LG DP546 User manual

Please read this manual carefully before operating
your set and retain it for future reference.
DP546
OWNER’S MANUAL
DVD Player

1 Getting Started
Getting Started
2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.

Getting Started
3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
Notes on Copyrights
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, DVDs, CDs and other
materials may subject you to civil and/or criminal
liability.

Getting Started
4
Getting Started
1
Notes on Discs
yDo not touch the playback side of the disc. Hold
the disc by the edges so that ngerprints do not
get on the surface. Never stick paper or tape on
the disc.
yAfter playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Notes on the Unit
yPlease save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
yTo clean the unit, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the
surface of the unit.
yThe unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest
authorized service center.

Table of Contents
5
1
2
3
4
5
6
Table of Contents
1 Getting Started
2 Safety Information
6 Introduction
6 – About the “7” Symbol Display
6 – Symbols Used in this Manual
6 – Supplied Accessories
6 – Playable Discs
6 – Regional Code
7 – File Compatibility
8 Remote Control
9 Front Panel
9 Rear Panel
2 Connecting
10 Connecting to your TV
10 – Connecting Video / Audio Cable
10 – Connecting Component Video Cable
10 Connecting to an Amplifier
10 – Connecting Audio Cable
11 – Connecting COAXIAL (digital audio)
Cable
11 – Connecting 5.1 CH Audio Cables
3 System Setting
12 Settings
12 – Adjust the Setup Settings
12 – [LANGUAGE] Menu
12 – [DISPLAY] Menu
13 – [AUDIO] Menu
14 – [LOCK] Menu
14 – [OTHERS] Menu
4 Operating
15 General Playback
15 – Playing a Disc
15 – Playing a File
15 – On-Screen Display
16 – General Operation
16 Advanced Playback
16 – Movie
17 – Music
18 – Photo
5 Troubleshooting
19 Troubleshooting
6 Appendix
20 Area Code List
21 Language Code List
22 Specifications
22 Trademarks and Licenses

Getting Started
6
Getting Started
1
Introduction
About the “7” Symbol Display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specic media.
Symbols Used in this Manual
A section whose title has one of the following
symbols are applicable only to the disc or le
represented by the symbol.
rDVD-Video, DVD±R/RW
tAudio CDs
yVideo les contained in the
USB/Disc
uAudio les contained in the
USB/Disc
iPhoto les contained in the
USB/Disc
Supplied Accessories
RCA Video/Audio cable
(1)
Remote control (1)
Battery (1)
Playable Discs
DVD-VIDEO
Discs such as movies that can be
purchased or rented.
DVD±R
-Video mode and nalized only
-Supports the dual layer disc also
-DVD±R discs that contain Video,
Audio or Photo les.
DVD-RW
-VR mode, Video mode and
nalized only
-DVD-RW discs that contain Video,
Audio or Photo les.
DVD+RW
-Video mode and nalized only
-DVD+RW discs that contain Video,
Audio or Photo les.
Audio CD
CD-R/RW
-CD-R/RW discs that contain audio
titles, Video, Audio or Photo les.
You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the players when formatting
rewritable discs. When setting the option
to Live System, you cannot use it on player.
(Mastered/Live File System: Disc format system
for windows Vista)
, Note
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled
same as the rear of the unit or “ALL”.

Getting Started
7
Getting Started
1
File Compatibility
Overall
Available File extensions: “.avi”, “.mpg”, ”.mpeg”,
“.mp3”, “.wma”, “.jpg”, “.jpeg”, “.divx”
yThe le name is limited to 20 characters.
yDepending on the size and number of the les,
it may take several minutes to read the contents
on the media.
Maximum Files/Folder: Less than 600 (total
number of les and folders)
CD-R/RW, DVD±R/RW Format: ISO 9660+JOLIET
Video Files
Available resolution size: 720 x 576 (W x H) pixels
Playable subtitle: SubRip (.srt/.txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/
.txt), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
Playable Codec format:
“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”,
“DIVX6.xx”(Standard playback only),
“MP43”, “3IVX”
Playable Audio format: “Dolby Digital”, ”PCM”,
“MP3”, “WMA”
Sampling frequency: within 8 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
Bit rate (MP3/WMA/DivX): within 8 to 320 kbps
(MP3), within 32 to 192 kbps (WMA), less than 4
Mbps (DivX)
This unit does not support les that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX have.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
, Note
Audio Files
Sampling frequency: within 8 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
Bit rate: within 8 to 320 kbps (MP3), within 32 to
192 kbps (WMA)
Photo Files
Photo size: Less than 2M recommended.
yProgressive and lossless compression photo
image les are not supported.
Notes of USB Device
yThis unit supports USB device with FAT16 or
FAT32 format.
yDo not extract the USB device during operation
(play, etc.).
yA USB device which requires additional program
installation when you have connected it to a
computer, is not supported.
yUSB device: USB device that supports USB1.1
and USB2.0.
yMovie, music and photo les can be played. For
details of operations on each le, refer to relevant
pages.
yRegular back up is recommended to prevent
data loss.
yIf you use a USB extension cable, USB HUB, USB
Multi-reader, or External HDD, the USB device
may not be recognized.
ySome USB device may not work with this unit.
yDigital camera and mobile phone are not
supported.
yUSB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.

