LG LCD TV / LED LCD TV User manual

www.lg.com
OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
TV_CD 210X280.indd 1 2010-01-10 �� 2:10:27

GB-1
CONTENTS
Diagnostics------------------------------------ 48
CI Information (In Digital Mode Only)- - - - - - - - - - - - - - - - 49
Network Setting (In Digital Mode) - - - - - - - - - - - - - - - - - - 50
MHPAutoStart--------------------------------- 51
Selecting the Programme List- - - - - - - - - - - - - - - - - - - - - - 52
InputList-------------------------------------- 53
InputLabel------------------------------------ 54
AVMode-------------------------------------- 54
Multifeed ------------------------------------- 55
Initializing (Reset to original factory settings) - - - - - - - - - 56
TO USE A USB DEVICE
PhotoList------------------------------------- 59
MusicList ------------------------------------- 64
MovieList------------------------------------- 70
DivXRegistrationCode--------------------------- 77
Deactivation----------------------------------- 78
EPG (ELECTRONIC PROGRAMME GUIDE)
(In Digital Mode)
Button Function in NOW/NEXT Guide Mode - - - - - - - - - - 80
Button Function in 8 Day Guide Mode - - - - - - - - - - - - - - - 81
Button Function in Date Change Mode - - - - - - - - - - - - - - 82
Button Function in Extended Description Box - - - - - - - - - 82
Button Function in Remind Setting Mode - - - - - - - - - - - - 83
Button Function in Schedule List Mode - - - - - - - - - - - - - - 84
PREPERATION
LCDTVModels:32/42LD5**------------------------ 3
LED TV Models : 32/42LE5*** - - - - - - - - - - - - - - - - - - - - - - 10
EXTERNAL EQUIPMENT SETUP
AntennaConnection ---------------------------- 16
HDReceiverSetup ------------------------------ 17
DVDSetup ------------------------------------ 19
VCRSetup------------------------------------- 21
InsertionofCIModule --------------------------- 23
DigitalAudioOutSetup-------------------------- 23
headphonesetup------------------------------- 23
OtherA/VSourceSetup-------------------------- 24
USBSetup------------------------------------- 24
PCSetup-------------------------------------- 25
WATCHING TV/PROGRAMME CONTROL
Remote Control Key Funtions - - - - - - - - - - - - - - - - - - - - - - 31
TurningOnTheTV ------------------------------ 33
ProgrammeSelection---------------------------- 33
VolumeAdjustment----------------------------- 33
CI+CAM-------------------------------------- 34
QuickMenu ----------------------------------- 36
On Screen Menus Selection and Adjustment - - - - - - - - - - 37
Antenna Auto Programme Tuning - - - - - - - - - - - - - - - - - - 38
Antenna Manual Programme Tuning (In Digital Mode) - - 39
Antenna Manual Programme Tuning (In Analogue Mode) 40
Satellite Tuning (LNB Only) - - - - - - - - - - - - - - - - - - - - - - - - 42
Satellite Tuning (DiSEqC) - - - - - - - - - - - - - - - - - - - - - - - - - 43
ProgrammeEdit -------------------------------- 44
SoftwareUpdate-------------------------------- 46
CONTENTS
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.

