Leopard LI-HDSDI-1080-D User manual

Thank you for purchasing Leopard HD-SDI Camera. Please read the
instruction carefully for a thorough understanding of how the camera operates.
1.Operating requirements
1.1 Before using the camera, please read this manual carefully and keep it in
safe place for later use.
1.2 Installation should be proceeded by professional service. Follow the in-
structions and do not dismantle without authorization.
1.3 In order to protect the sensor, do not expose the lens to intense light
source for long time.
1.4 Do not touch the lens directly. Please cover the dustproof wrap when the
camera is not being used.
1.5 Please use a dry soft cloth to clean the camera. If it is hard to clean, use
detergent with water, wipe and dry the camera.
1.6 Do not install the camera under air conditioning’s air exit, otherwise lens
is easy to blur with condensation of moisture.
1.7 Please ensure that all electric power sources are turned off when perform
installation, cleaning, etc.
1.8 Please transport, use and store the camera in allowable temperature and
humidity.
1.9 If the camera is broken, for example power cord or plug damaged, splash
liquid or foreign matter falls into camera, raining, wet, etc. Please contact
manufacturer or maintenance center (Do not modify and maintenance
without permission)
2.Statement
2.1 All photos here are for reference only. Specifications are subject to physi-
cal product.
2.2 This manual is subject to change without further notice.
2.3 Please contact with customer service for the newest procedures and sup-
plementary specification.
2.4 This manual list several model numbers for reference , please according
to the actual product.
2.5 We will do the best to keep this manual complete and accurate, but some
data may has deviation. If any doubt or dispute ,company retain the final
right of the product.
LEOPARD HD-SDI CAMERA
USER MANUAL
INTRODUCTION:
This camera which uses the latest 2.1M Pixel progressive scan CMOS sensor is
specially designed for security monitoring. It is a quality new-designed HD camera
which applies DC12V and supports users to customize the output parameter
settings.
Feature
■ ACCE ( Adaptive Color & Contrast Enhancement)
■ NTSC/PAL Selectable
Specification
Imaging Sensor 1/3" 2.1Megapixel CMOS
Scanning System Progressive Scan
S/N Ratio More than 50dB (AGC Off)
Video Output Mode 1080P(1920 X 1080)
Video Output Level HD-SDI /1.0 Vp-p (75Ω，Composite)
Lens 2.8-12mm Manual Zoom Lens (3M Pixels)
Min. Illumination 1.0Lux(Color),0.5Lux(BW)
OSD Built-in
Electronic Shutter Auto/FLK/1/25,30sec ~ 1/50000sec
AGC Low/Middle/High
2D/3D-NR 2DNR/3DNR/SMART NR
Digital Zoom/PIP On/Off(x2 ~ x64)
D-DFFECT Freeze/Mirror/D-Zoom/NEG.IMAGE
Voltage/Current DC12V+10% / 210mA(600mA with IR on)
Operating tempera-
ture -10°~ +50°C
Dimension (mm) ￠142 x 100(H) mm
Weight (g) 1000
Safety Instruction
Application method
1 2
3 4
NO. Name Model Number
1 Camera LI-HDSDI-1080-D 1
2 Power line — 1
3 Warranty
Card — 1
Packing List
Wire ports

LENS ■DC ■VIDEO
EXPOSURE ■SHUTTER
■ACCE
■AGC
■DEFOG
■SENS-UP
■BACKLIGHT
■BRIGHTNESS
WHITE BAL ■ATW
■INDOOR
■AWC→SET
■OUTDOOR
■MANUAL
DAY&NIGHT ■COLOR ■AUTO ■EXT ■B/W
NR ■2DNR ■3DNR ■SMART NR
SPECIAL ■CAM TITLE
■LANGUAGE
■D-EFFECT
■DEFECT
■MOTION
■RS485
■PRIVACY
ADJUST ■SHARPNESS
■NTSC/PAL
■MONITOR ■OSD ■LSC
RESET ■FACTORY
EXIT
OSD MENU
Function Menu
How to use the camera
LENS
1.When the SETUP menu screen is displayed, select LENS by
using the UP and Down buttons so that the arrow indicates
LENS
►DC/VIDEO/MANUAL: Select Auto Iris Lens.
EXPOSURE
1.Using this function, you can control screen brightness.
►SHUTTER: MANUAL/AUTO.
* MANUAL
NTSC: 1/30 ~ 1/50000, X2 ~ X30.
