Lex System 2I392CW User manual

2I392CW
Intel Apollo Lake N4200 / N3350 / E3950 SoC CPU ,
DDR3L SODIMM, 2 x LAN / HDMI / USB / COM
/ PCIe mini card
All-In-One eIO extension SBC
Intel Apollo Lake N4200 / N3350 / E3950 SoC CPU
2 x HDMI, LVDS, 2 x mini PCIe, 2 x LAN, Audio
SATA, USB, COM, eIO, Wide Range DC-IN
NO. 2I392CW
Release date: Apr. 11. 2018

i
2I392CW
Warning!...........................................................................................................................
Hardware Notice Guide .............................................................................................
CHAPTER 1 GENERAL INFORMATION ........................................................................
1-1 MAJOR FEATURE........................................................................................................
1-2 SPECIFICATION ..........................................................................................................
1-3 INSTALLING THE SO-DIMM ........................................................................................
1-3-1 REMOVING THE SO-DIMM ......................................................................................
1-4 INSTALLING THE MINI PCI-E CARD (FULL SIZE) .....................................................
1-5 PACKING LIST .............................................................................................................
CHAPTER 2 HARDWARE INSTALLATION ....................................................................
2-1 UNPACKING PRECAUTION ........................................................................................
2-2 UNPACKING CHECKUP ..............................................................................................
2-3 DIMENSION-2I392CW ................................................................................................
2-4 LAYOUT-2I392CW-CONNECTOR AND JUMPER .......................................................
2-4-1 LAYOUT-2I392CW-CONNECTOR AND JUMPER BOT ............................................
2-5 LAYOUT-2I392CW-FUNCTION MAPTOP ...................................................................
2-5-1 LAYOUT-2I392CW-FUNCTION MAP BOT ...............................................................
2-6 DIAGRAM-2I392CW TOP ............................................................................................
2-6-1 DIAGRAM-2I392CW BOT .........................................................................................
2-6-2 FUNCTION MAP-2I392CW ......................................................................................
2-7 LIST OF JUMPERS ......................................................................................................
2-8 JUMPER SETTING DESCRIPTION ............................................................................
2-9 JSB1: COMS DATA CLEAR .........................................................................................
2-10 JVL1:LCD PANEL POWER SELECT .........................................................................
2-11 JVC1/2: COM1/2 RI& POWER SELECT ....................................................................
CHAPTER 3 CONNECTION ..........................................................................................
3-1 LIST OF CONNECTORS..............................................................................................
3-2 COMS BATTERY CONNECTOR .................................................................................
3-3 AUDIO INTERFACE .....................................................................................................
3-4 COM INTERFACE ........................................................................................................
3-5 FRONT PANEL PIN HEADER......................................................................................
3-6 DIGITAL INPUT/OUTPUT/WATCH DOG TIME ............................................................
3-6-1 IO DEVICE: F75111 UNDER DOS ............................................................................
3-6-2 IO DEVICE: F75111 UNDER WINDOWS ..................................................................
3-6-3 IO DEVICE: F75111 VB6 UNDER WINDOWS ..........................................................
3-6-4 IO DEVICE: F75111 UNDER LINUX .........................................................................
3-7 LAN INTERFACE .........................................................................................................
3-8 I2BUS INTERFACE ......................................................................................................
Contents
1
2
4
5
6
7
9
10
11
12
12
13
14
15
16
17
18
19
20
21
22
22
23
24
24
25
25
26
27
28
29
30
31
33
39
43
48
49

