LG 32LC5DC User manual

담 당 관리자
MODEL BRAND
Printing Specification
1. Trim Size (Format) : 185 mm x 260 mm
2. Printing Colors
•Cover : 1 COLOR (BLACK)
•Inside : 1 COLOR (BLACK)
3. Stock (Paper)
•Cover : Coated paper , Snow White 150 g/㎡
•Inside : Uncoated paper , 백상지 60 g/㎡
4. Printing Method : OFF-SET
5. Bindery : Saddle stitch
6. Language : English
7. Number of pages : 36 PAGE
Model Description
Part No.
2.
User’s Guide Specification
1.
User’s Guide Specification
Changes
4.
REV.
NO. MM/DD/YY SIGNATURE CHANGE NO. CHANGE CONTENTS
1
2
4
5
7
6
SUFFIX
32/37/42LC5DC
32LX5DC/42PX8DC LG MFL34797007
(0809-REV10)
(1) Origin Notification
* LGESY : China * LGEVN : Vietnam * LGEEG : Egypt * LGEAZ : Brazil
* LGENP : China * LGETH : Thailand * LGEMA : Poland
* LGEIN : Indonesia * LGEIL : India * LGERA : Russia
* LGEDI : Indonesia * LGEAK : Kazakhstan * LGERS : Mexico
8
9
Special Instructions3.
Product Name 32/37/42LC5DC,32LX5DC,
42PX8DC
KIM WON
MI
07.04.09
KANG KWANG
SUK
07.04.09
USA
April.09.07 KIM WON MI S7-78950
April.26.07 KIM WON MI S7-80992
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted
when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
N
O
T
E
S
[PA74A/LA74A ] Revised the CD Manual/Simple Book by PQ
test results.
[PA74A/LA74A ]Changed the CD manual/Simple book for
add the model name.
June.12.07 Park Sun Young S7-85352 Applied the PQ test results of 32LX5DC-UA
June.22.07 Park Sun Young S7-85870 Applied the PQ test results of 42PX8DC-UA
[ PA64A/LA64A ] Added the 42LB5DC-UA model name.Sep.04.07 KIM WON MI S7-93931
Sep./13/07 KIM WON MI S7-94054
Added the D-RRT function and corrected the RS-232C
in the manual.
May/03/08 KIM WON MI S8-21950 [ RUSHMORE ] Add the screw and model name.
July/14/08 KIM WON MI S8-25428 [ PA80A ] Add the model name.

Pagination sheet
Pagination sheet P/NO. MFL34797007
Total pages : 36 pages
Front cover
2…
LG(EN)
P/No.
Rear cover
Blank Page
LG
34
…
REV.
NO. MM/DD/YY SIGNATURE CHANGE NO. CHANGE CONTENTS
10
11
3
4
5
7
6
8
9
Changes
4.
July/28/08 KIM WON MI S8-26653 [ LA64A ] ADD THE PROTECTIVE BRACKET AND BOLTS FOR
POWERCORD
Sep./08/08 KIM WON MI S8-29753 [ PA80A ] Revised the manual/cd revision as PQ test results.

P/NO : MFL34797007 (0809-REV10)
Printed in Korea
www.lgcommercial.com
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
service.
LCD TV
OWNER’S MANUAL
PLASMA TV MODEL
42PX8DC
42PG65C
42PG60C
PLASMA TV
32LC5DC
32LC5DCS
32LC5DCB
37LC5DC
37LC5DCB
37LC5DC1
42LC5DC
32LX5DC
32LX5DCS
42LB5DC
32LC50C
32LC50CS
32LC50CB
32LX50C
32LX50CS
37LC 50C
37LC50CB
42LB50C
42LC50C
LCD TV MODELS
MFL34797007en-simp 9/8/08 3:15 PM Page 1

2
WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
FCC NOTICE
Class B digital device
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is con-
nected.
- Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
CAUTION
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and main-
tenance (servicing) instructions in the literature
accompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding sys-
tem of the building, as close to the point of the cable
entry as practical.
MFL34797007en-simp 9/8/08 3:15 PM Page 2

