Lenoxx PR4219 User manual

Model no: PDVD1000
Batch no: PR4219
PLEASE READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Features:
•Lightweight, Compact & Portable
•Hi-Res HD Widescreen Display
•Top-Loading CD/DVD Tray
•Built-in Rechargeable Battery
•Dual Full Range Stereo Speakers
•USB Flash & SD Memory Card Readers
•Versatile Digital Media File Compatibility
•Audio, Image & Video File Support
•Swivel Angle Adjustable Display Screen
•Top Panel Button Controls
•Speaker: 3W (2 X 1.5W)
•Headphone Jack, 3.5mm
•Copy MP3 files from a CD to USB stick
•Display Type: 10.1’’ -inch LCD (16:9)
•Monitor Rotation: 270 Degree Left/Right
•Battery: 2500mAh, Li-thium battery 7.4V
•Battery playback time after full charge: 3 –3.5 hours
•Battery re-charge time: 5 –6 Hours
•Resolution size pixels: 1024 x 600
•Frequency Response: 20-20kHz
•Dynamic Range: >85dB
•T.H.D.: <1.0%
•CD/DVD Compatibility Type: VCD, CD-RW, DVD-R
•Digital Media File Support: AVI, MP3, WMA, JPG, VCD, EVD, VOB
•Maximum USB/SD Flash Memory Support: Up to 32GB
•Power: 100/240V 1A (12V DC Power Adapter)

IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS:
Warning:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE TO MOISTURE. DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. SERVICE MUST BE CARRIED OUT BY QUALIFIED PERSONNEL ONLY, OR THE WARRANTY
IS NOT VALID.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of non-insulated dangerous voltage within the product. This may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert user to the presence
of important operating procedures and maintenance (service) instructions in the literature
accompanying the appliance.
Laser product symbol: located on the rear panel of the unit (in some cases at the bottom side),
indicates that this player is a class 1 laser product, it uses only weak laser and no hazardous radiation
outside of the unit.
Installation:
Ensure that the portable DVD player is installed in accordance with the instructions and illustrations
provided in this manual.
General Precautions:
1) Read through this instruction manual before installation and use.
2) Do not touch the power plug with wet hand.
3) Switch off the main power when the unit is not in use. (Disconnect the power plug from the

power outlet when you do not intend to use the unit for a longer period of time.)
4) Do not open the cover or touch any of the components inside the unit, only for qualified
technicians.
5) Do not expose the unit to direct sunlight or nearby objects that radiate heat to avoid damage to
the unit.
6) Do not place the unit in moist and humid environments.
7) Please ensure the ventilation holes are not covered to avoid overheating and malfunction.
8) Clean the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol or
sprays.
9) The apparatus shall not be exposed to dripping or splashing, nor should any objects filled with
liquids, such as vases, be placed on the apparatus.
Clean the Machine:
1) Please ensure the machine is power off before cleaning.
2) Do not use any chemicals or cleaning agents to clean the machine.
3) Use slightly damp cloth to clean the outside of the machine.
Do not open the portable DVD player:
To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable
parts inside the portable DVD player. Refer servicing to qualified service personnel.
Care of Disc:
1) Do not place disks near heat sources such as direct sunlight or high humidity areas.
2) Stack disks on top of each other, in the same way.
3) Do not touch the disk surface, hold the disc by the edges.
4) Do not use adhesive tape on the disk surface.
5) Wipe the disk from inside to outside with a soft cloth.
6) Do not use gasoline, non-disc special or antistatic cleaning agents to clean the disc because
these substances will cause damage.
WHATS IN THE BOX:
1 x Main DVD player with 10.1” LCD screen
1 x Remote control (batteries not included,
requires 2 x AAA batteries)
1 x 12V DC car charger
1 x 240V AC power adapter
1 x AV lead
1 x Instruction manual
1x Warranty card
1x Customer card

