Lexmark MS310 Series User manual

Lexmark
MS310/312/315/410/415/510/610
&
MX310/410/510/610
Mono Product Study Guide

THIS PAGE INTENTIONALLY LEFT BLANK

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Revision Information:
4/7/2014 – Three new models added to the printer family. These are the MS312, MS315, and the
MS415. Serviceability is identical to the existing models that were announced in the fall
of 2012. Revision 2.0 of this Study Guide incorporates the new printer information into
the guide.
Edition: April 2014
Revision: 2.0
The following paragraph does not apply to any country where such provisions are inconsistent with local
law: LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore,
this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in later editions. Improvements or
changes in the products or the programs described may be made at any time.
Comments may be addressed to Lexmark International, Inc., Services Training/008-2, 740 West New
Circle Road, Lexington, Kentucky 40550, U.S.A or e-mail at [e-mail]. Lexmark may use
or distribute any of the information you supply in any way it believes appropriate without incurring any
obligation to you.
References in this publication to products, programs, or services do not imply that the manufacturer
intends to make these available in all countries in which it operates. Any reference to a product, program,
or service is not intended to state or imply that only that product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any existing intellectual property
right may be used instead. Evaluation and verification of operation in conjunction with other products,
programs, or services, except those expressly designated by the manufacturer, are the user’s
responsibility.
Lexmark, Lexmark with diamond design, and MarkNet are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries.
PCL® is a registered trademark of the Hewlett-Packard Company.
All other trademarks are the property of their respective owners.
© 2014 Lexmark International, Inc. All rights reserved.
UNITED STATES GOVERNMENT RIGHTS
This software and any accompanying documentation provided under this agreement are commercial
computer software and documentation developed exclusively at private expense.
For Training Purposes Only 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
THIS PAGE INTENTIONALLY LEFT BLANK
For Training Purposes Only 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Table of Contents
LASER PRINTER NAMING CONVENTION...................................................................1
PRODUCT LINEUP ........................................................................................................1
LEXMARK MS31X/MS41X/MS510/MS610 SERIES....................................................................................1
LEXMARK MX310/MX410/MX510/MX610 SERIES ...................................................................................1
TECHNICAL INFORMATION .........................................................................................1
PRINTER SPECIFICATIONS:MS310/312/315/410/415/510/610 .................................................................1
DUTY CYCLE:MS31X/MS41X/MS510/MS610 SERIES..............................................................................1
PRINT SPEED:MS31X/MS41X/MS510/MS610 SERIES.............................................................................1
TIME TO FIRST PRINT (TTFP): MS31X/MS41X/MS510/MS610 SERIES.....................................................1
MEDIA OPTIONS:MS31X/MS41X/MS510/MS610 SERIES.........................................................................1
TECHNICAL INFORMATION .........................................................................................2
SPECIFICATIONS:MX310/MX410/MX510/MX610 ....................................................................................2
DUTY CYCLE:MX310/MX410/MX51X/MX61X..........................................................................................3
PRINT SPEED:MX310/MX410/MX51X/MX61X.........................................................................................3
TIME TO FIRST PRINT (TTFP): MX310/MX410/MX51X/MX61X.................................................................3
SCANNER AND FAX SPECIFICATIONS:MX310/MX410/MX51X/MX61X.......................................................4
ADF SCAN SPEED:MX310/MX410/MX51X/MX61X.................................................................................5
TIME TO FIRST COPY (TTFC): MX310/MX410/MX51X/MX61X.................................................................5
MEDIA OPTIONS:MX310/MX410/MX510/MX610.....................................................................................6
THEORY OF OPERATION.............................................................................................7
ELECTROPHOTOGRAPHIC PROCESS ..........................................................................................................7
EP Process Components Cross-Sectional ......................................................................................8
PAPER TRANSPORT SYSTEM AND ENHANCEMENTS ....................................................................................9
Base Engine Features and Updates................................................................................................9
Paper Transport System Key Components: MS310/MS312/MS315/MS410/MS415....................11
Paper Transport System Key Components: MS510/MS610 and MX310/MX410/MX51x/MX61x.12
Print Engine Paper Path: MS510/MS610 and MX510/MX610 Series ...........................................14
Paper Jam Locations: MS310/MS312/MS315/MS410/MS415......................................................15
Paper Jam Locations: MS510/MS610 Series................................................................................16
Paper Jam Locations: MX310/MX410/MX51x...............................................................................17
