LevelOne PRT-1000 User manual

LevelOne
DSA-1000 / PRT-1000
Device Server / Thermal Printer
User Manual
V1.0

Table of Contents
1. Before Your Start .......................................................... 1
2. Hardware Installation ...................................................... 4
3. Getting Started ............................................................ 5
4. Configuration .............................................................. 7
1. Before Your Start
It is highly recommended to use all the supplies in the package instead of substituting
any components by other suppliers to guarantee best performance.
Web Browser : Internet Explorer (8.0 or above), Firefox, Safari
A Computer with a network adapter properly installed.
1 X RJ-45 Ethernet cable.
With the growth of the Internet age and ever increasing demand for wireless Internet access in public
locations ranging from places such as airports, hotels, conventions, stadiums, restaurants or coffee
shops, this has revolutionized the Hotspot application and becoming more and more apparent in our
daily lives.
WHG-1000 WiFi-N Hotspot Access Controller provides the perfect opportunity to generate added
revenue for your business and ensuring quality of service for customers within a secured network and
prevent unwelcomed users to access the Internet. The hotspot on-demand ticket billing kits
containing PRT-1000 Line Thermal Printer and DSA-1000 Network Device Server provides instant
ticketing for users and comes with two COM ports for redundancy where two Line Thermal Printers can
Package Contents
• DSA-1000 x 1
• PowerAdapter DC12V 1.5A x 1
• Quick Installation Guide x 1
Preface

be attached at the same time. The hotspot on-demand billing kit is designed with ease of use for
account generation via DSA-1000 Network Device Server from the built-in On-Demand billing plan from
WHG-1000 WiFi-N HotspotAccess Controller and then prints the account ticket via PRT-1000 Line
Thermal Printer.
The hotspot on-demand ticket billing kits is easy to installation and setup where the Line Thermal
Printer connects directly to DSA-1000 Network Device Server with serial port (RS-232) COM1 and
COM2 (for redundancy) and standard TCP/IP (RJ45) interface to connect to WHG-1000 WiFi-N Hotspot
Access Controller. It is simple to operate with just a few clicks on the DSA-1000 Network Device
Server and out comes the ticket from the Line Thermal Printer . .
This Quick Installation Guide provides instruction for installing the DSA-1000 for Thermal Printer(PRT-1000)

DSA-1000 Network Device Server For PRT-1000 Thermal Printer
Quick Installation Guide
4
DSA-1000 Overview

DSA-1000 Network Device Server For PRT-1000 Thermal Printer
Quick Installation Guide
5
LED Indicate :
Power : LED ON indicates power on, and OFF indicates power off.
Status : LED ON indicates the device associated with WHG-1000; LED OFF indicates the device
unassociated with WHG-1000; LED FLASH indicates the FUNCTION key activated.
Lock : LED ON indicates the Keypad locked; LED OFF indicates the Keypad unlocked; LED FLASH indicates
input digit number key for unlocking.
Link/Act : Link and activity of Ethernet port
100M : Link speed of Ethernet port.
Keypad :
-/ +: Increase (POS) and Decrease(PRE) number for selecting Plan or Function option. Press and Hold two
button for more than 5seconds(until Status LED FLASH) to reset the device to default configurations.
Enter : Click to printer On-Demand Account Tickets or Function selected.
FUNCTION :
Lock Keypad function: Press and Hold button until Lock LED ON.
Unlock Keypad function: Press button until Lock LED FLASH, then input key for unlocking.
Link Test function : Click button, then select in number 1and click Enter.
Statement Printing : Click button, then select in number 9and click Enter, the PRT-1000 will print Statement
of “Current Balance”; select in number 8and click Enter, the PRT-1000 will print Statement of “Early
Balance”.
CANCEL: Stop to print Statement, Clear input key for unlocking or cancel other event...
REPEAT: Repeat to print previous Tickets.
LED and Keypad Description

