Levoit Core 300 User manual

True HEPA Air Purifier
Model: Core 300
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
at [email protected] or at [phone].
USER MANUAL

3
EN
2
Table of Contents
Package Contents
Specifications
Safety Information
Getting to Know Your Air Purifier
Controls
Getting Started
Using Your Air Purifier
About the Filter
Levoit Replacement Filters
Care & Maintenance
Troubleshooting
Warranty Information
Customer Support
2
2
3
4
5
5
6
7
9
10
12
14
15
Package Contents
1 x Air Purifier
1 x True HEPA 3-Stage Original Filter
(Pre-Installed)
1 x User Manual
1 x Quick Start Guide
Specifications
Power Supply AC 120V, 60Hz
Rated Power 45W
Eective Range 20.3 m² / 219 ft²
CADR (CFM) 135+ CFM / 230+ m³/h
Operating
Conditions
Temperature:
-10°C–40°C /
14°F–104°F
Humidity: < 85% RH
Noise Level 24–50dB
Standby Power < 0.8W
Dimensions 22 x 22 x 36 cm /
8.7 x 8.7 x 14.2 in
Weight 3.4 kg / 7.5 lb
SAFETY INFORMATION
• Only use your air purifier as described in
this manual.
• Do not use without removing the plastic
wrap from the filter. The purifier will not
filter air, and may overheat, causing a fire
hazard.
• Do not use your air purifier outdoors.
• Keep your air purifier away from water,
and wet or damp areas. Never place in
water or liquid.
• Do not use in excessively humid areas.
• Keep your air purifier away from heat
sources.
• Do not use where combustible gases,
vapours, metallic dust, aerosol (spray)
products, or fumes from industrial oil are
present.
• Keep 1.5 m / 5 ft away from where oxygen
is being administered.
• Supervise children when they are near
the air purifier.
• Do not place anything into any opening
on the air purifier.
• Do not sit or place heavy objects on the
air purifier.
• Keep the inside of the air purifier dry. To
prevent moisture buildup, avoid placing
in rooms with major temperature changes
or underneath air conditioners.
• Always unplug your air purifier before
servicing (such as changing the filter).
To reduce the risk of fire, electric shock, or other injury, follow all instructions and
safety guidelines.
General Safety
• Keep air purifier near the outlet it is
plugged into.
• Never place the cord near any heat source.
• Do not cover the cord with a rug, carpet,
or other covering. Do not place the cord
under furniture or appliances.
• Keep the cord out of areas where people
walk often. Place the cord where it will not
be tripped over.
• This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug is
intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
• This air purifier uses standard North
American 120V, 60Hz outlets. If using
outside of North America, check for
compatibility.
Power & Cord
READ AND SAVE THESE
INSTRUCTIONS
• Do not use your air purifier if it is
damaged or not working correctly, or if
the cord or plug is damaged. Do not try
to repair it yourself. Contact Customer
Support (see page 15).
• WARNING: To reduce the risk of fire or
electric shock, do not use this air purifier
with solid-state speed controls (such as a
dimmer switch).
• Not for commercial use. Household use
only.

4 5
EN EN
GETTING TO KNOW YOUR AIR PURIFIER
A. Fan Speed Indicators
B. Fan Speed Button
C. Sleep Mode Indicator/Button
D. Timer Button
E. Timer Indicators
F. On/O Button
G. Display Lock Button
H. Check Filter Indicator
Front, upside downBack
I. Display O Button
J. Air Outlet
K. Housing
L. Air Inlet
M. Anti-Skid Pads
N. Filter Cover
O. True HEPA 3-Stage Original Filter
K
J
L
B
C
D
G
H
I
N
O
A
E
FM
CONTROLS
On/O Button
• Turns the air purifier on/o.
Fan Speed Button
• Cycles through fan speeds:
I (low), II (medium), and III
(high).
Sleep Mode Button
• Turns Sleep Mode on/o
(see page 7).
Timer Button
• Cycles through timer
options (see page 7).
Display Lock Button
• Prevents current settings
from being changed (see
page 7).
Check Filter Indicator
• Lights up when the filter
should be checked (see
page 10).
Display O Button
• Turns the display o.
• Tap any button (except )
to turn the display back on.
GETTING STARTED
1. Flip the air purifier over. Twist the filter
cover counterclockwise and remove it.
[Figure 1.1]
2. Remove the filter from its plastic
packaging and place the filter back into
the purifier with the handle facing up.
[Figure 1.2]
Figure 1.1
Figure 1.2
handle facing up