For Training Purposes Only 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Paper Jam Locations: MX61x........................................................................................................18
SCANNER SYSTEM:MX310/MX410/MX510/MX610...............................................................................19
ADF Theory of Operation...............................................................................................................19
ADF Key Components: MX310......................................................................................................21
ADF Paper Path: MX310................................................................................................................22
ADF Key Components: MX410/MX51x/MX61x .............................................................................23
ADF Paper Path: MX410/MX51x/MX61x.......................................................................................24
Flatbed Key Components: MX310/MX410/MX51x/MX61x............................................................25
CONTROL PANEL AND MENUS.................................................................................26
MS310D/DN CONTROL PANEL ................................................................................................................26
Buttons and Functions ...................................................................................................................26
Administrative Menu: MS310d/dn..................................................................................................27
Service Menus: MS310..................................................................................................................28
MS312DN AND MS410D/DN CONTROL PANEL.........................................................................................30
Buttons and Functions ...................................................................................................................30
Administrative Menu: MS312dn and MS410d/dn ..........................................................................31
Service Menus: MS410 and MS412 ..............................................................................................32
MS315DN/MS415DN/MS510DN CONTROL PANEL ..................................................................................34
MS610DN CONTROL PANEL ...................................................................................................................34
Buttons and Functions: MS315dn/MS415dn/MS510dn and MS610dn.........................................35
Administrative Menu: MS315dn/MS415dn/MS510dn and MS610dn ............................................36
Service Menus: MS315dn/MS415dn/MS510dn and MS610dn .....................................................37
MS610DE CONTROL PANEL....................................................................................................................40
Buttons and Functions ...................................................................................................................40
Administrative Menu: MS610de.....................................................................................................41
Service Menus: MS610de..............................................................................................................42
MX310DN CONTROL PANEL ...................................................................................................................45
MX410DE/MX510DE/MX511DE CONTROL PANEL...................................................................................45
MX610DE/MX611DE/MX611DHE CONTROL PANEL.................................................................................45
Buttons and Functions: MX310/MX410/MX51x/MX61x.................................................................46
MX310/MX410/MX51x Home Screen Menus................................................................................47
MX61x Home Screen Menus.........................................................................................................48
Administrative Menu: MX310/MX410/MX51x/MX61x....................................................................49
Service Menus: MX310/MX410/MX51x/MX61x.............................................................................50
SUPPLIES ....................................................................................................................53
For Training Purposes Only 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
SUPPLY CHANGES AND KEY UPDATES ....................................................................................................53
SUPPLY LIFE MESSAGING INFORMATION..................................................................................................54
Toner Cartridge Life Messaging.....................................................................................................54
Imaging Unit Life Messaging..........................................................................................................55
Maintenance Kit Life Messaging....................................................................................................56
How to Change Supply Life Messaging Settings...........................................................................57
Adjustable Supplies Alert Options..................................................................................................58
DETECTION OF NON-GENUINE SUPPLIES .................................................................................................59
TONER CARTRIDGES...............................................................................................................................60
MS31x, MS41x, MS510 and MS610 Series...................................................................................60
MX310, MX410, MX51x and MX61x..............................................................................................60