PAL: 1/25 ~ 1/50000, X2 ~ X30.
* FLK: Select this when you picture flicker.
* AUTO: Select this mode to control the shutter speed
automatically. Shutter speed is automatically controlled
depending on the brightness of the screen.
►AGC: You can adjust it at LOW,MIDDLE and HIGH level.
The higher gain level means the brighter screen but the higher
noise.
►SENSE-UP: When it is at night, the camera automatically
detects the light level and maintains a clear picture.
►BRIGHTNESS: You can control the brightness .
►ACCE: If there are bright area and dark area on the screen at
the same time, this function makes both areas to be clear.
- OFF, LOW, MIDDLE, HIGH 4step.
►DEFOG: Carry out defog function.
- OFF,LOW,MIDDLE,HIGH 4step.
►BACKLIGHT: This function allows you to get a clear pic-
tures of objects even the objects in strong backlight.
* BLC : GAIN: LOW,MIDDLE,HIGH
AREA: Area set (size & position).
* HSBLC: To inhibit strong light and compensate bright-
ness of the area around it.
*SELECT: AREA 1~AREA 4 *DISPLAY: select area ON/OFF
*LEVEL: Masking level set *MODE: ALL DAY and NIGHT
*BLACK MASK: Mask ON/OFF
WHITE BAL.
►ATW: Select this when the color temperature is between
2400°K and 11,000°K.
►AWC→SET: To find the optimal setting for the current lumi-
nance environment in this mode, set the camera towards a sheet of
white paper and press the SET button. If the environment changes,
readjust it.
►OUTDOOR: Select this when color temperature is around
5,100°K.
►INDOOR: Select this when the color temperature is
around 3,100°K.
►MANUAL: Select this to fine-tune White Balance manually.
DAY & NIGHT
You can display pictures in Color or Black and White.
►AUTO: Switched Color and B/W automatically.
- DELAY: You can select the duration time about changing the
day/night mode.
►COLOR: The picture is always displayed in color.
►B/W: The picture is always displayed in B/W.
NR
This function reduces the background noise in a low luminance
environment.
*2DNR(noise reduction) *3DNR
* SMART NR (3DNR+ motion detection)
SPECIAL
Select a desired mode using the UP and DOWN buttons.
►CAM TITLE: If you enter a title, the title will be appear on
the monitor.
►D-EFFECT
* FREEZE: You can stop the image or reactive it.
* MIRROR
- MIRROR: you can flip the image horizontally.
- V-FLIP: you can flip the image vertically.
- ROTATE: you can rotate the image on the screen.
* D-ZOOM
- PIP: PIP display ON/OFF - D-ZOOM: X2.0~X64
- PAN&TILT: Set to change PIP position.
* NEG.IMAGE: ON/OFF
►MOTION
* SELECT: Select AREA1~AREA3.
* DISPLAY: Select AREA ON/OFF.
* SENSITIVITY: When the number is high, the detection is in-
creased to recognize even small movement.
* MOTION VIEW: ON/OFF.
►PRIVACY: Hide an area you want to hide on the screen.
* SELECT: AREA1~8 * DISPLAY: Select AREA ON/OFF
* COLOR: 1~16 color step * DEFAULT: Factory Reset
►LANGUAGE: ENGLISH/CHINESE.
►DEFECT: CMOS correction to compensate for defects that
can be occur at the low light conditions.
*LIVE DPC: Auto defect. *LEVEL: Level of Auto defect.
*STATIC DPC: Manual defect. *LEVEL: Manual defect value.
*START: Start defect.(Close the lens to shield the light, Select
the START ).
*SENS-UP: Sense up value.
►RS485: This function sets up the camera communication
status when controlling the camera through an external device.
►VERSION: Version of camera.
ADJUST
►SHARPNESS: Adjust the sharpness of the image.
►MONITOR: CRT monitor and LCD monitor.
* LCD: Set GAMMA,BLUE GAIN,RED GAIN.
►OSD: TEXT COLOR & OUT LINE A adjustable.
►LSC: Lens shading compensation.
►NTSC/PAL: Select NTSC/PAL.
RESET
►FACTORY: Reset the camera setting to the factory defaults.
Language and Communication status is not initialized.
EXIT
Press the ENTER button in the EXIT menu to save the
current settings and exit the MAIN SETUP menu.
5 6
7 8
■MANUAL