LevelOne OAN-2150 User manual

OAN-2150
WAN-2180
Enhanced Antenna for Wireless Devices
User Manual

OAN-2150 15dBi Omni-Directional Outdoor Antenna
Electrical Specification
Frequency range 2400 MHz – 2500 MHz
Gain 14.5±0.5 dBi
VSWR 1.8 : 1 Max.
Polarization Linear, vertical
HPBW / horizontal 360°
HPBW / vertical 15°
Downtilt 0°
Power handling 20 W (cw)
Impedance 50 Ω
Connector N female
Package content:
OAN-2150
Mounting Kit
CLF400 3M Cable
CLF200 1.5M Cable
Surge Protector
Installation:
Step 1 Mount OAN-2150 on a pole or wall.
Pole Mounting
.
Environmental & Mechanical
Characteristics
Survival wind speed 216 km/hr
Temperature -40℃to +80℃
Humidity 100% @ 25℃
Lightning protection DC ground
Radome material Fiberglass
Weight 1.8 kg
Dimensions H1860mm * D51mm
Step 2 Connect outdoor low loss extension cable (with N male
connector) to OAN-2150. Water resistant of connector can be ensured
with a waterproof tape. (optional)
Step 3 To protect your wireless device, attach a surge protector to the
other side of the low loss extension cable.
Step 4 Connect surge protector to your wireless device. Use an
adapter if the connector of surge protect is different from your wireless
device RF connector.
Antenna
Wireless device
Outdoor low loss
extension cable Surge protector
Adapter

WAN-2180 18dBi Directional Panel Outdoor Antenna
Electrical Specification
Frequency range 2400 MHz – 2500 MHz
Gain 18 dBi
VSWR ≦1.5.
Polarization Linear, vertical
HPBW / horizontal 17°
HPBW / vertical 17°
Front to back ratio 20 dB
Power handling 30 W (cw)
Impedance 50 Ω
Connector N female
Package content:
WAN-2180
Mounting Kit
CLF400 3M Cable
CLF200 1.5M Cable
Surge Protector
Installation:
Step 1 Screw the L type mounting base at rear of the panel antenna
Environmental & Mechanical
Characteristics
Survival wind speed 216 km/hr
Temperature -2
0℃to +80℃
Humidity 95% @ 55℃
Lightning protection DC ground
Radome material ABS Grey
Weight 800g
Dimensions 365×365mm
Step 2 Mount the panel antenna with the pole by using U shape grip
Step 3 Connect outdoor low loss extension cable (with N male
connector) to WAN-2180. Water resistant of connector can be ensured
with a waterproof tape. (optional)
Step 4 To protect your wireless device, attach a surge protector to the
other side of the low loss extension cable.
Step 5 Connect surge protector to your wireless device. Use an
adapter if the connector of surge protect is different from your wireless
device RF connector.
Surge protector
Antenna Outdoor low loss
extension cable
Wireless device
Adapter