IMAGING UNITS.......................................................................................................................................60
MAINTENANCE ITEMS..............................................................................................................................61
MS510 and MS610 ........................................................................................................................61
MX310, MX410, MX51x and MX61x..............................................................................................61
HARDWARE CHANGES..............................................................................................62
CARTRIDGE SHUTTER/PLUNGER..............................................................................................................62
CUSTOMER INSTALLABLE WIRELESS.......................................................................................................63
ELIMINATED SENSORS ............................................................................................................................63
NEW ESD GROUND POINTS ....................................................................................................................63
NEW SENSORS .......................................................................................................................................64
FIRMWARE AND FUNCTIONALITY CHANGES.........................................................65
ERROR CODE FORMATTING.....................................................................................................................65
Decoding Paper Jam Sub-error Codes <.xx>................................................................................65
AUTO REBOOT –ERROR RECOVERY .......................................................................................................66
Sample Generic Control Panel Messages after Auto Reboot........................................................67
SAFE MODE............................................................................................................................................68
When Should Safe Mode be Enabled?..........................................................................................68
Configuration and Management.....................................................................................................69
Safe Mode Messaging ...................................................................................................................69
Safe Mode Print Behavior..............................................................................................................70
RESTORE POINT .....................................................................................................................................71
COMPLEX PARTS AND PROCEDURES ....................................................................72
PART REMOVAL TIPS..............................................................................................................................72
For Training Purposes Only 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
CONTROL PANEL ..............................................................................................................................73
CONTROLLER BOARD ...................................................................................................................73
PRINTHEAD .............................................................................................................................77
ACM PICK CLUTCH ......................................................................................................................77
ACM ASSEMBLY .....................................................................................................................78
TRAILING EDGE SENSOR .........................................................................................................79
MPF SOLENOID ......................................................................................................................80
MPF SEPARATOR PAD ............................................................................................................81
MIRRORED NVRAM COMPONENTS .........................................................................................................81
Control Panel ............................................................................................................................81
Controller Board ...................................................................................................................81
ZERO INSERTION FORCE (ZIF) CONNECTORS .....................................................................................82
Horizontal Top Contact Connector.................................................................................................82
How to Remove a Cable from the Horizontal Top Contact Connector....................................82
Horizontal Bottom Contact Connector ...........................................................................................84
Vertical Mount Contact Connector.................................................................................................86
How to Insert a Cable into the Vertical Mount Contact Connector..........................................86
Horizontal Sliding Contact Connector............................................................................................87
LOW INSERTION FORCE (LIF) CONNECTOR .........................................................................................89
How to Insert a Cable into the LIF Connector .........................................................................89
OTHER SPECIAL INSTRUCTIONS...............................................................................................................90
Staple Finisher ...............................................................................................................................90