Getting Started
8
Getting Started
1
?
• • • • • • • • • • a • • • • • • • • • •
POWER (1): Switches the unit ON or OFF.
OPEN/CLOSE (B): Opens and closes the disc tray.
Numerical buttons: Selects numbered items in a
menu.
CLEAR: Removes a track number on the Program
List.
PROGRAM: Enters the program edit mode.
• • • • • • • • • • b • • • • • • • • • •
SCAN (c/v): Searches backward or forward.
SKIP (C/V): Goes to the next or previous
chapter / track / le.
PAUSE/STEP (M): Pauses playback.
PLAY (z): Starts playback.
STOP (Z): Stops playback.
• • • • • • • • • • c • • • • • • • • • •
DVD MENU: Accesses or exits the DVD menu.
TITLE: Accesses the disc’s title menu, if available.
w/s/a/d:Navigates the menus.
ENTER (b): Conrms menu selection.
DISPLAY: Accesses or exits On-Screen Display.
RETURN (x): Moves backward or exit the menu.
AUDIO ([): Selects an audio language or audio
channel.
SUBTITLE (]): Selects a subtitle language.
ANGLE (}): Selects a DVD camera angle, if
available.
SETUP: Accesses or exits the setup menu.
• • • • • • • • • • d • • • • • • • • • •
A-B: Repeats a section.
REPEAT: Repeats a chapter, track, title or all.
ZOOM: Enlarges video image.
?: This button is unavailable.
Battery Installation
Remove the battery cover on the rear of the Remote
Control, and insert R03 (size AAA) battery with 4
and 5matched correctly.
Remote Control

Getting Started
9
Getting Started
1
Front Panel
  g
aDisc Tray
bDisplay window
cRemote sensor
dR (Open/Close)
eT (Play/Pause)
f1/! (Power)
gUSB Port
Rear Panel
VIDEO
DIGITAL
AUDIO
YP
R
PB
COAXIAL
VIDEO OUT5.1ch AUDIO OUT
AUDIO OUT
REAR LL
RR WOOFER
CENTER FRONT
abcdef
gh
aPower Cord
b5.1 ch AUDIO OUT (REAR L/R)
c5.1 ch AUDIO OUT (CENTER)
dAUDIO OUT (L/R)
5.1 ch AUDIO OUT (FRONT L/R)
eVIDEO OUT
fCOMPONENT VIDEO OUT (Y PBPR)
g5.1 ch AUDIO OUT (WOOFER)
hDIGITAL AUDIO (COAXIAL)

2 Connecting
Connecting
10
Connecting
2
Connecting to your TV
Connecting Video / Audio
Cable
Connect the VIDEO/AUDIO OUT on the unit to
VIDEO/AUDIO IN on TV with Video/Audio cable,
such as VIDEO with yellow, AUDIO Left/Right with
white/ red.
VIDEO
DIGITAL
AUDIO
YP
R
PB
COAXIAL
VIDEO OUT5.1ch AUDIO OUT
AUDIO OUT
REAR LL
RR WOOFER
CENTER FRONT
TV
VIDEO IN
Video/Audio cable
Rear of the Unit
Connecting Component Video
Cable
Connect the COMPONENT VIDEO OUT (Y PBPR)
jacks on the unit to the corresponding input jacks
on the TV using Component video cable, such as Y
with green, Pb with blue, and Pr with red.
VIDEO
DIGITAL
AUDIO
YP
R
PB
COAXIAL
VIDEO OUT5.1ch AUDIO OUT
AUDIO OUT
REAR LL
RR WOOFER
CENTER FRONT
TV
VIDEO IN
Rear of the Unit
Component
Cable
yIf your TV accepts progressive format signals, you
must use this connection and set [Progressive
Scan] to [On] on the setup menu. (See page 12)
yYou should still connect the AUDIO cable
between the unit and TV.
Connecting to an
Amplifier
Connecting Audio Cable
Connect the AUDIO OUT (L/R) on the unit to 2CH
AUDIO IN on amplier with Audio cable, such as
AUDIO Left/Right with white/red.
VIDEO
DIGITAL
AUDIO
YP
R
PB
COAXIAL
VIDEO OUT5.1ch AUDIO OUT
AUDIO OUT
REAR LL
RR WOOFER
CENTER FRONT
Amplier/
Receiver
Audio Cable
Rear of the Unit