3
IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong, The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by
the manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus com-
bination to avoid injury from tip-over.
Unplug this apparatus during lighting storms
or when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Never touch this apparatus or antenna during
a thunder or lighting storm.
When mounting a TV on the wall, make sure
not to install the TV by the hanging power and
signal cables on the back of the TV.
Do not allow an impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance
and has no additional outlets or branch
circuits. Check the specification page of this
owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
18
9
10
11
12
13
14
2
3
4
5
6
7
MFL34797007en-simp 9/8/08 3:15 PM Page 3

4
SAFETY INSTRUCTIONS
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.
WARNING - To reduce the risk of fire or elec-
trical shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles
or expose the TV to direct air conditioning.
Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.
on shelves above the unit).
GGRROOUUNNDDIINNGG
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC out-
let). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas pipes.
DDIISSCCOONNNNEECCTTIINNGGDDEEVVIICCEEFFRROOMMMMAAIINNSS
Mains plug is the disconnecting device. The
plug must remain readily operable.
Keep the product away from direct sunlight.
AANNTTEENNNNAASS
OOuuttddoooorraanntteennnnaaggrroouunnddiinngg
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of over-
head power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits as death or
serious injury can occur.
Be sure the antenna system is grounded so as
to provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors, location of antenna dis-
charge unit, connection to grounding electrodes
and requirements for the grounding electrode.
A
Anntteennnnaaggrroouunnddiinnggaaccccoorrddiinnggttootthhee
NNaattiioonnaallEElleeccttrriiccaallCCooddee,,AANNSSII//NNFFPPAA7700
CClleeaanniinngg
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.
MMoovviinngg
Make sure the product is turned off,
unplugged and all cables have been removed. It
may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.
VVeennttiilla
attiioonn
Install your TV where there is proper ventila-
tion. Do not install in a confined space such as
a bookcase. Do not cover the product with
cloth or other materials (e.g.) plastic while
plugged in. Do not install in excessively dusty
places.
If you smell smoke or other odors coming from
the TV or hear strange sounds, unplug the
power cord contact an authorized service center.
On Disposal (Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains a
small amount of mercury. Do not dispose of this
product with general household waste. Disposal of
this product must be carried out in accordance to the
regulations of your local authority.
Power
Supply
Short-circuit
Breaker
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductors
(NEC Section 810-21)

Ground Clamps

Power Service Grounding
Electrode System (NEC
Art 250, Part H)




Ground Clamp
Electric Service
Equipment
NEC: National Electrical Code
15
20
21
22
23
24
16
17
18
19
MFL34797007en-simp 9/8/08 3:15 PM Page 4

5
CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 14
Protection Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Attaching the TV to a desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 20
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
WATCHING TV
Turning On the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
HOW TO USE THE OWNER'S MANUAL ON THE CD-ROM
To view the Owner's Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.
The “ACRORD" folder on the CD-ROM contains the installation programs for them.
If you want to install those programs, Open the “My Computer” Open the “LG” Open the
“ACRORD” double-click your language.
TO VIEW THE OWNER'S MANUAL ON THE CD-ROM
The Owner's Manual files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically. (for Window only)
GGIf the web page does not appear automatically, open the Owner's Manual file directly.
Open the “My computer” Open the “LG” Open the “index.htm” file.
NOTE
When you select your product,
display the PDF file.
You can find the desired contents
easily using the bookmark.
MFL34797007en-simp 9/8/08 3:15 PM Page 5