6 7
EN EN
USING YOUR AIR
PURIFIER
1. Plug in and tap to turn on the air
purifier. The fan will start on level I.
[Figure 2.1]
2. Optionally, tap to change fan speed
between I, II, and III.
3. Replace the filter cover and twist
clockwise to lock. [Figure 1.3]
4. Place the purifier on a flat, stable surface
with the display facing up. Allow at least
15 in / 38 cm of clearance on all sides
of the purifier. Keep away from anything
that would block airflow, such as curtains.
[Figure 1.4]
Note:
• The indicators are not buttons and
cannot be used to change the fan
speed.
• The fan speed indicators will light up
when active.
• Fan speed III is the loudest, but cleans
air the quickest.
• For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at high speed (level III) for
15–20 minutes before using a lower
speed.
• To eectively clean air, keep windows
and doors closed while the air purifier
is on.
3. Tap to turn o the air purifier.
Figure 2.1
Figure 1.3
Figure 1.4
15 in /
38 cm
cover should
snap shut
15 in /
38 cm
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
Note: The air purifier will not remember timers or
Sleep Mode.
GETTING STARTED (CONT.)
Sleep Mode
Sleep Mode operates quietly by using the
lowest possible fan speed.
Tap to turn Sleep Mode on/o.
Timer
You can set a timer for 2, 4, 6, or 8 hours.
1. Tap repeatedly to select a time. The
timer will start automatically.
Display Lock
Locking the display prevents settings from
being accidentally changed. Buttons will not
respond to being tapped.
1. Tap and hold for 3 seconds to lock/
unlock the display.
Note:
• You can change the fan speed at any
time while the timer is on.
• The timer will restart if the time is
changed.
Note: You can turn the display on and o
even if the display is locked.
ABOUT THE FILTER
The air purifier uses a 3-stage filtration
system to purify air.
A. Pre-Filter
• Captures large particles such as dust,
lint, fibres, hair, and pet fur.
• Maximizes the filter’s life by
protecting it.
B. True HEPA Original Filter
• Removes at least 99.97% of airborne
particles 0.3 micrometres (µm) in
diameter.
• Filters small particles such as mould
spores, tiny dust particles, parts of
smoke, and allergens such as pollen,
dander, and mites.
C. High-Eciency Activated Carbon Filter
• Physically adsorbs smoke, odours,
and fumes.
• Filters compounds such as
formaldehyde, benzene, ammonia,
hydrogen sulphide, and volatile
organic compounds (VOCs).
A
B
C
2. Once the timer has finished, the air
purifier will turn o.
3. To cancel a timer, tap until all timer
indicators are o.
Note:
• The indicators are not buttons and
cannot be used to select a time.
• The timer indicators will light up blue
when active.
Note:
• All indicators will be at half brightness
while Sleep Mode is on.
• Tapping will exit Sleep Mode.
USING YOUR AIR PURIFIER (CONT.)

8 9
EN EN
Do not add essential oils to the air purifier or
filter. The filter will become damaged by the
oil and will eventually release an unpleasant
smell. Do not use oil diusers near the
air purifier.
Essential Oils
Moisture may damage the filter. This air
purifier should be used in an area with a
humidity level below 85% RH. If you use the
air purifier in excessively humid areas, the
surface of the filter will become mouldy.
The air change rate is how many times
all of the air in a room can be purified (or
“changed”) by the air purifier in 1 hour. Air
changes per hour are calculated on the
recommended room size assuming 2.4 m /
8 ft ceilings. For smaller rooms, the air
change per hour will increase. The Core 300
has an air change per hour of 5, which means
it can change air 5 times at the max speed.
This purifier is suggested for use in a single,
closed room up to 20.3 m² / 219 ft².
Clean Air Delivery Rate (CADR) measures
the eciency of an air purifier by indicating
the volume of clean air that an air purifier
produces per minute. This is based on
removal of dust, pollen, and smoke, which
are the 3 most common indoor air pollutants.
The higher the CADR, the more particles the
air purifier will remove and the larger the area
it can clean. The rating is measured at the air
purifier’s highest speed.
Humidity
Air Change Per Hour
Clean Air Delivery Rate
Note: Water or moisture will allow mould to
grow. Air purifiers cannot solve an existing
mould problem, only remove mould spores
and reduce odours.
Note: To eectively clean air, keep windows
and doors closed while the air purifier is on.
ABOUT THE FILTER (CONT.)
Choose the filter best suited to the environment of your home.
Traps fine particles such as dust mites, pollen, pet dander, mould, and bacteria while neutralizing
common household smells such as pet odours or cooking smells.
Best used for: allergies, dust, and minor odours
Get all the benefits of the Original Filter, but with the high-eciency activated carbon filter which is
very eective for strong smells, and is customized for pet odours and cooking smells.
Best used for: pet allergies, bad-smelling rooms
Get all the benefits of the Original Filter, but with the high-eciency activated carbon filter which
is very eective for strong smells, and is customized for air pollution, cigarette smoke, vehicle
exhaust, toxic gases and fumes, volatile organic compounds (VOCs), and smoke from wildfires.
Best used for: high air pollution, smoke
Core 300-RF
Levoit True HEPA 3-Stage Original Filter
Core 300-RF-PA
Levoit True HEPA 3-Stage Pet Allergy Filter
Core 300-RF-TX
Levoit True HEPA 3-Stage Toxin Absorber Filter
LEVOIT REPLACEMENT FILTERS
Note: Your air purifier comes with an Original Filter included.
Get the benefits of the Original Filter, but with an additional antibacterial treatment which is very
eective for trapping and neutralizing bacteria and mould spores.
Best used for: mould, bacteria, and musty environments
Core 300-RF-MB
Levoit True HEPA 4-Stage Mold and Bacteria Filter