Please check the contents of the packaging carefully.
INSTALLATION:
Indoor Use
1. Locate a spare mains outlet and turn it OFF.
2. Plug the supplied AC adaptor into the outlet.
3. Connect the other end to the SC9-12V/2A DC power input socket on the side of the DVD player.
4. Turn the main outlet ON.
5. Turn the main Power Switch on the Player to the ON position.
In-car Use
1. With the vehicle ignition off, connect the supplied car charger to the vehicle power outlet.
2. Connect the other end to the SC9-12V/2A DC power input on the side of the DVD player.
3. Turn the vehicle ignition to ON or ACC to power the outlet and slide the DVD player power
switch to the ON position.
Note: Care should be taken with all cable and connections with the DVD player.
Please ensure that there is no tension on any connection as this may damage the units.
Tidy any excess cabling to trip hazards that may damage the player.
PLAYBACK:
Panel:

BUTTON
FUNCTION
MODE
Press to change between playback modes.
VOL -
Press to decrease volume.
VOL +
Press to increase volume.
SETUP/ LCD POWER
Short press once to access the setup pop-up menu.
Long press and hold to turn the screen display on or off.
R/L
Press to change between different sound settings.
MENU
Press to access a DVD discs menu on discs which allow this
Function.
І◄◄
Press to go back a chapter when playing a DVD disc which allows
for this function.
►►
Press to fast forward in DVD playback. Press to go forward a song
in CD playback.
►►І
Press to go forward a chapter when playing a DVD disc which
allows for this function.
◄◄
Press to rewind in DVD playback. Press to go back a song in CD
playback.
OK
Play/pause button. Press to pause playback. Press again to resume playback.
USB/CARD
When in disc playback, press to change from disc play mode to
USB/SD mode.
COPY
For use with the copy from CD disc to flash stick function.
STOP
Press to stop playback.
OPEN
Switch to open lid for DVD player.

Side Panel:
ITEM
FUNCTION
USB
USB port
CARD
SD/MMC Card socket
Ω EARPHONE
Connect earphones to this jack, earphones not
included
AV OUT
Video out signal
AV IN
External video input signal
OFF/ON
OFF/ON switch to turn the player off and on
12V DC power in
socket
Socket for connection to mains adaptor or car adaptor

Remote Control:
BUTTON
FUNCTION
POWER
Press to put the unit in standby mode, press again to take if oīstandby
mode
CARD/USB
Press to change the playback method from memory card or USB
ZOOM
When playing a DVD disc, press repeatedly to zoom in or zoom out
MUTE
Press to mute sound un-mute sound
PROG
N/A for this model
COPY
For use with the funcƟon, copy MP3Įles from a CD disc to USB sƟĐŬ
OSD
Press to display disc info when playing a DVD/CD disc
REPEAT
Press to repeat current playing music track
SETUP
Press to enter set up menu’s for the DVD player
MODE
Press to change playback mode
Ż
ŻDirecƟonal buƩon – leŌ. For use in menus
Ÿ
ŸDirecƟonal buƩon – up. For use in menus
Ź
ŹDirecƟonal buƩon – right. For use in menus
ź
źDirecƟonal buƩon – down. For use on menus
ENTER
ConĮrmaƟon buƩon for use when using the set up menus
CARD/USB
ON/OFF

BaƩĞriĞs in tŚĞ rĞmotĞcontrol
1.Remove the baƩery cover from the rear of the remote control.
2.Add 2 x AAA baƩeries (not included) to the remote as per the polarity direcƟons in the baƩery
compartment in the remote control.
3. Put theďĂƩery cover back onto the rear of the remote control.
NoƚĞ
1. Do not use re-chargeable bĂƩeries in the remote control, because they lose power at
a slower rate.
2. Do not mix diīĞƌĞŶt brands and type of baƩeries, do not use old and new baƩeries
together.
3. When the remote control funĐƟon is not strong or control range is small, replace the
baƩeries.
4. If the remote control will not be used for a long Ɵme, remove the baƩeries to avoid
damage to the remote control from baƩery leakage or corrosion.
5. Do not use the remote control ion hot or humid condŝƟons.
6. Do not disassemble the remote control.
MENU
Press to access the menu for DVD discs which allow for menu selecƟon
ŶSTOP
Press to stop playback
VOL -
Press to decrease volume
ŹŒ PLAY/PAUSE
Press to pause playback. Press to resume playback
VOL +
Press to increase volume
ŻŻ
Press to rewind in DVD playback. Press to go back a song in CD
playback.
ŹŹ
Press to fast forward in DVD playback. Press to go forward a song
in CD playback.
ʳŻŻ
Press to go back a chapter when playing a DVD disc which allows
for this funĐƟon
ŹŹʳ
Press to go forward a chapter when playing a DVD disc which
allows for this funcƟon
LCD ON/OFF Press to access the LCD screen ON/OFF
SUBTITLE
Press to access subƟƚůĞƐ on discs which allow for this funĐƟon
AUDIO
Press to switch between leŌ/right/stereo sound playback
GOTO
Press to jump to a parƟcular secƟon when playing a DVD disc that
allows for this funcƟon
RETURN
Exits current operaƟon, e.g.: menu
NUMBER KEYS
Press during CD disc playback to jump to aƉĂƌƟĐular track