DSA-1000 Network Device Server For PRT-1000 Thermal Printer
Quick Installation Guide
6
How to reset the Network Serial Server back to factory default setting
1) First unplug the Ethernet Cable connected to the network serial server and press the reset button
2)Then press and Hold the “PRE” and “POS” buttons simultaneously for more than 5 seconds(until Status LED
FLASH) to reset the device to default configurations.
How to Lock and Unlock Keypad for On-Demand Authentication
In WHG-1000 web UI:
1) Select a Service Domain’s Authentication Type as On-Demand.
2) Under Service Domain Authentication On-Demand Billing Plan Setup: Enable and save a billing plan.
3) Under Service Domain Authentication On-Demand Thermal Printer Setup: Edit a thermal printer. After
enabling it, provide a 4 to 8 –digit Lock Password. Save everything and reboot the WHG-1000.
On the DSA-1000 keypad:
4) After WHG-1000 reboots, press the Function button (left-down) for a while until the Lock LED turns solid on.
Now the keypad is locked.
5) To Unlock the keypad, press the Function button (left-down) for a while until the Lock LED starts to blink.
6) Select the Lock password digits one by one by pressing the PRE (-) or POS (+) buttons and then pressing Enter
button after each digit. After all the keys are input, the Lock LED will turns off, which denotes the keypad is
unlocked.
The default password for the Network Serial Server is “1111”

DSA-1000 Network Device Server For PRT-1000 Thermal Printer
Quick Installation Guide
7
2. Hardware Installation
Please follow the steps mentioned below to install the hardware of DSA-1000 with WHG-1000 and
PRT-1000
1. Connect DSA-1000 to your WHG-1000 via Ethernet cable.
Connect one end of the Ethernet cable to the LAN port of DSA-1000 on the front panel. On your
environment, connect the other end of the cable to your network.
DSA-1000 also can connect to WAN1/WAN2 port of WHG-1000, but DSA-1000's
network subnet must be same with WHG-1000's WAN1/WAN2
2. Connect DSA-1000 to your PRT-1000 via the provided RS-232(DB9 to DB25) cable.
Connect one end of the RS-232 cable to COM1 port of DSA-1000 on the front panel. Connect the
other end of RS-232 cable to PRT-1000's DB25 Connector for communicating with Thermal Printer.
3. Connect the DC power adapter to the DSA-1000 power socket on the rear panel.
Please only use the power adapter supplied with the DSA-1000 package. Using a
different power adapter may damage this system

DSA-1000 Network Device Server For PRT-1000 Thermal Printer
Quick Installation Guide
8
3. Getting Started
Step :
1. Once the hardware installation is done, set the IP segment of the administrator's computer to be in the
subnet of 192.168.2.x. Since the DSA-1000's default IP address is 192.168.2.253, make sure no other
network devices are assigned an IP address of 192.168.2.253.
2. Launch a web browser to access the web GUI of DSA-1000 by entering
“http://192.168.2.253/setting.htm” in the address field.
3. After a successful login, the “Setting Page” will appear on the screen.
4. Set COM1 Settings for communicating with PRT-1000 Thermal Printer.(The default COM1 Setting
already matched with PRT-1000)
5. Configure IPAddress in the same range of WHG-1000.(The default WHG-1000's LAN IP address is
192.168.2.254)
6. Select desired Server Listening Port, default is 5000.
7. Click Apply button to enable New setting.

DSA-1000 Network Device Server For PRT-1000 Thermal Printer
Quick Installation Guide
9
4. Configuration
WHG-1000 provides wireless and wired network service with On-Demand authentication for clients in Service
Domain.Administrator can select Billing Plan on each PRT-1000 Thermal Printer. If Billing Plan is enabled,
the Thermal Printer can generate On-Demand's tickets. The clients are required to get authenticated
successfully before access the Internet.
Configuration Steps :
Step 1 : Create Billing Plans.
Click Service Domain -> Authentication -> On-Demand -> Billing Plans Setup, the Billing Plans List page
will appear. Here provides 10 sets of independent billing plans.
Select desired Billing Plan and click Edit, then setup page will appear.
Enable Billing and set desired billing plan for uses used. Below depicts an example for Billing Plan 2 S

DSA-1000 Network Device Server For PRT-1000 Thermal Printer
Quick Installation Guide
10
Step 2 : Set Virtual AP and Select On-Demand's Authentication for Service Domain
Click Service Domain, the Service Domain Setup page will appear.
Set VAP0 in Domain1 and select On-Demand in Authentication Type. Below depicts an example for Domain1
with AP0 and On-Demand's authentication.
Step 3 : Select Billing Plans for Thermal Printer.
Click Service Domain -> Authentication -> On-Demand -> Thermal Printer Setup, the Thermal Printer List
page will appear.
Select desired Thermal Printer and click Edit, then setup page will appear.
Enable Thermal Printer and set related setting with DSA-1000. Then select desired Billing Plan for Thermal
Printer. Below depicts an example.