LG 55EH5C Quick start guide
2
ENGENGLISH
22
16
22
16
R
R
R
R
22
16
22
16
AAA
FRONT
FRONT
(M4 x L8)
(M3 x L4.5)
(M3 x L4.5)
(Φ3 x L6) (Φ3 x L10) (M4 x L10)
3
ENGENGLISH
You can download the web manuals for this product at the following websites.
(Keyword: EH5C)
•www.lg.com/id-manual
SuperSign: http://partner.lge.com
4
ENGENGLISH
Network
5
ENGENGLISH
Network
6
ENGENGLISH
1 Open the product box, then remove the packaging materials and the T-con box in the order they appear.
1
2
T-con box
2 Connect the cables to the Signage box. Here, the HDMI cable with the FRONT label is attached to the top, and the
HDMI cable without the FRONT label is attached to the bottom.
In the case of 16/22 pin cables, connect the cable with the red mark to the upper part. Connect the 16/22 pin
cable with the longer neck to the display set.
16
16
22
22
FRONT
R
R
7
ENGENGLISH
3 Attach the 16/22 pin cables using the 2 screws (M3 x L4.5).
22
16
22
16
4 If installing onto a ceiling or wall, attach the mounting brackets to the Signage box using four screws (M4 x L8).
5 Position the jack cover to fit the cables to the cut spaces and then attach it using the 2 screws (M3 x L4.5).
1
2
8
ENGENGLISH
6 Fold the connectors on the opposite side of the 16/22 pin cables to make them parallel to the cable.
22
16
16
22
22
16
16
22
7 Insert the connectors of the 16/22 pin cables into the tubes.
16
22
16
22
8 Pass the cables through the hole in the middle of the SET.
FRONT
FRONT
9
ENGENGLISH
9 Connect the HDMI cable with the label marked ‘FRONT’ to the FRONT side. Insert the 16/22 pin cable with the red
mark to the cable holder and connect it using a screw (M3 x L4.5).
22
FRONT
16
RR
22
FRONT
16
RR
10
Connect the HDMI cable (without the label marked ‘FRONT’) to the REAR side. Insert the 16/22 pin cable (without
the red mark) to the cable holder and connect it using a screw (M3 x L4.5).
16
22
16
22
11
When installing the product to a stand (excluding a ceiling mount or a wall mount), remove the 2 screws, change
the direction of the LG logo, and then reassemble it.
10
ENGENGLISH
12
Cover the FRONT side with the T-con box cover (with the IR receiver) and attach it using 4 screws (Φ3 x L6) on
the opposite side.
16
22
16
22
13
Cover the REAR side with the other T-con box cover and attach it using 2 screws (Φ3 x L10).
11
ENGENGLISH
14
Attach the bottom part of the T-con cover using 6 screws (M4 x L10).
Connect the power cable to the Signage box.
1
2
12
ENGENGLISH
1 2
34
13
ENGENGLISH
Temporary noise is normal when powering ON or OFF this
device.
Make sure to read the Safety Precautions before using
the product.
The model and serial numbers of the SET are located on
the back and one side of the SET. Record it below should
you ever need service.
MODEL
SERIAL
2
KAZҚАЗАҚША
22
16
22
16
R
R
R
R
22
16
22
16
AAA
FRONT
FRONT
(M4 x L8)
(M3 x L4,5)
(M3 x L4,5)
(Φ3 x L6) (Φ3 x L10) (M4 x L10)
3
KAZҚАЗАҚША
Бұл өнімге арналған Интернеттегі нұсқауларды төмендегі веб-сайттардан жүктеп
алуға болады.
(Кілт сөз: EH5C)
• www.lg.com/id-manual
SuperSign: http://partner.lge.com
4
KAZҚАЗАҚША
Network
5
KAZҚАЗАҚША
Network
6
KAZҚАЗАҚША
1 Өнім қорабын ашыңыз, одан кейін олар көрінетін тәртіпте орама материалдарын және Т
тығыздағыш қорабын алып тастаңыз.
1
2
T тығыздағыш
қорабы
2 Кабельдерді тарату қорабына жалғаңыз. Бұл жерде FRONT белгісі бар HDMI кабелі үстіңгі жағына,
ал FRONT белгісі жоқ HDMI кабелі астыңғы жағына жалғанады.
16/22 істікшелі кабельдер болса, қызыл таңбалы кабельді жоғарғы бөлігіне жалғаңыз. Мойны
ұзынырақ 16/22 істікшелі кабельді дисплей жинағына жалғаңыз.
16
16
22
22
FRONT
R
R
Other manuals for 55EH5C
4
This manual suits for next models
1
Table of contents
Languages:
Other LG Digital Signage manuals
Popular Digital Signage manuals by other brands
SunBriteTV
SunBriteTV DS-4720L Operator's manual
displayit
displayit Flare Assembly instructions
VISIONARY DESIGNS
VISIONARY DESIGNS MOD-1368M Setup instructions
Dahua Technology
Dahua Technology DH-LDH Series user manual
Matrix Orbital
Matrix Orbital PK162-12 Technical manual
Nexcom
Nexcom NDiS 162 user manual
