Lexie Lumen User manual

Electronic Hearing Aid Dryer
User Manual V1.0

Important Safeguards
This product is for hearing aid use only. When using electrical products, basic safety
precautions should always be followed (especially when children are present).
Read all the instructions before use.
This user manual will show you how to use and maintain your electronic hearing aid dryer. Please read
this carefully.

1
Operating instructions
Moisture is one of the most common reasons for hearing aid repairs. An electronic hearing aid dryer, also called a hearing
aid dehumidifier, is a device that absorbs the moisture from hearing aids. It slowly warms and circulates the air inside the
dryer allowing the various hearing aid parts to dry. Dryers like this one, which is equipped with a UV light, also disinfect
hearing aids.
One Touch Sensor Button
USB Cable Socket
Briefly press it to switch on your dryer.
To pause the drying program, briefly press
it for more than 2 seconds.

2
Insert the USB cable into the 5V power adapter. Plug the connector into the socket on the rear side of your dryer.
Plug the power adapter into an AC power socket.
Clean the hearing aids before inserting them into the dryer.
Remove the batteries of the hearing aids.
Open the lid of the dryer and place your hearing aids in the dryer, with the battery door open.
Press the sensor button and then close the lid. The red light will go on and the drying program will start. It will
automatically stop after four hours.
Open the lid and remove the dried and disinfected hearing aids.
1.
2.
3.
4.
5.
6.
7.
Note:
Only use the 5V power adaptor that has been included.

3
Note:
The drying program can be stopped by pressing the sensor button for more than 2 seconds. Press the sensor button again to restart the
program.
The red LED light indicates that the unit is on.
The UV-C light is on for the first five minutes of the drying period. This stops automatically after five minutes.
Towards the end of the four-hour drying period, the UV-C light will automatically turn on again for another five
minutes.
After four hours, the dryer automatically shuts down and the LED light will turn off.
The dryer is very energy efficient; unplug the power adapter only for a prolonged absence.
The dryer has an automatic safety function that turns off the UV-C light if the lid is opened during the UV-C program.

4
Cleaning the dryer
Warnings
We recommend that you use rubbing alcohol or disinfecting wipes to clean your dryer.
The hearing aid dryer should only be operated by those who have sufficient knowledge of appropriate use or under
supervision.
Use this dryer only for the intended use as described in the manual.
Children must be supervised to ensure that they don’t use the dryer as a toy.
Do not use the dryer near water, aerosols, or fire.
Do not use corrosive or abrasive cleaning materials to clean the dryer.
Wipe the dryer on the inside and the outside.

5
Put the dryer on a flat, dry, and stable surface. Never place the dryer on a soft surface like a chair or bed.
Do not disassemble the dryer and only use the supplied 5V power adapter.
Never operate this product if it has a damaged cord or plug or is not working properly.
When disconnecting the dryer, pull on the plug and not the wire.
CAUTION: Do not look into or touch the UV-C light.
The manufacturer cannot be held liable for incorrect use or handling of the dryer.
Operating conditions
The Lexie electronic hearing aid dryer operates at a temperature range of 113°F to 122°F (45°C to 50°C).

6
Items included:
1 x user manual1 x case
1 x Lexie electronic hearing aid dryer
1 x adapter
1 x USB cable
Technical data
Product Size/External: 4.4” x 3.7” x 1.6”
Drying compartment/Internal Size: 3” x 2.4” x 1”
Maximum Power: 5W
Input: 100-240V, AC 50/60Hz
Output: 5V, 1A, DC Adapter
Maximum Drying Time: 4hrs
Temperature: 113°F to 122°F (45°C to 50°C)
Connecters: USB cable - Micro USB

Distributed by hearX USA, Inc.
Illinois, 60115
[phone]
[email protected]
www.lexiehearing.com