ii
49
50
51
53
55
56
57
58
59
60
61
61
62
63
64
65
66
67
68
69
70
71
72
73
75
76
77
78
79
81
82
83
84
86
87
88
89
90
3-9 DC POWER INPUT ......................................................................................................
3-10 DC +12V/+5 VOLTAGE POWER OUTPUT ......................................................................
3-11 USB INTERFACE .......................................................................................................
3-12 DISPLAY INTERFACE ...............................................................................................
3-13 CPP1: PANEL INVERTER POWER (1X5 PIN 2.0MM WAFER) .................................
3-14 CT1: TOUCH SCREEN (2X5 PIN 2.0MM WAFER) USB INTERFACE ......................
3-15 SATA INTERFACE .....................................................................................................
3-16 LEX eIO CONNECTOR ..............................................................................................
3-17 PCI EXPRESS MINI CARD ........................................................................................
3-18 CONNEXTOR WAFER OF COMPATIBLE BRAND AND PART NUMBER LIST .......
CHAPTER 4 INTRODUCTION OF BIOS ........................................................................
4-1 ENTER SETUP ............................................................................................................
4-2 BIOS MENU SCREEN & FUNCTION KEYS ................................................................
4-3 GETTING HELP ...........................................................................................................
4-4 MENU ..........................................................................................................................
4-5 ADVANCED ..................................................................................................................
4-5-1 VIDEO CONFIGURATION ........................................................................................
4-5-2 SOUTH CLUSTER CONFIGURATION .....................................................................
4-5-2-1 HD-AUDIO CONFIGURATION ..............................................................................
4-5-2-2 PCI EXPRESS CONFIGURATION ........................................................................
4-5-2-2-1 MPC1/EIO P2 .....................................................................................................
4-5-2-3 SATA CONFIGURATION .......................................................................................
4-5-3 THERMAL .................................................................................................................
4-5-4 SIO FINTEK81801U CONFIGURATION ...................................................................
4-6 SECURITY ...................................................................................................................
4-7 POWER .......................................................................................................................
4-8 BOOT ...........................................................................................................................
4-9 EXIT .............................................................................................................................
CHAPTER 5 DRIVER INSTALLATION ...........................................................................
5-1 INF INSTALL INTEL APOLLO LAKE CHIPSET DRIVER .............................................
5-2 VGA INSTALL INTEL APOLLO LAKE VGA DRIVER ...................................................
5-3 SERIAL IO INSTALL DRIVER APOLLO LAKE SERIAL IO DRIVER .............................
5-4 HD AUDIO INSTALL HIGH DEFINITION AUDIO DRIVER ...........................................
5-5 LAN INSTALL INTEL LAN DRIVER ..............................................................................
5-6 TXE INSTALL INTEL TXE DRIVER ..............................................................................
5-7 HOW TO UPDATE INSYDE BIOS ...............................................................................
APPENDIX A:POWER CONSUMPTION TEST .................................................................
APPENDIX B:RESOLUTION LIST .....................................................................................

Copyright
This manual is copyrighted and all rights are reserved. It does not allow any non
authorization in copied, photocopied, translated or reproduced to any electronic or machine
readable form in whole or in part without prior written consent from the manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special, incidental
or consequential damages arising from the use of inability to use the product or
documentation, even if advised of the possibility of such damages.
The manufacturer keeps the rights in the subject to change the contents of this manual
without prior notices in order to improve the function design, performance, quality, and
reliability. The author assumes no responsibility for any errors or omissions, which may
appear in this manual, nor does it make a commitment to update the
information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned here are for
identification purposes only, and may be trademarks and/or registered trademarks
of their respective companies or owners.
© Copyright 2018
All Rights Reserved.
User Manual edition 0.1, Apr1 2018

1
Warning !
1. Battery
Batteries on board are consumables.
The life time of them are not guaranteed.
2. Fless solution with HDD
The specification & limitation of HDD should be considered carefully when
the fanless solution is implemented.
3. We will not give further notification in case of changes of
product information and manual.
4. SATA interface does not support Hot SWAP function.
5. There might be a 20% inaccuracy of WDT at room temperature.
6. Please make sure the voltage specification meets the requirement
of equipment before plugging in.
8. Caution! Please notice that the heat dissipation problem could cause the MB
system unstable. Please deal with heat dissipation properly when
buying single MB set.
9. Please avoid approaching the heat sink area to prevent users from
being scalded with fanless products.
12. It is important to install a system fan toward the CPU to decrease
the possibility of overheating / system hanging up issues,
or customer is suggested to have a fine cooling system to dissipate heat
from CPU.
11. DO NOT apply any other material which may reduce cooling
performance onto the thermal pad.
10. If users repair, modify or destroy any component of product unauthorizedly,
We will not take responsibility or provide warranty anymore.
7. There are two types of SSD, commercial grade and industrial grade, which
provide different read/write speed performance, operation temperature and
life cycle. Please contact sales for further information before making orders.