GB-2
CONTENTS
CONTENTS
PICTURE CONTROL
Picture Size (Aspect Ratio) Control - - - - - - - - - - - - - - - - - - 85
EnergySaving---------------------------------- 87
Preset Picture Settings - Picture Mode - - - - - - - - - - - - - - - 88
Manual Picture Adjustment - User Mode - - - - - - - - - - - - - 89
Picture Improvement Technology - - - - - - - - - - - - - - - - - - 90
PictureReset----------------------------------- 93
Trumotion------------------------------------- 94
PowerIndicator--------------------------------- 95
ModeSetting ---------------------------------- 96
SOUND & LANGUAGE CONTROL
AutoVolumeLeveler ---------------------------- 97
Preset Sound Settings - Sound Mode ---------------- 98
Manual Sound Setting Adjustment - User Mode - - - - - - - 99
InniteSound---------------------------------- 99
Balance-------------------------------------- 100
TV Speakers On/O Setup - - - - - - - - - - - - - - - - - - - - - - - 101
Selecting Digital Audio Out - - - - - - - - - - - - - - - - - - - - - - 102
AudioReset----------------------------------- 103
Audio Description (In Digital Mode Only)- - - - - - - - - - - - 104
I/II------------------------------------------ 105
- Stereo/Dual Reception (In Analogue Mode Only)- - - - - 105
- NICAM Reception (In Analogue Mode Only) - - - - - - - - 106
- Speaker Sound Output Selection - - - - - - - - - - - - - - - - - 106
LanguageSelection ---------------------------- 107
TIME SETTING
ClockSetup----------------------------------- 108
Auto On/O Time Setting- - - - - - - - - - - - - - - - - - - - - - - - 109
SleepTimerSetting----------------------------- 110
PARENTAL CONTROL / RATINGS
Set Password & Lock System- - - - - - - - - - - - - - - - - - - - - - 111
Block Programme - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 112
Parental Control (In Digital Mode Only) - - - - - - - - - - - - - 113
KeyLock------------------------------------- 114
TELETEXT
SwitchOn/O--------------------------------- 115
Simple Text - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 115
Fastext -------------------------------------- 115
Special Teletext Functions - - - - - - - - - - - - - - - - - - - - - - - 116
APPENDIX
Troubleshooting------------------------------- 117
Maintenance---------------------------------- 118
ProductSpecications -------------------------- 119
OpenSourceLicense --------------------------- 120

GB-3
PREPARATION
LCD TV MODELS : 32/42LD5**
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you
purchased the TV.
Image shown may differ from your TV
Owner’s Manual Batteries (AAA) Remote Control
This item is not included for all models.
* Lightly wipe any stains or
fingerprints on the surface of the
TV with the polishing cloth.
Power Cord Protection Cover
Polishing Cloth
Polishing cloth for use on the
screen.
Do not use excessive force. This may
cause scratching or discolouration.
Bolts for stand assembly 1-screw for stand fixing
Wall Mounting Bracket (Seperate purchase)
■
PREPERATION
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AVMODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AVMODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
x 8
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
M4 x 20
LSW100B or
LSW100BG
32LD5** 42LD5**
LSW200B or
LSW200BG

GB-4
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
NOTE :
TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the
power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will
reduce the overall running cost.
CAUTION :
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or
the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Image shown may differ from your TV.
►
►
►
►
■
INPUT
MENU
OK
P
PROGRAMME
VOLUME
OK
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
INPUT
MENU
OK
P
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is
switched on.
INPUT
MENU
OK
P
MENU
INPUT
POWER
Remote Control Sensor
SPEAKER

GB-5
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
󲼓Power Cord Socket
This TV operates on an AC power. The voltage is indicated on
the Specifications page. Never attempt to operate the TV on
DC power.
󲼔HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO) signal to HDMI/DVI port with DVI to HDMI
cable.
󲼕ETHERNET Input
Connect a LAN cable.
󲼖Component Input
Connect a component video/audio device to these jacks.
󲼗Euro Scart Socket (AV1)
Connect scart socket input or output from an external device
to these jacks.
󲼘OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment. Connect
to a Digital Audio Component. Use an Optical audio cable.
Note: In standby mode, these ports do not work.
󲼙RGB/DVI Audio Input
Connect the audio from a PC or DTV.
󲼚RGB IN Input
Connect the output from a PC.
󲼛Satellite LNB Input
Connect a satellite antenna cable.
󲼜Antenna Input
Connect a RF antenna or cable to this jack.
󲼝USB Input
Connect USB storage device to this jack.
󲼞PCMCIA (Personal Computer Memory Card
International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
󲼟Headphone Socket
Plug the headphone into the headphone socket.
󲼠Audio/Video Input (AV2)
Connect audio/video output from an external device to these
jacks.
■
CABLEMANAGEMENT
AC IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
USB IN
H/P
IN4
󲼔
󲼓
󲼘󲼚󲼙
󲼠
󲼟
󲼔
󲼞
󲼝
󲼕 󲼖 󲼗
󲼛 󲼜