Connecting
11
Connecting
2
Connecting COAXIAL (digital
audio) Cable
Connect one of the unit’s DIGITAL AUDIO (COAXIAL)
jacks to the corresponding jack on your amplier.
VIDEO
DIGITAL
AUDIO
YP
R
PB
COAXIAL
VIDEO OUT5.1ch AUDIO OUT
AUDIO OUT
REAR LL
RR WOOFER
CENTER FRONT
OPTICAL
Amplier/
Receiver
Coaxial Cable
Rear of the Unit
yIf your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 kHz] on the setup menu.
yIf your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu.
yIf the audio format of the digital output
does not match the capabilities of your
amplier, the amplier will produce a strong,
distorted sound or no sound at all.
yTo see the audio format of the current disc
in the on-screen display, press AUDIO.
yThis unit does not perform internal (2
channel) decoding of a DTS sound track.
To enjoy DTS multi channel surround, you
must connect this unit to a DTS compatible
amplier via one of this unit’s digital audio
outputs.
, Note
Connecting 5.1 CH Audio
Cables
Connect a amplifer with analog 5.1 channel input
jacks.
ANALOG 5.1CH AUDIO INPUT
FRONT RFRONT L SUBWOOFER
REAR R REAR LCENTER
ER
R
RL
VIDEO
DIGITAL
AUDIO
YP
R
PB
COAXIAL
VIDEO OUT5.1ch AUDIO OUT
AUDIO OUT
REAR LL
RR WOOFER
CENTER FRONT
Receiver /
Amplier
Rear of the Unit
Audio
Cable
Audio
Cable
y5.1 channel digital surround sound via a digital
connection can only be obtained if your amplifer
is equipped with a digital multi channel decoder.
yFor this connection, additional audio cables are
needed.
yMake the appropriate sound setting using
[Speaker Setup] option on the setup menu. (See
page 13)

3 System Setting
System Setting
12
System Setting
3
Settings
When the unit is turned-on at the rst time, you
have to select the desired language. (Optional)
Adjust the Setup Settings
You can change the settings of the unit in the
[Setup] menu.
1. Press SETUP.
2. Use
w/s to select the first setup option, and
press dto move to the second level.
3. Use
w/s to select a second setup option, and
press dto move to the third level.
4. Use
w/s to select a desired setting, and press
ENTER (b) to confirm your selection.
[LANGUAGE] Menu
Menu Language
Select a language for the Setup menu and on-
screen display.
Disc Audio/Disc Subtitle/Disc Menu
Select a language for the Disc Audio/Disc Subtitle/
Disc Menu.
[Original]: Refers to the original language in
which the disc was recorded.
[Other]: To select another language, press
number buttons then ENTER (b) to enter the
corresponding 4-digit number according to
the language code list. (See page 21) If you
make a mistake while entering number, press
CLEAR to delete numbers then correct it.
[O ] (for Disc Subtitle): Turn o Subtitle.
[DISPLAY] Menu
TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]: Select when a standard 4:3 TV is
connected.
[16:9]: Select when a 16:9 wide TV is
connected.
Display Mode
If you selected 4:3, you’ll need to dene how you
would like widescreen programs and lms to be
displayed on your TV screen.
[Letterbox]: This displays a widescreen picture
with black bands at the top and bottom of the
screen.
[Panscan]: This lls the entire 4:3 screen,
cropping the picture as necessary.
Progressive Scan
(For Component Video connection)
Check whether your TV can accept the progressive
signal. If your TV accepts it, you can enjoy accurate
color with high quality by selecting [On].
If you set Progressive Scan to [On] in error, you must
reset the unit. First, remove the disc in the unit.
Next, press and hold STOP (Z) for ve seconds.
The video output will be restored to the standard
setting, and a picture will be visible on your TV.