2
Hardware Notice Guide
1. Before linking power supply with the motherboard, please attach DC-in adapter to
the motherboard first. Then plug the adapter power to AC outlet.
Always shut down the computer normally before you move the system unit or
remove the power supply from the motherboard. Please unplug the DC-in adapter first
and then unplug the adapter from the AC outlet.
Please refer photo 1 as standard procedures.
2. In case of using DIRECT DC-in (without adapter), please check the allowed range
for voltage & current of cables. And make sure you have the safety protection for
outer issues such as short/broken circuit, overvoltage, surge, lightning strike.
3. In case of using DC-out to an external device, please make sure its voltage and
current comply with the motherboard specification.
4. The total power consumption is determined by various conditions
(CPU / motherboard type, device, application, etc.). Be cautious to the power cable
you use for the system, one with UL standard will be highly recommended.
5. It’s highly possible to burn out the CPU if you change / modify any parts of
the CPU cooler.
6. Please wear wrist strap and attach it to a metal part of the system unit
before handling a component. You can also touch an object which is
ground connected or attached with metal surface if you don't have wrist strap.
7. Please be careful to handle & don't touch the sharp-pointed components on
the bottom of PCBA.
8. Remove or change any components form the motherboard will VOID the warranty of
the motherboard.
9. Before you install / remove any components or even make any jumper setting
on the motherboard, please make sure to disconnect the power supply first.
(follow the aforementioned instruction guide)
10. "POWERON after PWR-Fair" function must be used carefully as below:
When the DC power adaptor runs out of power, unplug it from the DC current;
Once power returns, plug it back after 5 seconds.
If there is a power outage, unplug it from the AC current, once power returns,
plug it back after 30 seconds. Otherwise it will cause system locked or made
a severe damage.
Remark 1:
Always insert / unplug the DC-in horizontally & directly to / from the motherboard.
DO NOT twist, it is designed to fit snugly.
Moreover, erratic pull / push action might cause an unpredictable damage to the
component & system unit.
*

3
2
1
3
1
2
3
Photo 1 Insert
Unplug

4
Chapter-1
General Information
The 2I392CW is a Pico-ITX SBC with LEX eIO (2 x PCIe + USB) expansion function
offer the ideal & reliable platforms for high performance applications in Digital Signage,
medical devices, POS / Kiosk, gaming machines, automation, military & industrial facilities.
2I392CW is powered by the latest Apollo Lake SoC 14nm quad-core Mobile Intel®
Pentium processor N4200 or dual-core Mobile Intel® Celeron processor N3350 with 1
DDR3L SODIMM slot as well as triple independent display and fully 4K media playback
capable with on-board HDMI output, making it ideal for deployment in transportation,
digital signage and multi-display applications. 2I392CW also supports with two 10 / 100
/ 1000 Mbps Ethernet for seamless broadband connectivity. With Wake-On LAN function
and the PXE function in BIOS, these are perfect control boards for networking devices.
The embedded motherboard 2I392CW is specially designed with wide-Range Voltage DC
in (9~36V) for widely varying input voltage requirement. This integrated platform offers
superb performance and PC specification in the industry. It supports up to two serial ports
RS232 / RS485 / RS422 jumper free auto switch by BIOS and 4 ports of USB 3.0 in the
rear side, 2 port of USB 2.0 internal port for expansion (signal shared with Mini Cards
). The expandable interfaces include 1 full-size PCIe Mini card for PCIe x 1 or and USB
interface, and 1 full-size PCIe Mini card for mSATA and USB interface.
2I392CW with LEX eIO (2 x PCIe + USB) expansion function to pair with LEX multi-
function compact size eIO extension cards such as L2L001, L2L002, L2L003, L2L004,
L2M001 etc. to expand more LAN ports, PCIe Mini cards or fiber optic LAN port. Please
visit our website to find the Compact solution with Rich Expansion for vertical application.