GB-6
PREPARATION
PREPARATION
STAND INSTALLATION
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt
is fully tightened. (If not tightened fully, the product can tilt
forward after the product installation.) If you tighten the bolt
with excessive force, the bolt can deviate from abrasion of the
tightening part of the bolt.
➊ Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
➋ Assemble the parts of the Stand Body with the Stand
Base of the TV.
➌ Assemble the TV as shown.
➍ Fix the 4 bolts securely using the holes in the
back of the TV.
■
BACK COVER FOR WIRE
ARRANGEMENT
Image shown may differ from your TV.
➊ Connect the cables as necessary.
To connect additional equipment, see the External
Equipment Setup section.
➋ Install the CABLE MANAGEMENT CLIP as shown.
➌ Fit the CABLE MANAGEMENT CLIP as shown.
NOTE :
Do not use the Cable Management Clip to lift the TV.
- If the TV is dropped, you may be injured or the TV may be
damaged.
►
■
AC IN
CABLEMANAGEMENT
AC IN
CABLEMANAGEMENT
AC IN
CABLEMANAGEMENT
Stand Body
Stand Base
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
CABLE MANAGEMENT CLIP
AC IN
CABLEMANAGEMENT
AC IN
CABLEMANAGEMENT
AC IN
CABLEMANAGEMENT
AC IN
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
AC IN
CABLEMANAGEMENT
AC IN
CABLEMANAGEMENT
AC IN
CABLEMANAGEMENT
AC IN
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
CABLEMANAGEMENT
AC IN
CABLEMANAGEMENT
AC IN
CABLEMANAGEMENT

GB-7
PREPARATION
ATTACHING THE TV TO A DESK
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be pulled in
a forward/backward direction, potentially causing injury or
damaging the product. Use only an attached screw.
WARNING
To prevent TV from falling over, the TV should be securely
attached to the floor/wall per installation instructions.
Tipping, shaking, or rocking the machine may cause
injury.
■
►
NOT USING THE DESKTYPE
STAND
Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover.
Insert the Protection Cover into the TV until clicking sound.
SWIVEL STAND
Image shown may differ from your TV.
After installing the TV, you can adjust the TV manually to the left or
right direction by 20 degrees to suit your viewing position.
■
■
CABLE MANAGEMENT
AC IN
1-Screw
( provided as parts of the product)
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
AC IN
Stand
Desk
Protection Cover

GB-8
PREPARATION
PREPARATION
KENSINGTON SECURITY
SYSTEM
This feature is not available for all models.
Image shown may differ from your TV.
The TV is equipped with a Kensington Security System connector
on the back panel. Connect the Kensington Security System cable
as shown below.
For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
For further information, contact http://www.kensington. com,
the internet homepage of the Kensington company. Kensington
sells security systems for expensive electronic equipment such as
notebook PCs and LCD projectors.
NOTE
The Kensington Security System is an optional accessory.
If the TV feels cold to the touch, there may be a small
“flicker” when it is turned on. This is normal, there is
nothing wrong with TV.
Some minute dot defects may be visible on the screen,
appearing as tiny red, green, or blue spots. However, they
have no adverse effect on the monitor’s performance.
Avoid touching the LCD screen or holding your finger(s)
against it for long periods of time. Doing so may produce
some temporary distortion effects on the screen.
■
■
►
►
►
►
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components to fix the TV
safety and secure to the wall on the market.
Position the TV close to the wall to avoid the possibility of
it falling when pushed.
The instructions shown below are a safer way to set up
the TV, by fixing it to the wall, avoiding the possibility of
it falling forwards if pulled. This will prevent the TV from
falling forward and causing injury. This will also prevent
the TV from damage. Ensure that
➊Use the eye-bolts or TV brackets/bolts to fix the product to the
wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen these bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them
securely in the upper holes.
➋Secure the wall brackets with the bolts on the wall. Match the
height of the bracket that is mounted on the wall.
➌Use a sturdy rope to tie the product for alignment. It is safer to
tie the rope so it becomes horizontal between the wall and the
product.
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to
support the size and weight of the TV.
To use the TV safely make sure that the height of the
bracket on the wall and on the TV is the same.
■
■
■
►
►
►
CABLEMANAGEMENT
AC IN
1
2
3
1
2
3

