you to change the aspect radio.