System Setting
13
System Setting
3
[AUDIO] Menu
Set the player’s Audio options according to various
disc output type you use. (Optional)
Dolby Digital / DTS / MPEG
Select the type of digital audio signal to use the
DIGITAL AUDIO OUT jack.
[Bitstream]: Select to connect DIGITAL AUDIO
OUT jack to an amplier with Dolby Digital, DTS
or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select
to connect DIGITAL AUDIO OUT jack to an
amplier without Dolby Digital or MPEG
decoder.
[O] (for DTS): Select to connect DIGITAL
AUDIO OUT jack to an amplier without DTS
decoder.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48 kHz] and [96 kHz].
Speaker Setup
Selects an option according to the analog audio
connection.
[2 Ch]: Selects when 2 Channel stereo system
is connected to this unit.
[5.1 Ch]: Selects when 5.1 Channel surround
system is connected to this unit
After selecting [5.1 Ch], you can set the 5.1 Ch
speaker setup options. Press w/s to select an
option then press a/d to adjust the setting.
[Speaker]: Select a speaker that you want to
adjust.
[Size]: Select a size of the selected speaker.
(Large, Small) A size cannot be selected
depending on the selected speaker.
[Volume]: Adjust the output level of the
selected speaker. (-10 dB - 0 dB).
[Distance]: Select a distance to each speaker
from the listening position. You cannot adjust
Sub Woofer speakers. (1 m(3.28 ft) - 6.0 m
(19.7 ft))
[Test]: Select [All], a test signal is sent to each
speaker. During testing, you can select a
speaker and adjust volume setting. Select [o ]
to stop the test.
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this eect.
Vocal
Set to [On] only when a multi-channel karaoke DVD
is playing. The karaoke channels on the disc mix
into normal stereo sound.

System Setting
14
System Setting
3
[LOCK] Menu
Firstly, you have to create the 4-digit password on
[Area Code] to use the LOCK menu.
If you forget your password
You can reset it. First, remove the disc in the
unit. Display setup menu then input the 6-digit
number “210499”. The “P CLr”appear in the
display window and the password is deleted.
Rating
Select a rating level. The lower the level, the stricter
the rating. Select [Unlock] to deactivate the rating.
Password
Sets or changes the password for lock settings.
Area Code
To input the standardized area code referring the
Area Code List on page 20.
[OTHERS] Menu
B.L.E (Black Level Expansion)
To select the black level of playback pictures, set
your preference and monitor’s ability.
REC Bitrate
You can choose a bit rate for USB direct recording.
Higher bit rate gives the better sound quality but
uses more space on the USB Flash Drive. For USB
direct recording, see page 17.
DivX(R) VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an ocial DivX Certied®
device that has passed rigorous testing to verify
that it plays DivX video. Visit divx.com for more
information and software tools to convert your les
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certied® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]: Displays the registration code of
your unit.
[Deregister]: Deregister your unit and display
the deregister code.

4 Operating
Operating
15
Operating
4
General Playback
Playing a Disc rt
1. Press OPEN/CLOSE (B), and place a disc on the
disc tray.
2. Press OPEN/CLOSE (B) to close the disc tray
For the most DVD-ROM discs, playback starts
automatically.
For the Audio CD, select a track using w/s/
a/d, and press PLAY (z) or ENTER (b) to
play the track.
Playing a File yui
1. Press OPEN/CLOSE (B) to place a disc on the
disc tray, or connect the USB device.
2. Select a le using w/s/a/d, and press PLAY
(z) or ENTER (b) to play the le.
RETURN (x) Changes between Disc and
USB Device.
TITLE Changes the mode. (Music :
Photo :Movie)
On-Screen Display ry
You can display and adjust various information and
settings about the content.
1. While playback, press DISPLAY to show various
playback information.
2. Select an option using w/s.
3. Use
a/d and numerical button to adjust the
selected option value.
4. Press DISPLAY to exit the On-Screen display.
Current title number/total
number of titles
Current chapter number/total
number of chapters
Elapsed playing time
Selected total time of current
title/le
Selected audio language or
channel
Selected subtitle
Selected angle/total number
of angles

