LevelOne IGP-1031 User manual

User Manual
IGP-1031
10-Port Indusrial PoE Gigabit Switch Manual
Package Contents
• IGP-1031
•
User Manual

CE Marking Warning
CE marking is a certification mark that indicates conformity with health, safety, and
environmental protection standards for products sold within the European Economic Area
(EEA).The CE marking is also found on products sold outside the EEA that have been
manufactured to EEA standards. This makes the CE marking recognizable worldwide even to
people who are not familiar with the European Economic Area.
WEEE
WEEE is waste electrical and electronic equipment. It is end-of-life electrical and electronic
equipment and covers virtually everything with a plug or battery. ... The EC introduced the
WEEEDirectivein2002toaddressthe environmentalimpactsofunwanted electrical and
electronicequipmentat end-of-lifedisposal.
FCC Certifications
This Equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received; including interference that may cause undesired
operation.

IGP-1031
10-Port Gigabit PoE Industrial Switch, DIN-Rail, -40°C to 75°C
❖Overview
IGP-1031 is a 10-port full gigabit industrial unmanaged PoE switch that supports up to 8*10/100/1000M PoE ports, 2*
1000M SFP ports. 8*10/100/1000M ports support PoE+, conforming to IEEE 802.3af/at standard.
IGP-1031 provides two modes of Default and VLAN to adapt to various complex environments. At the same time, support
PoE Auto-check function, which is specially designed to solve the problems of equipment frozen. It can automatically
detect the frozen PD equipment and restart the ports’ output of PSE, and restart the PD device. It greatly reduces the
maintenance difficulty of engineering.
IGP-1031 has a high anti-interference ability, the product supports 6KV surge protection, 8KV contact /15KV air ESD
protection.
IGP-1031 supports wall hanging, desktop and Din-rail installation, reliable and durable, and can be used in security
network video monitoring, network engineering and other occasions.
❖Picture
www.level1.com

❖Features
With 8*10/100/1000M PoE downlink ports,2*1000M SFP ports;
Provides two modes of Default and VLAN to adapt to various complex environments;
Supports PoE Auto-check function, which is specially designed to solve the problems of equipment frozen. It can
automatically detect the frozen PD equipment and restart the ports’ output of PSE, and restart the PD device. It
greatly reduces the maintenance difficulty of engineering;
Supports relay alarm for power off, network broken, PoE off ;
6KV surge protection, 8KV contact /15KV air ESD protection;
Supports working temperature -40℃～75℃.
❖Specifications
Parameter Specifications
Power supply Powered by power adaptor
Range of voltage DC 48~57V
Consumption Self consumption<15W
Downlink ports Ports 1~8 10/100/1000Base-T PoE RJ45 ,Support IEEE 802.3af/at
Uplink ports Ports 9~10 1000M SFP slots
PoE Auto-check If detect the frozen PD device, restart it
Working mode
Default mode: normal switch mode.
VLAN mode: ports 1 ~ 8 are isolated from each other and can only communicate with the
uplink port; restrain the network storm; turn off the flow control.
Cable and distance
Use cat5e/6,100m max(Extend mode max, 250m)
Standard
IEEE802.3, IEEE802.3u, IEEE802.3z
Switch fabric
20Gbps
Though put
14.88Mpps
Buffer
1M
MAC address table
8K
Indicator
Power: 1 *red ;
Uplink 9~10: green LEDs indicate Link/Act
Downlink 1~8: On RJ45 green LEDs indicate Link/Act, yellow LEDs indicate PoE
Protection
Surge: 6KV, standard: IEC61000-4-5
ESD: 8KV: contact/15KV: air, standard:IEC61000-4-2
Working temperature
-40℃~75℃
Storage temperature
-40℃~85℃
Humidity
0~95%(No condensation)
Dimension(L×W×H)
165 mm×114 mm×50mm
Material
Metal
Colour
Black
Net-weight
1000g
www.level1.com

❖Panel diagram
❖Application
www.level1.com
www.level1.com
www.level1.com
www.level1.com
www.level1.com
www.level1.com

❖Dimensions
❖Order information
Model
Description
IGP-1031
8*10/100/1000M PoE ports, 2*1000M SFP ports,
Default, VLAN working mods;
PoE Auto-check function;
Support relay alarm for power off, network broken, PoE off ;
DC48~57V power input.
www.level1.com
Digital Data Communications GmbH
Specifications are subject to change without notice. No liability or responsibility for any errors or omissions in the content. Copyright © Digital Data Communications GmbH,
Germany. All Rights Reserved.