Basic FuncƟon OperaƟon:
1. OperaƟon
Connect either the 240V mains power adaptor (indoor use) or the 12V car adaptor (in car
use) to the DC input socket on the DVD player.
Switch the ON buƩon on the machine to turn on the DVD player.
Turn the switch to OFF when not in use.
2. Place disc
1) Press OPEN to open the disc cover.
2) Hold the edge of the disc insert the disc.
3) Close the disc cover.
3. Play /Pause
1) This player will automaƟcally play once the disc is loaded.
2) Press ŹŒto pause
3) Press ŹŒonce more to resume play.
4. Play back from USB/SD/MMC memory card
Press the SD/USB buƩon to play back from USB or memory card.
5. TFT picture adjustment
WƌĞƐƐ^dhWŽŶƚŚĞƉĂŶĞůŽĨƚŚĞsƉĂŶĞůŽƌ^dhWďƵƩŽŶŝŶƚŚĞƌĞŵŽƚĞĐŽŶƚƌŽůƚŽĂĐĐĞƐƐ
the LCD setup menu for adjustment.
hƐĞƚŚĞĚŝƌĞĐƟŽŶĂůĂƌƌŽǁďƵƩŽŶƐŽŶƚŚĞƌĞŵŽƚĞĐŽŶƚƌŽůƚŽƐĞůĞĐƚƚŚĞĚĞƐŝƌĞĚƐƵďŵĞŶƵĨƵŶĐƟŽŶĂŶĚ
ƵƐĞƚŚĞůĞŌŽƌƌŝŐŚƚĂƌƌŽǁƐƚŽĂĚũƵƐƚƚŚĞĨƵŶĐƟŽŶ
1) Sharpness
2) Brightness
3) Contrast
ϰͿ ^ĂƚƵƌĂƟŽŶ
5) Hue
ϲͿ ƐƉĞĐƚƌĂƟŽ
6. Character display
Press OSD to show disc informĂƟon and operaƟon funĐƟon and press OSD once again
to turn oīthe display.
7. DVD disc menu play
Some DVD discs are recorded with Ɵƚůe menu or chapter menu.
When MENU buƩon on the remote controller is pressed, the screen will display the menu
at your choice. Press direcƟon buƩons to adjust and press ENTER to conĮrm and press
number buƩons to select. Press MENU buƩon again to return root menu. Press TITLE
buƩon once again to return ƟƚůĞ menu.
8. Select chapter play direct by number buƩon
Press number buƩons to directly select the chapter to play once the player Įnished the
disc reading.
1) Press number buƩons 1-9 for the chapters with the number less than 10.
2) For the chapters with the number above 10, press 10+ buƩon (it switches to 20+,
30+…when pressed in succession) , before pressing number buƩon 0-9