Operating
16
Operating
4
General Operation
To Do this
Playback Press PLAY (z)
Pause Press PAUSE/STEP (M)
Stop Press STOP (Z)
Skip to the next
or previous
Press Cor Vduring
playback
Fast forward or
fast reverse
Press cor vduring
playback.
Resume
playback
Press STOP (Z) during playback
to save the stopped point.
yPress STOP (Z) once:
Displayed MZ on the screen
(Resume Stop)
yPress STOP (Z) twice:
Displayed Zon the screen
(Complete Stop)
System Select You must select the appropriate
system mode for your TV system.
Remove any disc that might
be in the unit, press and hold
PAUSE/STEP (M) for more than
ve seconds to be able to select
a system. (PAL, NTSC)
Screen Saver Leave the unit in Stop mode for
about ve minutes, then the
screen saver appears.
If the Screen Saver is displayed
for ve minutes, the unit auto-
matically turns itself o.
Last Scene
Memory
Turn o the unit, then the unit
memorize the lastly viewed
scene even if disc is inserted
again after removal or unit is
turned on after o with same
disc. (DVD/ Audio CD only)
Volume Control You can control the sound vol-
ume as the AUDIO OUTPUT jack
on the unit is connected. Press
and hold AUDIO([) for 3 sec-
onds during normal playback.
The control bar will appear. Press
a/d to adjust.
The adjusted volume is not
memorized after power-o.
Advanced Playback
Movie ry
To Do this
Display disc
menu
Press DVD MENU. (DVD Only)
Play
repeatedly
Press REPEAT during playback. To
select an option to be repeated,
Press REPEAT repeatedly.
• DVD: Chapter/ Title/ O
• MOVIE: Track/ All/ O
Play frame-by-
frame
Press PAUSE/STEP (M) while
Video le playback and press
PAUSE/STEP (M) repeatedly to
play Frame-by-Frame playback.
Repeat a
specic
portion
Press A-B at the beginning of the
portion you wish to repeat and
again at the end of the portion.
To return to normal playback,
press A-B to select [O ].
Set the desired
starting time of
playback
Searches for the starting point of
entered time code. Press DISPLAY
then select clock icon. Enter a
time then press ENTER (b).
For example, to nd a scene
at 1 hour, 10 minutes, and 20
seconds, enter“11020”and press
ENTER (b).
If you enter the wrong number,
press CLEAR to enter again.
Change the
subtitle code
page
(Video le only)
Press and hold SUBTITLE for 3
seconds during playback. The
language code will appear.
Press aor dto select another
language code until the subtitle
is displayed properly and then
press ENTER (b)
Slow down the
playing speed
(Forward only)
While the playback is paused,
press vrepeatedly to play
various speeds of slow motion.
Press PLAY (z) to continue play
at normal speed.
Watch an
enlarged video
During playback or pause mode,
press ZOOM repeatedly to select
zoom mode.
ZOOM: 100% :200% :300%
:400% :100%
w/s/a/d: Move through the
zoomed picture.

Operating
17
Operating
4
Music tu
To Do this
Play
repeatedly
Press REPEAT during playback.
To select an item to be repeated,
Press REPEAT repeatedly.
yTrack/ ALL/ (REPEAT O)
Create or
delete your
own program
Press the PROGRAM to select
desired le and then, {mark
appears on screen.
Using w/s and ENTER (b)
to add a music le(s) on the
program list,
If you add desired music le(s),
press PROGRAM to end edit
program list.
To clear a music le(s) from the
program list, select the music
le you want to clear then press
CLEAR in program edit mode.
To clear all music le(s) from the
program list, select [Clear All]
then press ENTER (b)in program
edit mode.
Display le
information
(ID3 TAG)
While playing a MP3 le
containing le information, you
can display the information by
pressing DISPLAY repeatedly.
yDepending on the MP3 les,
information may not be
displayed on the screen.
Record the
Audio CD to
USB device
Connect USB Flash Drive to the
unit before recording.
Insert an Audio CD, and then
select a track using w/s, DVD
MENU, or numerical buttons.
yFor track recording: Press
AUDIO([) in play, pause or
resume stop mode.
yFor all track recording: Press
AUDIO([) in complete stop
mode.
yFor program list recording: In
stop mode, press AUDIO([)
after selecting a track on the
program list.
yIf you use this function, the “CD_REC” folder
will be created automatically in the USB
Flash Drive then the music le(s) is saved in
it.
yIf you remove USB Flash Drive, turn o or
open the unit while recording, it can make a
malfunction.
yIf the remaining space on the USB Flash
Drive is insucient, the recording is not
available. To increase the free space, delete
les in it using your PC.
yCD-G disc and Audio CDs encoded in DTS
cannot be recorded.
yExternal HDD, Multi Card reader, Multi
Partition USB, Locked device and MP3 player
are not supported.
yYou can set the recording speed pressing
AUDIO during USB direct recording.
-X1 Track: While normal speed recording,
you can listen to the music.
-X4 Track: While 4X speed recording,
you can not listen to the music.
yRecording format: MP3 le
yEncoding Bit rate: 128 Kbps / 160 Kbps / 192
Kbps / 256 Kbps / 320 Kbps
, Note
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal oense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights

Operating
18
Operating
4
Photo i
To Do this
View photo
les as a slide
show
Use w/s/a/d to highlight
(`) icon then press ENTER (b)
to start slide show.
Adjust slide
show speed
You can change slide show
speed using a/d when (J)
icon is highlighted.
Rotate a photo Use w/s to rotate the photo in
full screen counterclockwise or
clockwise while viewing a photo
in full screen.
Watch an
enlarged Photo
While viewing a photo in full
screen, press ZOOM repeatedly
to select zoom mode.
ZOOM: 100% :200% :300%
:400% :100%
w/s/a/d: Move through the
zoomed photo.
Listen to music
during slide
show
You can listen to music during
slide show, if the disc contain
music and photo les together.
Use w/s/a/d to highlight
(~) icon then press ENTER (b)
to start slide show.

5 Troubleshooting
Troubleshooting
19
Troubleshooting
5
Troubleshooting
Issue Cause Solution
No power The power cord is disconnected. Plug the power cord into the wall outlet
securely.
The power is on, but
the unit does not work.
No disc is inserted. Insert a disc.
The unit does not start
playback.
An unplayable disc is inserted. Insert a playable disc. (Check the disc type
and regional code.)
The rating level is set. Change the rating level.
The remote control
does not work properly.
The remote control is not
pointed at the remote sensor
on the unit.
Point the remote control at the remote
sensor of the unit.
The remote control is too far
from the unit.
Operate the remote control closer to the unit.
Poor picture quality
and sound distortion
Fingerprints and dust are
stained on the disc.
Wipe the disc from the center to out with
a clean cloth. Do not use strong solvents.
(alcohol, benzine, thinner, commercially
available cleaners)
No picture The TV is not set to receive the
signal from the unit.
Select the appropriate video input mode on
the TV.
The video cable is not
connected securely.
Connect the video cable securely.
No sound The equipment connected with
the audio cable is not set to
receive the signal from the unit.
Select the correct input mode of the audio
amplier.
The AUDIO options are set to
the wrong position.
Set the AUDIO settings to the correct
position.

6 Appendix
Appendix
20
Appendix
6
Area Code List
Choose an area code from this list.
Area Code Area Code Area Code Area Code
Afghanistan AF
Argentina AR
Australia AU
Austria AT
Belgium BE
Bhutan BT
Bolivia BO
Brazil BR
Cambodia KH
Canada CA
Chile CL
China CN
Colombia CO
Congo CG
Costa Rica CR
Croatia HR
Czech Republic CZ
Denmark DK
Ecuador EC
Egypt EG
El Salvador SV
Ethiopia ET
Fiji FJ
Finland FI
France FR
Germany DE
Great Britain GB
Greece GR
Greenland GL
Hong Kong HK
Hungary HU
India IN
Indonesia ID
Israel IL
Italy IT
Jamaica JM
Japan JP
Kenya KE
Kuwait KW
Libya LY
Luxembourg LU
Malaysia MY
Maldives MV
Mexico MX
Monaco MC
Mongolia MN
Morocco MA
Nepal NP
Netherlands NL
Antilles AN
New Zealand NZ
Nigeria NG
Norway NO
Oman OM
Pakistan PK
Panama PA
Paraguay PY
Philippines PH
Poland PL
Portugal PT
Romania RO
Russian
Federation RU
Saudi Arabia SA
Senegal SN
Singapore SG
Slovak Republic SK
Slovenia SI
South Africa ZA
South Korea KR
Spain ES
Sri Lanka LK
Sweden SE
Switzerland CH
Taiwan TW
Thailand TH
Turkey TR
Uganda UG
Ukraine UA
United States US
Uruguay UY
Uzbekistan UZ
Vietnam VN
Zimbabwe ZW