GB-9
PREPARATION
The TV can be installed in various ways such as on a wall,
or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible electric
shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires,
lightening rods or gas pipes.
DESKTOP PEDESTAL
INSTALLATION
Image shown may differ from your TV.
For adequate ventilation allow a clearance of 10 cm all around the
TV.
WALL MOUNT : HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
We recommend that you purchase a wall mounting
bracket which supports VESA standard.
LG recommends that wall mounting be performed by a
qualified professional installer.
■
■
■
■
■
■
NOTE
Should Install wall mount on a solid wall perpendicular
to the floor.
Should use a special wall mount, if you want to install it
to ceiling or slanted wall.
The surface that wall mount is to be mounted on should
be of sufficient strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hollow block.
Installing screw type and length depends on the wall
mount used. Further information, refer to the instructions
included with the mount.
LG is not liable for any accidents or damage to property
or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may
cause TV to fall and cause personal injury.
- Not following the recommended Installation method.
Model VESA
(A * B)
Standard
Screw Quantity
32LD5** 200 *100 M4 4
42LD5** 200 *200 M6 4
►
►
►
►
►
10cm
10cm
10cm
10cm
10cm
10cm
10cm
10cm
10cm
CABLEMANAGEMENT
AC IN
A
B
10cm
10cm
10cm
10cm
10cm
CABLEMANAGEMENT
AC IN
A
B
Power Supply
Circuit breaker

GB-10
PREPARATION
PREPARATION
LED TV MODELS : 32/42LE5***
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you
purchased the TV.
Image shown may differ from your TV
Owner’s Manual Batteries (AAA) Remote Control
This item is not included for all models.
* Lightly wipe any stains or
fingerprints on the surface of the
TV with the polishing cloth.
Cable Holder
Polishing Cloth
Polishing cloth for use
on the screen.
Do not use excessive force. This may
cause scratching or discolouration.
Bolts for stand assembly 1-screw for stand fixing
(only 32LE5***)
Component gender cable,
AV gender cable
Wall Mounting Bracket (Seperate purchase)
■
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AVMODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AVMODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
LSW100B or
LSW100BG
32LE5*** 42LE5***
LSW200B or
LSW200BG
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
x 2
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT
x 4 x 4
M4 x 22
(only 32LE5***)
M4 x 16
x 4
M4 x 24
(only 42LE5***)
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
OK
MENU
GUIDE
Q.MENU
BACK
INFO
APP/*
ADD
EXIT

GB-11
PREPARATION
FRONT PANEL CONTROLS
NOTE :
TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the
power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will
reduce the overall running cost.
CAUTION :
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or
the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Image shown may differ from your TV.
►
►
►
►
■
P
OK
INPUT
MENU
/ I
P
OK
INPUT
MENU
/ I
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Touch Sensor
• You can use the desired button function by touching.
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
P
OK
INPUT
MENU
/ I
P
OK
INPUT
MENU
/ I
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the TV is switched on.
P
OK
INPUT
MENU
/ I
P
OK
INPUT
MENU
/ I
SPEAKER