9. DVD Menu Setup
1) System Setup Page
a. Screen Display: NTSC & PAL & AUTO
b. Last Memory State: When the DVD player is powered off, the system can resume
playback from its last position when the DVD player is turned on again. The options are ON or OFF.
c. Screen Saver: The options are ON or OFF.
d. Display Type: The options are:
4:3 PS: When a wider screen video is played, the left and right edges of the video will be cut off.
4:3 LB: When a wider screen video is played, the top and bottom of the screen will have black strips.
16:9: Suitable for a wide screen display
Note: the play effect is related to the ratio of the video recorded. Therefore, some videos may not
be played in the screen size you have chosen.
e. Password: works with classification disc.
The default password for this model is 0000.
Initially, this option is set as ‘password lock.
To revise the password, the old password must be entered and then a new password can be added
by using the numerical keys. The new password must be 4 digits in length.
f. Rating (Age limit). For use with a disc which allows for this function. You can choose an age control
level. The options you can choose from are:
1) Kid Safe
2) G
3) Pg
4) Pg 13
5) Pg-R
6) R
7) NC 17
8) Adult
This function is only suitable for a disc with the level limit system. This function will only work when
the password function has been released.
g. Default Value: Factory Reset. When this is chosen
2) Language Setup
a. OSD Language: English, Chinese, French, German, Spanish, Italian, Portuguese, Russian,
b. Audio Language: English, Chinese, French, German, Spanish, Italian, Portuguese, Russian,
c. Subtitle Language: English, Chinese, French, German, Spanish, Italian, Portuguese, Russian,
d. Menu Language: English, Chinese, French, German, Spanish, Italian, Portuguese, Russian,
note: If a language you have chosen is un-available in the DVD, then this device will automatically
choose the defaulted language of the disc.
3) Audio Setup
Press the up and down arrow buttons to move the slider to adjust the audio:
+4,+2,0,-2,-4,b
4) Video Setup
Press the up and down arrow buttons to adjust setup of:
Ă ƐŚĂƌƉŶĞƐƐ
ď ďƌŝŐŚƚŶĞƐƐ
Đ ĐŽŶƚƌĂƐƚ
Ě saturation
Ğ ŚƵĞ
Ĩ ĂƐƉĞĐƚƌĂƚŝŽ

5) Digital Setup:
Press the arrow buttons to adjust setup of:
a. OP mode: Line Out & RF
b. Dynamic Range: Full 6/8, 4/8, 2/8, off
c. Dual mono: Stereo Mono L, Mono R, Mix Mon
Disc Play:
1. Audio Track Selection
1) You may select the required language when playing DVD or super VCD discs with
multi languages
During the play of DVD and super VCD, press AUDIO to choose the language (depends
on the discs)
2) You may select mono L, mono R or stereo for the CD or VCD with multi audio tracks.
2. Fast play
During the play of discs, you can use fast forward or rewind to search specific target.
Press ◄◄ enter into fast rewind status. Every press of ◄◄ will adjust the rewind speed.
FRX2 → FRX4 → FRX8 → FRX16 → FRX32 → Play Press ►║ for normal play
2) Press ►► enter into fast forward status. Every press of ►►will adjust the forward
speed.
FF X2→ FFX4 → FFX8 → FFX16 → FFX32 → Play Press ►║ for normal play
3. Slow Play
You can use slow motion video according to the following steps.
1) Press SLOW to enter into slow play mode. Every press of this key will adjust the slow
speed
SFX2 → SFX4 → SFX8 →SFX16 → Play Press►║ for normal display
4. Repeat Play
You can select title repeat and chapter repeat during the play of DVD discs.
1) Chapter repeat:
Press REPEAT till the screen displays “REPEAT CHAPTER”
2) Title Repeat:
Press REPEAT till the screen displays REPEAT TITLE
3) Cancel Repeat:
Press REPEAT till the screen displays REPEAT OFF
You can select single repeat and disc repeat during the play a CD disc.
1) Repeat One
Press REPEAT till the screen displays “REPEAT ONE “,
2) Disc Repeat
Press REAPEAT till the screen displays “DISC REPEAT”
3) Cancel Repeat
Press REPEAT TILL the screen display disappears
5. Certain Portion Repeat
During the playback of a disc, you may press “A-B” button to enjoy your prefer portion
repeatedly.
1) Press “A-B” at the beginning point of the contents to be repeated and the screen will
display “Repeat A-“ to set the start point A.