PREPARATION
6
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please con-
tact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
For further information, see the the Owner's Manual files supplied CD-ROM.
Owner’s Manual,
Setup & Operation Guide
for Commercial Mode
ENTER
TV
INPUT
MODE
DVD
MULTI
EXIT
OL
EZSOUND
INFO
SWAP
EZPIC
TIMER
MUTE
CH
SAP
CC
RATIO
MENU
VCR
POWER
23
6
9
PIP
PIPCH - PIPCH +
PIPINPUT
ENTER
TV
TV
INPUT
INPUTMODE
DVD
MULTI
EXIT
VOL
EZSOUND
INFO
SWAP
EZPIC
TIMER
MUTE
CH
SAP
CC
RATIO
MENU
VCR
POWER
123
456
789
0
FLASH
BACK
PIP
PIPCH - PIPCH +
PIPINPUT
PAGE
PAGE
Remote Control,
Batteries
Power Cord
CD Manual
(Refer to p.5)
LCD TV PLASMA TV
Owner's Manual
http://www.lgusa.com
www.lg.ca
Copyright©2007 LGE,
AllRights Reserved.
LLCCDDTTVVmmooddeelloonnllyy
4-Bolts for stand
assembly
(Refer to p.11)
32/37LC5DC*, 32/37LC50C*
models only
D-sub 15 pin Cable
OOppttiioonnEExxttrraass
1.5V 1.5V
1-Bolt for fixing the
Cable Holder
(Refer to p.14)
Cable Management
(Refer to p.14)
Cable Holder
(Refer to p.14)
Only 32/37/42LC5DC*,
32/37/42LC50C*, 42LB5DC, 42LB50C models
* Slightly wipe stained spot on the
exterior only with the polishing
cloth for the product exterior if
there is stain or fingerprint on
surface of the exterior.
* Do not wipe roughly when remov-
ing stain. Please be cautions of
that excessive pressure may cause
scratch or discoloration.
Polishing Cloth
This feature is not available
for all models.
x 2
Torx plus
Star head screw
(Refer to p.11)
Protective Bracket and Bolt for
Power Cord
(This feature is not available for all models.)
(Refer to P.14)
MUTE
RETURN
TIMER
TV
POWER
RATIO
CC
ENTER
VOLCH
123
456
78
0
9
FLASHBK
VCR
DVD
INPUT
MENU
INFO
i
STB
P
A
G
E
PIPSAP
PIPCH-PIPCH+
PIPSWAP
PIPINPUT
or
PPllaassmmaaTTVVmmooddeellssoonnllyy
75 ohm Round Cable
(Except 42PG60C/65C)
D-sub 15 Pin Cable
(Except 42PG60C/65C)
Only 42PG65C model
Cable Management Clip Bolts for stand
assembly
(Refer to P.18)
x 4
Cable Holder
(Except 42PX8DC)
MFL34797007en-simp 9/8/08 3:15 PM Page 6

PREPARATION
7
FRONT PANEL INFORMATION
■
Here shown may be somewhat different from your TV.
■
If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a
polishing cloth is included with your product, use it).
CHCH
VOLOL
ENTERENTER
MENUMENU
INPUTINPUT
Remote Control Sensor
Power/Standby Indicator
Illuminates red when the TV is in standby mode.
Illuminates green when the TV is switched on.
CHANNEL Buttons
VOLUME Buttons
ENTER Button
MENU Button
INPUT Button
ON/OFF Button
32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C
32LX5DC*, 32LX50C*
CH
CH
VOL
VOL
ENTER
ENTER
INPUT
INPUT
MENU
MENU
ON/OFF
ON/OFF
VOLUME Buttons
Remote Control Sensor
Power/Standby
Indicator
Illuminates red when the
TV is in standby mode.
Illuminates green when
the TV is switched on.
CHANNEL Buttons
ENTER Button
ON/OFF Button
INPUT Button
MENU Button
MFL34797007en-simp 9/8/08 3:15 PM Page 7

PREPARATION
8
PREPARATIONPREPARATION
CH
VOL
MENUINPUT ENTER
INPUT ENTER
INPUT ENTER
VOLUME Buttons
CHANNEL Buttons
ENTER Button
ON/OFF Button
INPUT Button
MENU Button
Remote Control Sensor
Power/Standby Indicator
Illuminates red when the TV is in standby mode.
Illuminates green when the TV is switched on.
This TV’s stand is sold, separately.
42PX8DC
INPUTINPUT ENTERENTER
INPUT ENTER
CH
VOL
MENU
INPUT ENTER
CHANNEL (EE, DD)
Buttons
VOLUME (-,+)
Buttons
MENU
Button
ENTER
Button
INPUT
Button
CH
VOL
MENU
INPUT ENTER
CH
VOL
MENU
INPUT ENTER
Remote Control Sensor
POWER Button
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the set is switched
on.
42PG60C, 42PG65C
SSttaanndd(Only 42PG65C model)
MFL34797007en-simp 9/8/08 3:15 PM Page 8