GB-12
PREPARATION
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
󲼓HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO) signal to HDMI/DVI port with DVI to HDMI
cable.
󲼔ETHERNET Input
Connect a LAN cable.
󲼕OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment. Connect
to a Digital Audio Component. Use an Optical audio cable.
Note: In standby mode, these ports do not work.
󲼖RGB/DVI Audio Input
Connect the audio from a PC or DTV.
󲼗RGB IN Input
Connect the output from a PC.
󲼘Audio/Video Input (AV2/AV3)
Connect audio/video output from an external device to these
jacks.
󲼙Euro Scart Socket (AV1)
Connect scart socket input or output from an external device
to these jacks.
󲼚Satellite LNB Input
Connect a satellite antenna cable.
󲼛Antenna Input
Connect a RF antenna or cable to this jack.
󲼜USB Input
Connect USB storage device to this jack.
󲼝PCMCIA (Personal Computer Memory Card
International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
󲼞Headphone Socket
Plug the headphone into the headphone socket.
󲼟Component Input
Connect a component video/audio device to these jacks.
■
USB IN
H/P
IN 4
COMPONENT IN
Y/ AUDIO
󲼓
󲼕󲼘󲼗
󲼜
󲼔
󲼚
󲼖󲼙
󲼝
󲼓
󲼞
󲼟󲼘
󲼛
CAUTION
Use a product with the
following thickness for
optimal connection
to HDMI cable (Only
HDMI IN 4) /USB
device.
*A≤10 mm
►

GB-13
PREPARATION
STAND INSTALLATION
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt
is fully tightened. (If not tightened fully, the product can tilt
forward after the product installation.) If you tighten the bolt
with excessive force, the bolt can deviate from abrasion of the
tightening part of the bolt.
➊ Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
➋ Assemble the parts of the Stand Body with the Stand
Base of the TV.
➌ Assemble the TV as shown.
➍ Assemble the parts of the Stand Rear Cover with the TV.
➎ Fix the 4 bolts securely using the holes in the back of the
TV.
■
BACK COVER FOR WIRE
ARRANGEMENT
Image shown may differ from your TV.
➊ Secure the power cord with the Cable Holder on the TV
back cover.It will help prevent the power cable from being
removed by accident.
➋ After connecting the cables as necessary,install Cable
Holder as shown and bundle the cables.
ATTACHING THE TV TO A DESK
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be pulled in
a forward/backward direction, potentially causing injury or
damaging the product. Use only an attached screw.
WARNING
To prevent TV from falling over, the TV should be securely
attached to the floor/wall per installation instructions.
Tipping, shaking, or rocking the machine may cause
injury.
■
■
►
M4 x 22
M4 x 24
M4 x 16
Stand Rear
Cover
Cable Holder
Cable Holder
M4 x 22
M4 x 24
M4 x 16
M4 x 22
M4 x 24
M4 x 16
M4 x 22
M4 x 24
M4 x 16
M4 x 22
M4 x 24
M4 x 16
M4 x 22
M4 x 24
M4 x 16
M4 x 22
M4 x 24
M4 x 16
(only 32LE5***)
Stand Base
(only 42LE5***)
Stand Body
1-Screw
( provided as parts of the product)
Stand
Desk

GB-14
PREPARATION
PREPARATION
SWIVEL STAND
Image shown may differ from your TV.
After installing the TV, you can adjust the TV manually to the left or
right direction by 20 degrees to suit your viewing position.
The TV can be installed in various ways such as on a wall,
or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible electric
shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires,
lightening rods or gas pipes.
DESKTOP PEDESTAL
INSTALLATION
Image shown may differ from your TV.
For adequate ventilation allow a clearance of 10 cm all around the
TV.
■
■
■
■
WALL MOUNT : HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
We recommend that you purchase a wall mounting
bracket which supports VESA standard.
LG recommends that wall mounting be performed by a
qualified professional installer.
NOTE
Should Install wall mount on a solid wall perpendicular
to the floor.
Should use a special wall mount, if you want to install it
to ceiling or slanted wall.
The surface that wall mount is to be mounted on should
be of sufficient strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hollow block.
Installing screw type and length depends on the
wall mount used. Further information, refer to the
instructions included with the mount.
LG is not liable for any accidents or damage to property
or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may
cause TV to fall and cause personal injury.
- Not following the recommended Installation method.
Model VESA
(A * B)
Standard
Screw Quantity
32LE5*** 200 *100 M4 4
42LE5*** 200 *200 M6 4
■
■
■
►
►
►
►
►
10cm
10cm
10cm
10cm
Power Supply
Circuit breaker
10cm
10cm
10cm
10cm
10cm
A
B
10cm
10cm
10cm
10cm
10cm
A
B

