LG 22LS2100-TA User manual
User’s Guide Specication Creator Adviser Approver
In charger
DD/MM/YY
Woo Mi-ra
12/07/12
Shin Hye-jung
12/07/12
Kim Jong-ok
12/07/12
1. Model Description
2. Printing Specication
3. Special Instructions
4. Changes
Model 22LS2100-TA Brand LG Part number
Sufx MP(TR) Product name 22LS2100 MFL67605611
1. Trim Size (Format) : 170 mm x 240 mm (tolerance +/- 5 mm)
2. Printing Colors
Cover : 1 COLOR (BLACK)
Inside : 1 COLOR (BLACK)
3. Stock (Paper): MAPLITHO Grade below tolerance for GSM is 5 g/m2
Cover : Uncoated paper , 백상지 80 g/m2
Inside : Uncoated paper , 백상지 80 g/m2
4. Printing Method : Off-set
5. Bindery : Saddle Stitch
6. Language : ENG (1)
7. Number of pages : 56
N
O
T
E
S
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specication.
(1)Eco-hazardous substances test report should be submitted
when Part certication test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
(1) Origin Notication
* LGEIN : Printed in Indonesia * LGEWA : Printed in U.K.
* LGESP : Printed in Brazil * LGEMX : Printed in Mexico
* LGEND : Printed in China * LGEIL : Printed in India
* LGEMA : Printed in Poland
Rev.
No. DD/MM/YY Creator ECO Number Change description
1
2
3
4
5
6
7
8
9
10
11
Pagination sheet Total pages : 52 pages
Front
Cover
(ENG)
P/No. 2 ... ... ... 50 Blank
Back
Cover
(ENG)
www.lg.com
OWNER’S MANUAL
LED LCD TV
22LS2100
Please read this manual carefully before operating the
your TV and retain it for future reference.
P/NO: MFL67605611 (1207_REV00)
,62/$725*8,'(1
127(y$QWHQQD,VRODWRU,QVWDOODWLRQ*XLGH
ANTENNA/
CABLE IN
&DEOH$QWHQQD:DOO,VRODWRU&RQQHFWWR79&RQQHFWWR6HW7RSER[RU&RQQHFWRQHHQGRIWKHLVRODWRUWRFDEOHDQWHQQDMDFNDQGWKHRWKHUWR79VHWRUVHWWRSER[Isolator Usage (Safety Caution)
"Equipment connected to the protective earthing of mains connection of the building, or through other
protective earthing to a cable distribution system using coaxial cable, may create fire hazard in some
circumstances. Connection to a cable distribution system has therefore to be provided through a device
providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)"
y127(1. Always use isolator with RF signal port (In wall RF port or in set RF Port).
2. Isolator will protect if there is any voltage difference between GND of power Board and
GND of Antenna Signal, the Antenna contact might be heated and excessive heat might
cause an accident, therefore Isolator installation is highly recommended.
3. Avoid disconnecting the antenna isolator after installation.
4. When applying RF isolator, a slight loss of signal sensitivity can occur.
5. You can improve safety of TV by efficiently removing power voltage from TV
antenna.
y$QWHQQD,VRODWRU,QVWDOODWLRQ0HWKRG*Above Pictures may differ from the actual.
y,VRODWRU&RQQHFWLRQ0HWKRG
ENG(1*/,6+
2
ENGLISH
2TABLE OF CONTENTS
TABLE OF CONTENTS
3 LICENSES
4 SAFETY INSTRUCTIONS
10 INSTALLATION PROCEDURE
11 ASSEMBLING AND PREPARING
18 REMOTE CONTROL
19 WATCHING TV
25 CONNECTING TO A PC
28 ENTERTAINMENT
32 CUSTOMIZING SETTINGS
39 MAKING CONNECTIONS
42 TELETEXT
1 ISOLATOR GUIDE
3
ENGLISH
3
TABLE OF CONTENTS / LICENSES 3
WARNING
CAUTION
NOTE
LICENSES
44 MAINTENANCE
45 TROUBLESHOOTING
48 ENVIRONMENTAL INFORMAION
49 SPECIFICATIONS
4
ENG
ENGLISH
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yDo not place the TV and remote control in the following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
- Near any heat source such as stoves and other devices that produce heat
- Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
yDo not place the product where it might be exposed to dust.
This may cause a fire hazard.
yMains plug is the disconnecting device. The plug must remain readily operable.
yDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
yMake sure to connect the power cable to the grounded current. (Except for devices
which are not grounded.)
You may be electrocuted or injured.
yFix the power cable completely.
If the power cable is not fixed completely, a fire can break out.
yEnsure the power cord does not come into contact with hot objects such as a
heater.
This may cause a fire or an electric shock hazard.
yDo not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
yBend antenna cable between inside and outside building to prevent rain from
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
yWhen mounting a TV on the wall, make sure not to install TV by hanging power
and signal cables on the back of the TV.
It may cause fire, electric shock.
5
ENGENGLISH
SAFETY INSTRUCTIONS
yDo not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
yDo not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.