PREPARATION
9
BACK PANEL INFORMATION
■
Here shown may be somewhat different from your TV.
AV IN 2
L/MONO
R
AUDIO
VIDEO
S-VIDEO
( )
ANTENNA IN M.P.I.
11
32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C 32LX5DC*, 32LX50C*
R
AV IN 2
VIDEO
S-VIDEO
L/MONO
R
AUDIO
42PX8DC
11
11
AV IN 2
L/
MO
N
O
R
AUDIO
A
O
VIDE
O
S-VIDEO
8
8
8
42PG60C, 42PG65C
( )
R
( )
AV IN 2
L/MONO
R
AUDIO
VIDEO
S-VIDEO
11
8
MFL34797007en-simp 9/8/08 3:15 PM Page 9

PREPARATION
10
PREPARATION
R
VIDEO
AUDIO
VIDEO
AUDIO
MONO
()
S-VIDEO
REMOTE
CONTROL
OUT
RGB IN
AUDIO
IN
(RGB, DVI)
RESET
UPDATE
M.P.I.
1(DVI)
RJP
INTERFACE
2
SERVICE ONLY
HDMI/DVI IN
SPEAKER
OUT
8
AV IN 1
COMPONENT IN
DIGITAL
AUDIO
OUT
(OPTICAL)
ANTENNA INANTENNA IN M.P.I.M.P.I.
6
1
5
2
3
4
7
8
9
10
12
HDMI/DVI IN, HDMI IN
Connect a HDMI (DVI) connection to either input.
DIGITAL AUDIO OUT
Connect digital audio from various types of equip-
ment.
Note: In standby mode, these ports do not work.
M.P.I
RESET/UPDATE/REMOTE CONTROL OUT
SERVICE ONLY
RGB IN (PC)
Connect the output from a PC.
AUDIO IN (RGB, DVI)
Connect the audio from a PC or DTV.
SPEAKER OUT 8Ω
AV (Audio/Video) IN
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
COMPONENT IN
Connect a component video/audio device to these
jacks.
RJP INTERFACE
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
ANTENNA IN
Connect over-the air signals to this jack.
18
9
10
11
12
2
3
4
5
6
7
13
13
■
Here shown may be somewhat different from your TV.
This part mainly use picture for the LCD TV models.
VIDEO
AUDIO
VIDEO
AUDIO
MONO
(
)
S-VIDEO
REMOTE
CONTROL
OUT
RESET UPDATE
1
HDMI IN
SPEAKER
OUT
8
AV IN 1
COMPONENT IN
2
LR
LR
AUDIO
(RGB / DVI)
RGB IN
RGB(PC)
RJP
INTERFACE
OPTICAL
DIGITAL
AUDIO OUT
SERVICE ONLY
DVI IN
1
6
98
4
4
7
10 2
(Only 42PG60C, 42PG65C Models)
5
MFL34797007en-simp 9/8/08 3:15 PM Page 10

PREPARATION
11
Tighten the two of these four screws and
the two Torx plus star head screws (provid-
ed as parts of the TV) to secure the TV.
Tighten the two Torx plus star head screws
with a star head driver bit (not provided
as parts of the TV).
x 2 x 2
x 4
Tighten the stand with the
four screws (provided as parts
of the TV).
or
LLCCDDTTVVmmooddeelloonnllyy
STAND INSTALLATION
Carefully place the product screen side down
on a cushioned surface that will protect prod-
uct and screen from damage.
Assemble the product stand with the product
as shown.
Securely install the 4 bolts provided.
1
2
3
( 32/37LC5DC*, 32/37LC50C* )
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the product stand with the product as
shown.
Tighten the 4 bolts securely using the holes in
the back of the TV.
1
2
3
( 42PG65C )
MFL34797007en-simp 9/8/08 3:15 PM Page 11