CLEANING THE PRINTER ..........................................................................................................................91
LUBRICATION SPECIFICATION..................................................................................................................91
CLEANING THE MFP DOCUMENT GLASS..................................................................................................92
PRINT QUALITY DIAGNOSTIC TIPS ..........................................................................93
GENERAL TERMINOLOGY ........................................................................................................................93
Know your paper orientation when diagnosing a print quality issue..............................................93
Know the direction of the print when diagnosing a print quality issue. ..........................................93
PRINT QUALITY RULES OF THUMB...........................................................................................................94
PAPER TRANSPORT DIAGNOSTIC TIPS ..................................................................95
PAPER RULES OF THUMB........................................................................................................................95
For Training Purposes Only 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Laser Printer Naming Convention
Beginning in the fall of 2012, Lexmark changed the naming convention of its laser printers based on a 5-
digit identifier. The chart below outlines what each of these codes mean.
M
S
8
1
2
dn
“M” for monochrome laser and “C” for color
“S” for single function and “X” for multifunction
Class: higher the number, greater level of performance and duty cycle
Gen: changes with each generation of product introduced in that class
Model: identifies the specific model within a class and generation
Suffix Convention
n
Network
d
Duplex
e
eTask
h
Hard Drive
x
High Capacity Input Tray
f
Finisher
m
Mailbox
t
Tray
p
Hole Punch
For Training Purposes Only 1 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Product Lineup
Lexmark MS31x/MS41x/MS510/MS610 Series
Model Name Machine Type –
Model Number Network Duplex Control Panel Solutions Enabled
MS310d 4514-220 N Y LED N
MS310dn 4514-230 Y Y N
MS312dn 4514-330 Y Y 2-Line APA
Mono LED
N
MS410d 4514-420 N Y N
MS410dn 4514-430 Y Y N
MS315dn 4514-335 Y Y
2.4” Color LCD
N
MS415dn 4514-530 Y Y N
MS510dn 4514-630 Y Y N
MS610dn/dtn 4514-635 Y Y N
MS610de/dte 4514-646 Y Y 4.3” Color Touch Y
Lexmark MX310/MX410/MX510/MX610 Series
Model Name Machine Type –
Model Number Network Duplex Control Panel Solutions Capable
MX310dn 7015-270 Y Y 2.4” Color LCD N
MX410de 7015-470 Y Y
4.3” Color Touch
Y
MX510de 7015-630 Y Y Y
MX511de/dte 7015-670 Y Y Y
MX511dhe 7015-675 Y Y Y
MX610de 7016-630 Y Y
7” Color Touch
Y
MX611de/dte 7016-670 Y Y Y
MX611dhe 7016-675 Y Y Y
For Training Purposes Only 1 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Technical Information
Printer Specifications: MS310/312/315/410/415/510/610
MS310d/dn
MS312dn
MS315dn MS410d/dn MS415dn
MS510dn
MS610dn
MS610de
Performance
Fuser
Technology
Belt Fuser
Processor 6170 (Dual Core 800 MHz)
Memory
Standard
Memory 1128MB 256MB 128MB (d)
256MB (dn) 256MB 256MB 512MB
Max Memory 128MB 256MB 128MB (d)
256MB (dn) 256MB 1280MB 2.5GB
Memory
Options None 512MB,
1GB (x16) None 512MB,
1GB (x16) 1GB, 2GB (x32)
Optional Flash
Memory 256MB
Hard Drive None Optional
240GB+
Connectivity
Connectivity –
Standard
USB, 10/100
Ethernet,
Parallel
USB-B 2.0 (Rear), Gigabit Ethernet
(Additional Parallel Port option for
MS415 only)
USB-A 2.0 (Front), USB-B
2.0 (Rear), USB-A 2.0
(Rear for MS610de only),
Gigabit Ethernet
For Training Purposes Only 1 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
MS310d/dn MS312dn
MS315dn
MS410d/dn MS415dn MS510dn
MS610dn
MS610de
Connectivity –
Optional
802.11x
Wireless
(Swiss) –
MS310dn
only
802.11x
Wireless
Parallel
(SPR only);
802.11x
Wireless
(Swiss) –
MS410dn
only
802.11x
Wireless
Parallel
(SPR only);
802.11x
Wireless
(Swiss)
Parallel,
Serial, Fiber
via ISP Pod;
802.11x
Wireless
(Swiss)
USB Host None
Front USB-
A 2.0 Host
(low, full,
high) –
MS610dn
only
Front USB-A
2.0 Host
(low, full,
high);
Rear USB-A
Host
(low, full,
high)
Option Slots
ISP Slots None Yes
1
The standard memory is embedded into the controller board.
For Training Purposes Only 2 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Duty Cycle: MS31x/MS41x/MS510/MS610 Series
Printer Model
Recommended Monthly
Page Volume
1
Max Monthly Duty Cycle2
MS310 500 to 2,500 pages 50,000 pages
MS312 500 to 2,500 pages 50,000 pages
MS315 500 to 4,000 pages 60,000 pages
MS410 750 to 7,200 pages 80,000 pages
MS415 750 to 7,200 pages 80,000 pages
MS510 1,500 to 14,000 pages 80,000 pages
MS610dn 3,000 to 16,000 pages 100,000 pages
MS610de 3,000 to 16,000 pages 150,000 pages
¹ Recommended Monthly Page Volume is a range of pages that helps customers evaluate Lexmark’s
product offerings based on the average number of pages customers plan to print on the device each
month. Lexmark recommends that the number of pages per month be within the stated range for
optimum device performance, based on factors including: supplies replacement intervals, paper loading
intervals, speed, and typical customer usage.
² Maximum Monthly Duty Cycle is defined as the maximum number of pages a device could deliver in
a month using a multi-shift operation. This metric provides a comparison of robustness in relation to
other Lexmark printers and MFPs.
For Training Purposes Only 1 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Print Speed: MS31x/MS41x/MS510/MS610 Series
Media Size
Printer Models
MS310
MS312
MS315
MS410
MS415
MS510
MS610dn
MS610de
Letter, Tray 1 (PPM) 35 37 40 45 50
A4, Tray 1 (PPM)
33 35 38 42 47
Notes: The Claim Values above specifies the maximum throughput, in Pages Per Minute (PPM),
based on resolution and media size. For media sizes smaller than A4 and Letter, throughput is reduced
to protect the printer from thermal damage. Speed values can be up to and as fast as the rated speeds
above.