2) Press “A-B” at the end point of the contents to be repeated and the screen will display
“Repeat A-B“ to set the end point B
3) Press “A-B” once again and the on screen display will disappear, then the repeat play
will be cancelled.
6. Subtitle Selection
You may select one subtitle to be display for the DVD disc playback with multi language
1) Press SUBTITLE to select one subtitle display
2) Cancel subtitle display: press SUBTITLE till the screen displays OFF
Note: Subtitle function depends on the discs. If the subtitle on the discs is non-selectable,
then it is void to press SUBTITLE
7. Chapter search, Time search
Press GOTO during disc play and press direction keys to select among the following
options:
1) Title: To display current title. You can input the title number to be played.
2) Chapter: To display current playing chapter. You can input the chapter number to be
played.
3) Time: To display the current playing time. You can input the time to be played
After choosing, press ENTER and exit the menu.
8. Zoom Function (Only effective for DVD, SVCD, VCD)
To zoom in or zoom out the certain motion pictures or still image
1) During disc play, press ZOOM to zoom into 2x.
2) Press ZOOM in turn to zoom into 3x. 4x and zoom out 1/2x. 1/3x and 1/4x.
3) When resuming to the original image, press ZOOM until the zoom disappears.
9. MP3 Disc Play
1) Place the disc into the DVD player. The screen will display the disc menu and the
machine automatically play.
2) Directory selection; Press ◄to move the cursor to the directory area (the left side of
the screen) . Press ▲or ▼to select one folder and press ENTER to confirm
3) Chapter Selection: Press◄to move the cursor to chapter area (the right side of the
screen) . Press ▲or ▼to select one folder and press ENTER to play
4) Choose the chapter with remote control: If the song quantity is under 10, you can choose
directly with the numerical buttons on the remote control.
CD copying to USB flash stick:
When playing a CD/MP3 disc, insert a USB flash stick to the USB port on the DVD player, press the
COPY button.
Press the up/down buttons on the remote control to move the cursor to TRACKS.
Press the right arrow button on the remote control to move the cursor to the TRK TITLE menu.
Press the enter button on the remote control to choose all tracks.

Press the up/down buttons on the remote control to move the cursor to the track to be reproduced
and press the enter button to confirm.
Press the enter button on the remote control to choose the desired music track, press the arrow
buttons on the remote control to move the cursor to the START option and then press the enter
button to start copying.
During the copying process, do not remove the USB stick from the DVD player or power the DVD
player off.
When the music file to be copied has played in full, the copying process will be complete at the same
time. When the copying process has been completed, use the arrow buttons on the remote control
to move the cursor to the QUIT option. Press the ENTER button on the remote control to exit and
then remote the USB stick from the DVD player.

AV OUT (Signal to TV):
To connect the DVD player with a TV set, ensure the channel selected to view on the TV
screen is the correct AV channel relating to the AV ports that the DVD player has been
connected to.
Troubleshooting:
Fault
Solution
No power/no charging
Check that the adaptor is connected
Check that the DVD player is ON
No disc
Check that disc has been placed in the DVD player correctly
If the disc is damaged or dirty change to a different disc
Ensure the disc is of a compatible format to be played in the
DVD player
No pictures
When connected to a TV set using the AV ports, check the
TV is turned on
Check that the DVD player is turned on
Can not choose song
Remote is damaged
Check batteries are inside the remote
Ensure the batteries are not flat
No Audio
Check that the volume is not on silent
Check that the sound is not on mute
There is no sound when in Pause, fast forward, fast rewind
modes.

DVD Specification:
Compatible disc
DVD, SVCD, VCD, CD, CD-R/RW, JPEG, DVD-R/RW,
WMA, AVI, MP3.
Supporting out device
USB/MMC/SD
Anti-shock function
DVD; 3 seconds; VCD/CD; 10seconds; MP3; 90seconds
Audio out
AUDIO; 2. 0V+-0. 2, Speak: 8Ω/1. 5W;
Output of earphone: 15mW
Frequency
20HZ—20KHZ
Audio (S/N) Radio
≥50dB
Range of activity
≥50dB
Video output
1. 0V±0. 2Vp-p(75Ω)
Video output
PAL/NTSC/AUTO