Lexmark X84 User manual

www.lexmark.com
Safety, help, questions...
Do not connect the USB cable yet.
Wait for text to appear on the display.
Note: If text does not appear, disconnect, and then
reconnect the power supply.
2
Raise the paper support and extend the paper exit tray.
Connect the power supply.Unlock the scanner.Remove the card.
Load paper and adjust the paper guide.
1
X84-X85 Scan/Print/Copy

© Copyright 2002 Lexmark International, Inc. All rights reserved.
P/N 10K0620 EC 10K034
Press and then press Select to choose cartridge
type, (old or new), and either Standard or High Yield.
or Wait for the alignment page to print. Press and then press
Select to enter alignment values. or
Open the cartridge door. Remove the tape. Insert the print cartridges, and then snap them into place. Close the cartridge door.
Insert CD 1.
Snap
Snap
Windows users: Click Next, Next, Next.
Macintosh: Connect the USB cable, and then click
Install and Agree.
Windows: Click Install Now.Windows users: Wait until prompted by the
CD software to connect the USB cable.
1
2
Important: If installation does not continue after connecting the USB cable,
disconnect, and then reconnect both the USB cable and the power supply.