10 11
EN EN
Resetting the Check
Filter Indicator
Reset the Check Filter Indicator when:
A. lights up.
1. Replace the filter.
2. Turn on the air purifier.
3. Press and hold for 3 seconds.
4. will turn o when successfully
reset.
B. The filter was changed before
lit up.
1. Press and hold for 3 seconds.
This will turn on .
2. Press and hold again for 3
seconds.
3. will turn o when successfully
reset.
CARE & MAINTENANCE
Figure 3.1
will light up as a reminder to check the
filter. Depending on how much you use the
air purifier, the indicator should turn on within
6–8 months. You may not need to replace
your filter yet, but you should check it when
turns on.
Check Filter Indicator
Cleaning the Air Purifier
• Unplug before cleaning.
• Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
• Vacuum the inside of the air purifier.
• Do not clean with abrasive chemicals or
flammable cleaning agents.
Filter When to Clean How to Clean When to Replace
Pre-Filter Every 2–4
weeks
Use a soft brush or vacuum
hose [Figure 3.1]
6–8 months
True HEPA
& Activated
Carbon Filter
Do not clean
The outer pre-filter should be cleaned
every 2–4 weeks to increase the eciency
and extend the life of your filter. Clean the
pre-filter using a soft brush or vacuum hose
to remove hair, dust, and large particles.
[Figure 3.1] Do not clean the filter with water
or other liquids.
Cleaning the Filter
1. Unplug the air purifier. Flip the air purifier
over and remove the filter cover (see
Getting Started, page 5).
2. Remove the old filter.
3. Clean out any remaining dust or hair
inside the purifier using a vacuum hose.
Do not use water or liquids to clean the
purifier. [Figure 3.2]
4. Unwrap the new filter and place it
into the housing (see Getting Started,
page 5).
5. Replace the cover. Plug in the air purifier.
6. Reset the Check Filter Indicator (see
page 10).
Replacing the Filter
Figure 3.2
If not using the air purifier for an extended
period of time, wrap both the purifier and the
filter in plastic packaging and store in a dry
place to avoid moisture damage.
Storage
CARE & MAINTENANCE (CONT.)
The filter should be replaced every 6–8
months. You may need to replace your filter
earlier or later depending on how often you
use your air purifier. Using your air purifier in
an environment with relatively high pollution
may mean you will need to replace the filter
more often, even if is o.
You may need to replace your filter if you
notice:
• Increased noise when the air purifier
is on
• Decreased airflow
• Unusual odors
• A visibly clogged filter
When Should I Replace the
Filter?
Note:
• To maintain the performance of your air
purifier, only use ocial Levoit filters.
To buy replacement filters, visit Levoit’s
online store. Go to levoit.com for more
information.
• Remember to reset after changing
the filter.
To maintain the performance of
your air purifier, only use ocial
Levoit filters. To buy replacement
filters, scan the QR code or
go to amazon.ca and search
B07RSZSYNC. You can check the
ocial website, levoit.com, for
more information.