PREPARATION
12
PREPARATION
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZ SOUND
INFO
SWAP
EZ PIC
TIMER
MUTE
CH
SAP
CC RATIO
MENU
VCR
POWER
123
456
789
0
FLASH
BACK
PIP
PIP CH - PIP CH +
PIP INPUT
PAGE
NUMBER button
VCR/DVD
control buttons
Turns your TV or any other programmed equipment on
or off, depending on mode.
In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2
input sources, screen returns to the last TV channel.
External input modes rotate in regular sequence: TV, AV1-
2, Component, RGB, HDMI1/DVI and HDMI2.
Selects: RGB,HDMI1/DVI, HDMI2 and Component input
sources.
Adjusts brightness on screen.
Switches the sub picture Double Window or off mode.
Changes the PIP channel.
Select the connected input source for the sub-picture.
Selects the factory preset picture depend on the viewing
environment.
Selects the factory preset sound for type of program.
Exchange the main/sub images.
Control video cassette recorders or DVD players.
Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
Tune to the last channel viewed.
POWER
TV INPUT
INPUT
MULTI
PIP
PIP CH +/-
PIP INPUT
EZ PIC
EZ SOUND
SWAP(or PIP
SWAP)
— (DASH)
FLASH BACK
MFL34797007en-simp 9/8/08 3:15 PM Page 12

PREPARATION
13
■Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+ with +, - with -).
■Install two 1.5V AA batteries(or 1.5V AAA)
Don’t mix old or used batteries with new ones.
■Close cover.
■Use a remote control up to 7 meters distance
and 30 degree (left/right) within the receiving
unit scope.
■Dispose of used batteries in a recycle bin to
preserve environment.
INPUT ENTER
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZSOUND
INFO
SWAP
EZPIC
TIMER
MUTE
CH
SAP
CC RATIO
MENU
VCR
POWER
123
PIP
PIPCH- PIPCH+
PIPINPUT
PAGE
Installing Batteries Remote control effective range
Select the remote’s operating mode: TV, DVD, VCR (or
STB).
Change the aspect ratio.
Select a closed caption.
Navigate the on-screen menus and adjust the system set-
tings to your preference.
Clears all on-screen displays and returns to TV viewing
from any menu.
Displays the main menu.
Display information at the top of the screen.
Increase/decrease the sound level.
Select the amount of time before your TV turns off auto-
matically.
Switch the sound on or off.
Select available channels.
Move from one full set of screen information to the next one.
MODE
RATIO
CC
THUMBSTICK
(Up/Down/Left
/Right/ENTER)
EXIT(or
RETURN)
MENU
INFO
VOLUME UP
/DOWN
TIMER
MUTE
CHANNEL
UP/DOWN
PAGE
UP/DOWN
INPUT ENTER
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZSOUND
INFO
SWAP
EZPIC
TIMER
MUTE
CH
SAP
CC RATIO
MENU
VCR
POWER
123
PIP
PIPCH- PIPCH+
PIPINPUT
PAGE
INPUTINPUT ENTERENTER
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZSOUND
INFO
SWAP
EZPIC
TIMER
MUTE
CH
SAP
CC RATIO
MENU
VCR
POWER
123
456
PIP
PIPCH- PIPCH+
PIPINPUT
PAGE
32/37/42LC5DC*,
42LB5DC, 32/37/42LC5DC*,
32/37/42LC50C*,
42LB5DC, 42LB50C
32LX5DC*, 32LX50C* 42PX8DC
MUTE
RETURN
TIMER
TV
POWER
RATIO CC
ENTER
VOL CH
123
456
78
0
9
FLASHBK
VCR
DVD
INPUT
MENU
INFO
i
STB
P
A
G
E
PIP SAP
PIP CH- PIP CH+
PIP SWAP PIP INPUT
(Only 42PG60C, 42PG65C models)
MFL34797007en-simp 9/8/08 3:15 PM Page 13