5
1. Mobile Intel® Pentium N4200 1.1GHz / 2.5GHz, (Quad core), Mobile Intel® Celeron
N3350 1.1GHz / 2.4GHz (Dual core)
2. Apollo-Lake Integrated Graphics chipset, Mobile Intel® Pentium N4200 200MHz /
700MHz, Mobile Intel® Celeron N3350 200MHz / 650MHz
3. Support eDP 1.3 2 Lanes up to 1920 x 1200, DVI 1.2 1920 x 1080, HDMI 1.4b up to
3840 x 2160
4. DDR3L SODIMM slot x 1, up to 8GB
5. Support 2 x 10 / 100 / 1000 Mbps Intel LAN port.
6. Support 2 x RS232 auto switch to RS485 / RS422 by BIOS, 2 port internal
7. 4 x type A USB 3.0 and 2 x USB 2.0 internal (signal shared with Mini Cards)
8. ALC886 HD Audio Specification 1.0 Two channel sound
9. Support extended 1 x full-size Mini PCIe card for PCIe x 1 and USB interface,
1 x full-size Mini PCIe card for mSATA and USB interface.
10. Support 1 SATA port
11. Hardware digital Input & Output, 4 x DI / 4 x DO, Hardware Watch Dog Timer,
0~255 sec programmable
12. Wide Range DC IN +9V~36V
13. PCB Dimension: 102 x 83 mm
1-1 Major Feature

6
1. SOC: Mobile Intel® Pentium N4200 1.1GHz / 2.5GHz, (Quad core), Mobile Intel®
Celeron N3350 1.1GHz / 2.4GHz (Dual core)
2. Memory: DDR3L SODIMM slot x 1, up to 8GB
3. Graphics: Apollo-Lake Integrated Graphics chipset, Mobile Intel® Pentium N4200
200MHz / 700MHz, Mobile Intel® Celeron N3350 200MHz / 650MHz, eDP 1.3 2
Lanes up to 1920 x 1200, DVI 1.2 1920 x 1080, HDMI 1.4b up to 3840 x 2160
4. SATA: Integrated Serial ATA Host Controller 1 SATA port, SATA Gen3 Data transfer
rates up to 6.0 Gb/s (600 MB/s). SATA signal shared with PCIe Mini card 1
5. LAN: 2 Intel I211-AT LAN chipset with 10 / 100 / 1000 Mbps for PCIe x 1 V2.1
6. l/O Chip: F81801U I/O chipset for 2 ports RS232 / RS422 / RS485 auto switch by BIOS
7. USB: 4 type A USB 3.0 connectors onboard, 2 USB 2.0 (internal) signal shared with
Mini Cards.
8. Sound: Support line in, line out and MIC in
9. WDT/DIO: Hardware digital Input & Output, 4 x DI / 4 x DO (Option) / Hardware
Watch Dog Timer, 0~255 sec programmable
10. Expansion interface: one full-size PCIe Mini card for PCIe x 1and USB interface,
one full-size Mini PCIe card for mSATA and USB interface
11. BIOS: Insyde UEFI BIOS
12. Dimension: 102 x 83 mm (2.5 inch)
13. Power: On board DC +9~36V
1-2 Specification

7
1-3 Installing the SO-DIMM
1. Align the SO-DIMM with the connector at a 45 degree angle.
2. Press the SO-DIMM into the connector until you hear a click.

8
Notices:
1.The connectors are designed to ensure the correct insertion. If you feel resistance,
check t h e connectors & golden finger direction, and realign the card.
2. Make sure the retaining clips (on two sides of the slot) lock onto the notches of
the card firmly.

9
1-3-1-1 Removing the SO-DIMM
1. Release the SO-DIMM by pulling outward the two retaining clips and
the SO-DIMM pops up slightly.
2. Lift the SO-DIMM out of its connector carefully.