Desiccant
yKeep the packing anti-moisture material or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
yDo not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
yDispose of used batteries carefully to protect a child from eating them.
In case if they eat it, take them to consult a doctor immediately.
yDo not insert a conductor (like a metal chopstick) into one end of the power cable
while the other end is connected to the input terminal on the wall. Additionally, do
not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted.(Depending on model)
yDo not put or store inflammable substances near the product.
There is a danger of explosion or fire due to careless handling of the inflammable
substances.
yDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
yDo not spray water on the product or scrub with an inflammable substance (thinner
or benzene). Fire or electric shock accident can occur.
yDo not allow a impact shock or any objects to fall into the product, and do not drop
onto the screen with something.
You may be injured or the product can be damaged.
yNever touch the product or antenna during a thunder or lighting storm.
You may be electrocuted.
yNever touch the wall outlet when there is leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
6
ENG
ENGLISH
SAFETY INSTRUCTIONS
yDo not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
yIf any of the following occur, unplug the product immediately and contact your local
service centre.
- The product has been impacted by shock
- The product has been damaged
- Foreign objects have entered the product
- The product produced smoke or a strange smell
This may result in fire or electric shock.
yIf you don’t intend to use the product for a long time, unplug the power cable from
the product.
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.
yApparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
7
ENGENGLISH
SAFETY INSTRUCTIONS
CAUTION
yInstall the product where no radio wave occurs.
yThere should be enough distance between an outside antenna and power lines to
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
yDo not install the product on places such as unstable shelves or inclined surfaces.
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
yIf you install the TV on a stand, you need to take actions to prevent the product
from overturning. Otherwise, the product may fall over, which may cause injury.
yIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
yOnly use the attachments / accessories specified by the manufacturer.
yWhen installing the antenna, consult a qualified service man.
This may create a fire hazard or an electric shock hazard.
5~7 times
yWe recommend that you maintain a distance of at least 5 to 7 times the diagonal
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
yOnly use the specified type of battery.
This could cause damage to the remote control.
yDo not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
yMake sure there are no objects between the remote control and its sensor.
ySignal from the remote control may be disturbed by sun light or other strong light.
In this case, darken the room.
yWhen connecting external devices such as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
8
ENG
ENGLISH
SAFETY INSTRUCTIONS
yDo not turn the product On/Off by plugging-in or unplugging the power plug to the
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
yPlease follow the installation instructions below to prevent the product from
overheating.
- The distance between the product and the wall should be more than 10 cm.
- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
- Do not install the product on a carpet or cushion.
- Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
yTake care not to touch the ventilation openings when watching the TV for long
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
yPeriodically examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
yPrevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.
yProtect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
yDo not press strongly upon the panel with a hand or sharp object such as nail,
pencil or pen, or make a scratch on it.
yAvoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effects on the screen.
yWhen cleaning the product and its components, unplug the power first and wipe it
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
yAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
yWhen unplugging the cable, grab the plug and unplug it.
If the wires inside the power cable are disconnected, this may cause fire.
yWhen moving the product, make sure you turn the power off first. Then, unplug the
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
9
ENGENGLISH
SAFETY INSTRUCTIONS
yWhen moving or unpacking the product, work in pairs because the product is
heavy.
Otherwise, this may result in injury.
yContact the service center once a year to clean the internal parts of the product.
Accumulated dust can cause mechanical failure.
yRefer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
yIf the product feels cold to the touch, there may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong with product.
yThe panel is a high technology display product with resolution of two million to six
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
yYou may find different brightness and colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
yDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
10
ENGLISH
10 INSTALLATION PROCEDURE
INSTALLATION PROCEDURE
NOTE
11
ENGLISH
11
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
CAUTION
Remote control,
Batteries (AAA)
Stand Base
Screw for assembly
Owner's Manual
Power Cord AC-DC Adapter
Stand Body
Isolator
(Depending on model)
Cable Holder
12
ENGLISH
12 ASSEMBLING AND PREPARING
NOTE
A
B
A
B
13
ENGLISH
13
ASSEMBLING AND PREPARING
OPTION
POWER, Programme, Volume INPUT
NOTE
Parts and buttons
button Description
☞☞
Programme
Volume
INPUT
HDMI IN
DC-IN ANTENNA /
CABEL IN
USB IN
RGB IN (PC)
AV IN
VIDEO
(MONO)
LAUDIO R
5 V 0.5 A
(Power Button)
Standby Light
»
»
14
ENGLISH
14 ASSEMBLING AND PREPARING
Lifting and moving the TV
Setting up the TV
Attaching the Stand Base
CAUTION
CAUTION
1
2
3
15
ENGLISH
15
ASSEMBLING AND PREPARING
CAUTION
Mounting on a table
AC-DC AdapterPower Cord
WARNING
NOTE
16
ENGLISH
16 ASSEMBLING AND PREPARING
Using the Kensington security system
NOTE
Mounting on a wall
Tidying cables
This manual suits for next models
2
Table of contents
Other LG LCD TV manuals
