LETARON AED48-12VIP44-3A-Q3 User manual

AED48/60-12/24VIP44-3A-Q3 48/60W电源3A-Q3系列
LED Driver 12V/24V 30/40W
█Product Feature:
·Constant voltage
·Protection type: overload/overvoltage
·Full protective plastic case
·Class 2 driver
·Suitable for indoor LED mirror
·100% full load aging test
·3year warranty
电气规格
型号 AED48-12VIP44-3A-Q3
AED48-24VIP44-3A-Q3 AED60-12VIP44-3A-Q3 AED60-24VIP44-3A-Q3
输出
Output Voltage/输出电压 12V 24V 12V 24V
Voltage Accuracy/电压精度 ±5% ±5% ±5% ±5%
Output Current/输出电流 4A 2A 5A 2.5A
Output rated power/额定功率 48W 48W 60W 60W
Max.no Load Voltage/最大空载电压 14V 27V 14V 27V
Load Regulation/负载调整率 ±3%
输入
Voltage range/电压范围 198-264Vac
Frequency range/频率范围 47-63Hz
Power Factor/功率因数 ≥0.9
Efficiency/效率（Typ.） 88%
Input current/输入电流 770mA(Max) 840mA(Max)
Surge current/浪涌电流（Max） 13A@230Vac满负载冷态
Leakage Current/漏电流 0.5mA
Line Regulation/线性调整率 ±2%
Start up time/启动、上升时间 备注5 0.5s
Heatingfilm rated current/加热膜额定电流 0.5A@220-240Vac Max
保护
Overload/过负载 If it is greater than 1.1-1.4 times of the rated output power, the output voltage of the product will
decrease, and the abnormality will be
removed and the product will return to normal
Short circuit protection/短路保护 Output short circuit is prohibited
环境
Operating temperature/humidity /工作温度、湿度 -20℃~40℃/ 20%~90% RH
Storage Temperature/humidity /储存温度、湿度 -20℃~80℃/ 10%~95% RH
Vibration/耐振动 10~500Hz,2G 10分钟/周期,X、Y、Z轴各60分钟
Noise/噪声（最大）备注2 24DB
安规和电
磁兼容
Safety specification/安全规范 备注6 EN61347-1,EN61347-2-13 GB19510.1-2009,GB19510.14-2009
Withstand Voltage/耐压 I/P-O/P :3750Vac
Insulation Resistance/绝缘阻抗 I/P-O/P, 100Mohms/500Vdc/25℃/70%RH
Electromagnetic compatible emission/电磁兼容发射 EN55015：2019 EN61000-3-2/3 GB17625.1 GB17625.2
Electromagnetic compatibility immunity/电磁兼容抗扰
度 EN 61547 EN61000-4-2,3,4,5,6,11 GB/T17626.2,3,4,5,6,11
Lifetime/寿命 30000H
Size/尺寸 228.2mm×126.2mm×18mm
Packaging/包装 420×315×285mm-A=A-标准箱
备注
1. Unless otherwise specified, all specifications and parameters shall be measured under 230VAC, rated load and
25 ℃ ambient temperature.
2. Noise measurement method: test within the sound box at a distance of 300mm from the product.
3. Derating output is required under low input voltage. Please refer to the static characteristic curve for

File Name:AED40 2022-10-20
details.
4. The power supply is regarded as a component used together with the terminal equipment. Because EMC is
affected by the whole set of devices, the terminal equipment manufacturer needs to re confirm EMC for the whole
set of devices.
5. The starting time is measured under the cold start state, and continuous startup and shutdown may make the
starting time longer.
6. The model certified by CCC, CE and TUV (EN61347-1 EN61347-2-13) is optional. Please contact LETARON for
details。
AED48/60-12/24VIP44-3A-Q3 48/60W电源 3A-Q3系列
█机构尺寸/Mechanical drawings.
单位：mm

※:接线图/Wiring diagram.
AED48/60-12/24VIP44-3A-Q3 48/60W电源 3A-Q3系列
█ 减额曲线/Deduction curve.█ 负载与输出电压特性曲线Load and output voltage characteristic curve
环境温度（℃）输入电压（Vac）
█触摸开关使用说明
0
20
40
60
80
100
-20 0 10 20 30 40 45 50 60 70
负载(％)
0
20
40
60
80
100
180 198 220 230 240 264 280 300
负载(％)

File Name:AED40 2022-10-20
Key K1: anti fog film on/off function (click on on/off).
Indicator light: the white light is on when the anti fog film is turned on, and the white light is off when the anti fog film is turned off. The
blue light comes on when touching, and goes out when releasing. Delay 60 minutes after the anti fog film is opened, and touch halfway to re time.
Key K2: Dimming function (click to open/close) slowly opens and closes.
Press and hold to adjust the brightness 10% - 100%, and the dimming should be smooth without jitter. Release or stop at the maximum and minimum,
and reverse the next touch.
Indicator light: the white light is 100% on when starting, 50% on when shutting down, and the change process is gradual. The blue light comes on
when touching, and goes out when releasing.
Key K3: Click the color temperature to switch: warm light cold light neutral light warm light cycle
Long press the stepless color adjustment (touch for more than 0.5 seconds), and the two color temperatures will be mutually adjusted under the
brightness adjusted by key 2. One color temperature will stop when it reaches the minimum value, and the next touch will be reversed.
Indicator light: the white light is 100% on when starting, 50% on when shutting down, and the change process is gradual. The blue light comes on
when touching, and goes out when releasing.
Turn off the indicator light: In any mode, press and hold three keys at the same time to turn off the indicator light. Press any key to turn on
the indicator.
Power off memory: remember the state before power off, and the brightness, color temperature and switch state of the lamp remain the state when
power off (power off memory).