10
1-4 Installing the Mini PCI-e Card (Full Size)
1. Unscrew the screw on the board
3. Gently push down the Mini Card and screw the screw back.
2. Plug in the Mini Card in a 45 angle

11
1-5 Packing List
Material Code Description Detail Specification Quantit
17G1901-1805001-0 MB-2I392CW-N4-001 LF,2I392CW-N4,Rev.:001 1
26G6003-7330-0100 Power Cable LF,L=9cm,2.0 1*4/DC JK 1
36G6003-1009-0100 SATA Power Cable LF,L=25cm,1*4/2.0 to 180° SATA 15p 1
46G6001-2203-0100 SATA DATA Cable (Red) LF,L=25cm 1
56G8006-2350-0100 DVD LF, Support Apollo Lake/Skylake 1
66G5212-0620-0100 ■60W Power
Adapter,12V/5A,2.5Ø LF,L Type,FSP060-DIBAN2,FSP 1
*The packing list above is for the users who purchase single motherboard. The users
who purchase the board with chassis may refer to the packing list in the Assembly Guide.
Please contact with your dealer if any of these items is missing or damaged
on delivery. And please keep all parts of the delivery package with packing
materials in case if you need to deliver or store the product in the future.

12
Chapter-2
This chapter provides the information how to install the hardware of 2I392CW.
Please follow section 1-5, 2-1 and 2-2 to check the delivery package and unpack
carefully. Please follow the jumper setting procedure.
You should follow these
steps to protect the board from the static electric
discharge whenever you handle the board:
1. Ground yourself by a grounded wrist strap at all times when you
handle the 2I392CW.
Well secure the ALLIGATOR clip of the strap to the end of the shielded wire lead from
a grounded object. Please put on and connect the strap before handling the
2I392CW for harmlessly discharge any static electricity
through the strap.
2. Please use anti-static pad to put any components, parts, or tools on the pad whenever
you work on them outside the computer. You may also use the anti-static bag instead of
the pad. Please ask your local supplier for necessary parts on anti-static requirement.
3. Do not plug any connector or set any jumper when the power is on.
Hardware Installation
2-1 Unpacking Precaution
NOTE!
1. Do not touch the board or any other sensitive components without all necessary
anti-static protection.
2. Please pay attention to the voltage limitation of DC-IN 12V 5%.
Overuse of DC-IN voltage limitation or change to another power adapter
(not provided with this system) will VOID warranty.

13
First of all, please follow all necessary steps of section 2-1 to protect 2I392CW
from electricity discharge. With reference to section 1-5
please check the delivery package again with following steps:
1. Unpack the 2I392CW board and keep all
packing material, manual and driver disc etc, do not dispose !
2. Is there any components lose or drops from the board?
DO NOT CONTINUE TO INSTALL THIS BOARD!
CONTACT THE DEALER YOU PURCHASED
THIS BOARD FROM, IMMEDIATELY.
3. Is there any visible damage on the board?
DO NOT CONTINUE TO INSTALL THIS BOARD!CONTACT
THE DEALER YOU PURCHASED THIS BOARD FROM, IMMEDIATELY.
4. Check your optional parts (i.e. DDR, CF etc.), all necessary jumpers
setting to jumper pin-set, and CMOS setup correctly.
Please also refer to all information of jumper settings in this manual.
5. Check your external devices (i.e. Add-On-Card, Driver Type etc.)
for complete add-in or connection and CMOS setup correctly.
Please also refer to all information of connector connection in this manual.
6. Please keep all necessary manual and driver disc in a good condition for future
re-installation if you change your Operating System.
2-2 Unpacking checkup

14
2-3 Dimension-2I392CW

15
2-4 Layout-2I392CW-Connector and Jumper
TOP
CL2
CL1
CU12
HDM2
HDM1
CU7 CPI1 EIO CALR1
CA3
MPCE1
CU5
CU6
MPCE2
SODIM1
CPP1
CT1
CC2
CPO1
CO1
CC1
JVC1
JVC2
CFP1
CIO1
LVDS1
JVL1
JSB1
CBT1

16
2-4-1 Layout-2I392CW-Connector and Jumper Bottom
BOT
CU3
CU4
SATA1