PREPARATION
14
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help prevent
the power cable from being removed by accident.
Install the CABLE MANAGEMENT as shown.
How to remove the CABLE MANAGEMENT
GGHold the CABLE MANAGEMENT with both hands and
pull it backward.
CABLE MANAGEMENT
GGDo not hold the CABLE MANAGEMENT when moving
the product.
- If the product is dropped, you may be injured or the
product may be damaged.
NOTE
1
2
Install the CABLE HOLDER as shown.
CABLE HOLDER
2
BOLT
■
Here shown may be somewhat different from your TV.
PROTECTIVE BRACKET
(This feature is not available for all models.)
MFL34797007en-simp 9/8/08 3:15 PM Page 14

PREPARATION
15
BACK COVER FOR WIRE ARRANGEMENT
■
Here shown may be somewhat different from your TV.
(This feature is not available for all models.)
Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help prevent
the power cable from being removed by accident.
2
Install the CABLE HOLDER as shown.
CABLE
HOLDER
3
BOLT
To separate the CABLE HOLDER, loosen the bolt
installed the set.
1
PROTECTIVE BRACKET
MFL34797007en-simp 9/8/08 3:15 PM Page 15

PREPARATION
16
PREPARATION
42PX8DC
Hold the CABLE MANAGEMENT with both
hands and pull it as shown.
Connect the cables as necessary.
To connect an additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
1
2
Install the CABLE MANAGEMENT as shown.
3
45 °
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
1
Install the CABLE MANAGEMENT CLIP as
shown. (Except 42PG60C model)
If your TV has CABLE HOLDER, fix it as shown
and bundle the cables.
2
CABLE MANAGEMENT
CLIP
CABLE HOLDER
GGDo not hold the CABLE MANAGEMENT CLIP
when moving the TV.
- If the TV is dropped, you may be injured or
the product may be broken.
NOTE
!
How to remove the
CABLE MANAGEMENT CLIP
(Except 42PG60C model)
GGFirst, press the cable management. Hold the
CCAABBLLEEMMAANNAAGGEEMMEENNTTCCLLIIPPwith both
hands and pull it upward.
42PG60C, 42PG65C
MFL34797007en-simp 9/8/08 3:15 PM Page 16

PREPARATION
17
ATTACHING THE TV TO A WALL
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
■Insert the TV brackets (or eye-bolts) and bolts to tighten the product to the wall as shown in the picture.
*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■Use a sturdy rope (not provided as parts of the product, must pur-
chase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.
The TV can be conveniently swivelled on its stand 20°or 90° to the left or right to provide the opti-
mum viewing angle.
SWIVEL STAND
20° (37LC5DC1, 42LC5DC, 42LC50C, 42PX8DC,
42LB5DC, 42LB50C, 42PG65C models)
90° (32LX5DC/S, 32LX50C/S, 32LC5DC/S,
32LC50C/S, 37LC5DC, 37LC50C models)
■This feature is not available for all models.
MFL34797007en-simp 9/8/08 3:15 PM Page 17

PREPARATION
18
PREPARATION
ATTACHING THE TV TO A DESK
The TV must be attached to desk so it cannot be pulled in a forward/backward direction,
potentially causing injury or damaging the product.
* SSccrreewwss--MM55xxLL((ttaabblleeddeepptthh++88~1100mmmm))
ex) table depth-15mm: Bolts - M5 x 25
4-Screws
Stand
Desk
32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C
32LX5DC*, 32LX50C*
4-Screws
Stand
Desk
2-Screws
Stand
Desk
42PG65C
42PX8DC
4-Screws
Stand
Desk
WARNING
GGThis apparatus must be securely attached to the floor/wall per installation
instructions.Tipping, shaking, or rocking the television may cause injury/death.
■
Here shown may be somewhat different from your TV.
MFL34797007en-simp 9/8/08 3:15 PM Page 18