12 13
EN EN
Problem Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop
using the air purifier and contact Customer Support (see
page 15).
Plug the air purifier into a dierent outlet.
The air purifier is malfunctioning. Contact Customer
Support (see page 15).
Airflow is significantly reduced. Make sure the filter is removed from its packaging and
properly in place (see page 5).
Tap to increase the fan speed.
Leave 38 cm / 15 in of clearance on all sides of the
air purifier.
The pre-filter may be clogged by large particles, such as
hair or lint, blocking airflow. Clean the pre-filter
(see 10).
Replace the filter (see page 11).
Air purifier makes an unusual
noise while the fan is on.
Make sure the filter is properly in place with plastic
packaging removed (see page 5).
Make sure the air purifier is operating on a hard, flat, even
surface.
Replace the filter (see page 11).
The air purifier may be damaged, or a foreign object may
be inside. Stop using the air purifier and contact Customer
Support (see page 15). Do not try to repair the air purifier.
Strange smell coming from the
purifier.
Clean the filter or replace if necessary.
Contact Customer Support (see page 15).
Make sure not to use your purifier in an area with high
humidity or while diusing essential oils.
TROUBLESHOOTING
If your problem is not listed, please contact Customer Support (see page 15).
TROUBLESHOOTING (CONT.)
Problem Possible Solution
Poor air purification quality. Tap to increase the fan speed.
Make sure no objects are blocking the sides or top of the
air purifier (the inlet or outlet).
Make sure the filter is removed from its packaging and
properly in place (see page 5).
Close doors and windows while using the air purifier.
Make sure the room is smaller than 20.3 m² / 219 ft².
The air purifier may not be as eective in larger rooms.
Replace the filter (see page 11).
is still on after replacing
the filter.
Reset the Check Filter Indicator (see page 11).
has not turned on within 8
months.
is a reminder for you to check the filter and will light
up based on how much the air purifier has been used (see
10). If you don’t use your air purifier often, will take
longer to turn on.
turned on before 6 months. is a reminder for you to check the filter and will light
up based on how much the air purifier has been used (see
page 10). If you run your air purifier frequently, will
turn on sooner.

14 15
EN EN
Terms & Policy
Etekcity Corporation (“Etekcity”) warrants this
product to the original purchaser to be free from
defects in material and workmanship, under
normal use and conditions, for a period of one
year from the date of original purchase.
Etekcity agrees, at our option during the
warranty period, to repair any defect in material
or workmanship or furnish an equal product in
exchange without charge, subject to verification
of the defect or malfunction and proof of the date
of purchase.
There is no other express warranty. This
warranty does not apply:
• If the product has been modified from its
original condition;
• If the product has not been used in accordance
with directions and instructions in the user
manual;
• To damages or defects caused by accident,
abuse, misuse or improper or inadequate
maintenance;
• To damages or defects caused by service
or repair of the product performed by an
unauthorized service provider or by anyone
other than Etekcity;
• To damages or defects occurring during
commercial use, rental use, or any use for
which the product is not intended;
• To damages or defects exceeding the cost of
the product.
Etekcity will not be liable for indirect, incidental,
or consequential damages in connection with the
use of the product covered by this warranty.
This warranty extends only to the original
consumer purchaser of the product and is
not transferable to any subsequent owner of
the product regardless of whether the product
is transferred during the specified term of the
warranty.
This warranty does not extend to products
purchased from unauthorized sellers. Etekcity’s
warranty extends only to products purchased from
authorized sellers that are subject to Etekcity’s
quality controls and have agreed to follow its quality
controls.
ALL IMPLIED WARRANTIES ARE LIMITED TO THE
PERIOD OF THIS LIMITED WARRANTY.
This warranty gives you specific legal rights
and you may also have other rights which vary
from state to state. Some states do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may
not apply to you.
If you discover that your product is defective within
the specified warranty period, please contact
Customer Support via [e-mail]. DO
NOT dispose of your product before contacting us.
Once our Customer Support Team has approved
your request, please return the product with a copy
of the invoice and order ID.
Extend Your Warranty by 1 Year
Register your product within 14 days of purchase at
www.etekcity.com/warranty to extend your 1-year
warranty by an additional year.
This warranty is made by:
Etekcity Corporation
1202 N. Miller St. Suite A
Anaheim, CA 93806
Product Name True HEPA Air Purifier
Model Core 300
Default Warranty
Period
1 year
For your own reference, we strongly recommend
that you record your order ID and date of
purchase.
Date of Purchase
Order ID
WARRANTY INFORMATION CUSTOMER SUPPORT
If you have any questions or concerns about
your new product, please contact our helpful
Customer Support Team.
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Email: [email protected]
Toll-Free: [phone]
Mon–Fri, 9:00 am–5:00 pm PST/PDT
Support Hours
*Please have your order invoice and order ID
ready before contacting Customer Support.

JJ062420GY-M1_0620Core300_ca
/LEVOITLIFESTYLE
/LEVOIT
/LEVOIT
/LEVOIT
LEVOIT.COM