Time to First Print (TTFP): MS31x/MS41x/MS510/MS610
Series
Printer Mode
Printer Models
MS310
MS312
MS315 MS410 MS415
MS510
MS610dn
MS610de
Time from Ready Mode (sec) 6.5 6.5 6.5 6.5 6.5
Time from Sleep Mode (sec) 9.0 9.5 9.0 9.5 9.0
Notes: Time To First Page (TTFP) is defined to be the time from the moment when the host sends the
print signal until the moment the trailing edge of the first letter page leaves the exit feed rollers. TTFP
is measured using a moderate-coverage text page.
Time to First Page, as fast as rated times above.
For Training Purposes Only 1 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Media Options: MS31x/MS41x/MS510/MS610 Series
Options
250-Sheet Tray
550-Sheet Tray
Swivel Cabinet
Adjustable Printer Stand
Notes:
•Only the above paper handling options are compatible with MS310, MS410, MS510, and MS610
Series printers. Paper handling options for other current printers and legacy printers are not
supported on MS310, MS410, MS510, and MS610 Series printers.
•The Lexmark MS310, MS410, MS510, and MS610 Series do no support output options.
The authoritative tables of maximum Printer Paper Options/Furniture combinations are publicly available
at www.lexmark.com/multifunctionprinters. Please refer to this information when purchasing additional
paper input options for any of the MS310/MS410/MS510/MS610Series printers.
For Training Purposes Only 1 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Technical Information
Specifications: MX310/MX410/MX510/MX610
MX310 MX410 MX510 MX511 MX610 MX611
Performance
Fuser Technology Belt Fuser
Processor 6170 (Dual Core 800 MHz)
Memory
Standard Memory 1 256MB 512MB 1GB
Max Memory 256MB 2.5GB 3GB
Memory Options None 1024MB or 2048MB
Hard Drive None
Standard 120GB
(MX511dhe);
Optional 120GB
(MX510de & MX511de)
Standard 120GB
(MX611dhe);
Optional 120GB
(MX610de,MX611de)
Connectivity
Connectivity – Standard USB-B 2.0 high speed,10/100/1000 Base TX, 10/100 Base TX
Connectivity – Optional Wireless (Swiss) Wireless (Brie),
RS-232 serial,
1284-B parallel
Wireless (Brie),
RS-232 serial,
1284-B parallel
USB Host – Front None USB-A 2.0 High Speed
USB Host – Rear USB-B 2.0 High-speed
Option Slots
DRAMM DIMM Slots None 1 Slot
ISP Slots 1 Slot
eMMC Slots 1 Slot
1The standard memory is embedded into the controller board.
For Training Purposes Only 2 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Duty Cycle: MX310/MX410/MX51x/MX61x
Printer Model
Recommended Monthly
Page Volume
1
Max Monthly Duty Cycle2
MX310dn 250 - 6,000 pages 50,000 pages
MX410de 750 - 10,000 pages 80,000 pages
MX51x 2,000 - 12,000 pages 100,000 pages
MX61x 2,000 - 15,000 pages 150,000 pages
¹ Recommended Monthly Page Volume is a range of pages that helps customers evaluate Lexmark’s
product offerings based on the average number of pages customers plan to print on the device each
month. Lexmark recommends that the number of pages per month be within the stated range for
optimum device performance, based on factors including: supplies replacement intervals, paper loading
intervals, speed, and typical customer usage.
² Maximum Monthly Duty Cycle is defined as the maximum number of pages a device could deliver in
a month using a multi-shift operation. This metric provides a comparison of robustness in relation to
other Lexmark printers and MFPs.
Print Speed: MX310/MX410/MX51x/MX61x
Media Size
Printer Models
MX310dn
MX410de
MX51x
MX61x
Letter, Tray 1 (PPM) 35 40 45 50
A4, Tray 1 (PPM)
33 38 42 47
Notes: The Claim Values above specifies the maximum throughput, in Pages Per Minute (PPM),
based on resolution and media size. For media sizes smaller than A4 and Letter, throughput is reduced
to protect the printer from thermal damage. Speed values can be up to and as fast as the rated speeds
above.
