LevelOne BOH-1100 User manual

BOH-1100 Box-type Outdoor Housing
Quick Installation Guide
CHECK YOUR PACKAGE CONTENT S
The carton should contain the following items:
 BOH-1100
 Camera Bracket
 Screw Kit
 Quick nstallation Guide
f any item is found missing or damaged, please contact your local reseller for replacement.
INTRODUCTION
The BOH-1100 is constructed from die casting aluminum with environmental protection to level
P66. There is a fan and heater included.
Fan would operate once the temp. is over 35℃ and would stop once the temperature is under
25℃ again.
Heater would operate once the temperature is under 15℃ and would stop once the
temperature is over 25℃ again.
406mm(L) x 145mm (W) x 109mm (H)
Windows 76mm x 92mm
All tightened by E Screw.

INSTALL HOUSING WITH BRACKET
Lock 4 mounting holes with screws on the bottom side.
nner nstruction:
4. 4.
4. 4.4. 4.
4. 4.
1. 3.
1. 3. 1. 3.
1. 3. 5
5 5
5.
..
.
6
66
6.
..
. 2.
2. 2.
2.
1. Camera mounting platform
2. Captive retaining screws X2
3. Cable Conduits
4. Connector buckle
5. Fan (only accept DC12V power)
6. Heater (only accept DC12V power)

Power Relay Board:
1.
1. DC12V/1.5A power input
2. Power supply to fan
3.
Power supply to heater
Note:

Default camera housing package don’t include power adapter

when use the optional power adapter to connect the PCB of the housing , you have to cut adapter’s power
line to plug y manually
2
.
1.
3
.