Time to First Print (TTFP): MX310/MX410/MX51x/MX61x
Printer Mode
Printer Models
MX310
MX410
MX51x
MS61x
Time from Ready Mode (sec) 6.5 6.5 6.5 6.5
Time from Sleep Mode (sec) 9.0 9.0 9.0 9.0
Notes: Time To First Page (TTFP) is defined to be the time from the moment when the host sends the
print signal until the moment the trailing edge of the first letter page leaves the exit feed rollers. TTFP
is measured using a moderate-coverage text page.
Time to First Page, as fast as rated times above.
For Training Purposes Only 3 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Scanner and Fax Specifications: MX310/MX410/MX51x/MX61x
Scanner
Scanner Type Color/Mono Flatbed Scanner with ADF
Scan Technology MX310, MX410, MX51x: CIS
MX61x: CCD
Light Source LED
ADF Scanner
Type C-path
Duplex Yes (no duplex scanning on the MX310)
Document Input & Output
Capacity
50 Sheets, 20 lb. (75 g/m2) Bond
Scanner Media Weight Max: 32lb (120g/m2)
Min: 14lb (52g/m2)
Scan Area Max: Legal 8.5” x 14.0” (216mm x 356mm) SEF
Min: A6 4.13” x 5.83” (105mm x 148mm) SEF
Maximum Resolution Mono: 600 x 600 dpi
Color: 600 x 600 dpi
Flatbed Scanner
Scan Area MX310/MX410: Max. Letter/A4 (216mm x 297mm) MX51x:Max. Legal 8.5” x 14” (216mm x 356mm)
MX61x:Max. Legal 8.5” x 14” (216mm x 356mm)
Max Optical Resolution Mono: 1200 dpi
Color: 600 dpi
Max Resolution Mono: 1200 x 600 dpi
Color: 600 x 600 dpi
Fax
Modem Built-in Group 3 compatible, Full Function Fax 33,600bps, Max V.34
Half Duplex
For Training Purposes Only 4 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
ADF Scan Speed: MX310/MX410/MX51x/MX61x
Media Size MX310dn MX410de MX510de, MX511dhe MX610de, MX611de,
MX611dhe
Simplex
(SPM) Duplex (SPM) Simplex (SPM) Duplex (SPM) Simplex (SPM) Duplex (SPM) Simplex (SPM) Duplex (SPM)
Letter 39 N/A 43 19 43 19 47 21
A4 39 N/A 41 18 41 18 45 20
Note: Scan Performance is measured using the 150dpi 8-bit for mono and 150dpi 24-bit for color.
Time to First Copy (TTFC): MX310/MX410/MX51x/MX61x
MX310 MX410 MX51x MX61x
Input Mode Size Copy Start State Copy Time Copy Time Copy Time Copy Time
(in seconds) (in seconds) (in seconds) (in seconds)
ADF Text/Photo Letter StandBy/Ready 6.8 6.5 6.5 6.5
Flatbed Any Letter StandBy/Ready 6.5 6.5 6.5 6.5
ADF Text/Photo A4 StandBy/Ready 7.2 7.0 7.0 6.5
Flatbed Any A4 StandBy/Ready 6.5 8.1 8.1 6.5
NOTE: Time To First Copy, regardless of using the Flatbed or the ADF, is the amount of time from pressing the copy button until
the printed copy sheet lands in the output bin.
For Training Purposes Only 5 4/21/2014

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide Rev 1.3
Media Options: MX310/MX410/MX510/MX610
Options
250-Sheet Tray
550-Sheet Tray
Stapler Option
* Available for the MX61x models only.
Swivel Cabinet
Adjustable Printer Stand
Note: Other than the furniture options above, no previous stands or carts are approved for use with the
MX310, MX410, MX510 and MX610 Series MFPs only.
The authoritative tables of maximum Printer Paper Options/Furniture combinations are publicly available
at www.lexmark.com/multifunctionprinters. Please refer to this information when purchasing additional
paper input options for any of the MX310/MX410/MX510/MX610Series printers.
For Training Purposes Only 6 4/21/2014