GB-15
PREPARATION
KENSINGTON SECURITY
SYSTEM
This feature is not available for all models.
Image shown may differ from your TV.
The TV is equipped with a Kensington Security System connector
on the back panel. Connect the Kensington Security System cable
as shown below.
For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
For further information, contact http://www.kensington. com,
the internet homepage of the Kensington company. Kensington
sells security systems for expensive electronic equipment such as
notebook PCs and LCD projectors.
NOTE
The Kensington Security System is an optional accessory.
If the TV feels cold to the touch, there may be a small
“flicker” when it is turned on. This is normal, there is
nothing wrong with TV.
Some minute dot defects may be visible on the screen,
appearing as tiny red, green, or blue spots. However, they
have no adverse effect on the monitor’s performance.
Avoid touching the LCD screen or holding your finger(s)
against it for long periods of time. Doing so may produce
some temporary distortion effects on the screen.
■
■
►
►
►
►
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components to fix the TV
safety and secure to the wall on the market.
Position the TV close to the wall to avoid the possibility of
it falling when pushed.
The instructions shown below are a safer way to set up
the TV, by fixing it to the wall, avoiding the possibility of
it falling forwards if pulled. This will prevent the TV from
falling forward and causing injury. This will also prevent
the TV from damage. Ensure that
➊Use the eye-bolts or TV brackets/bolts to fix the product to the
wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen these bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them
securely in the upper holes.
➋Secure the wall brackets with the bolts on the wall. Match the
height of the bracket that is mounted on the wall.
➌Use a sturdy rope to tie the product for alignment. It is safer to
tie the rope so it becomes horizontal between the wall and the
product.
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to
support the size and weight of the TV.
To use the TV safely make sure that the height of the
bracket on the wall and on the TV is the same.
■
■
■
►
►
►
CABLEMANAGEMENT
AC IN
1
2
3
1
2
3

GB-16
EXTERNAL EQUIPMENT SETUP
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
This section mainly uses diagrams for the 32/42LD5** models.
Antenna Connection
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as
shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
■
■
■
■
■
■
EXTERNAL EQUIPMENT SETUP
CABLEMANAGEMENT
AC IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
USB IN
H/P
IN4
CABLEMANAGEMENT
AC IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
USB IN
H/P
IN4
CABLEMANAGEMENT
AC IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
USB IN
H/P
IN4
Satellite
Dish
Terrestrial
Antenna
Satellite RF Coaxial Cable (75 ohm)
Terrestrial RF Coaxial Cable (75 ohm)
CABLEMANAGEMENT
AC IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
USB IN
H/P
IN4
UHF
VHF
Signal
Amplifier
Terrestrial
Antenna

GB-17
EXTERNAL EQUIPMENT SETUP
To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment.
Image shown may differ from your TV.
HD RECEIVER SETUP
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals
from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a Component Cable
➊Connect the video outputs (Y, PB, PR) of the digital set top box to the
COMPONENT IN VIDEO jacks on the TV.
➋Connect the audio outputs of the digital set-top box to the COMPONENT IN
AUDIO jacks on the TV.
➌Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-
top box.)
➍Select Component input source using the INPUT button on the remote
control.
Signal Component HDMI
480i/576i O X
480p/576p O O
720p/1080i O O
1080p O
(50/60Hz only)
O
(24Hz/30Hz/50Hz/60Hz)
■
■
■
➊➋

GB-18
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI Cable
➊Connect the digital set-top box to HDMI/DVI IN 1,HDMI IN 2, HDMI IN 3 or HDMI IN 4 jack
on the TV.
➋Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
➌Select HDMI1,HDMI2, HDMI3 or HDMI4 input source using the INPUT button on the
remote control.
NOTE
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI
version 1.3, flickering or no screen display can result. Please use the latest cables that support
at least HDMI version 1.3.
HDMI Audio Supported format : Dolby Digital, PCM
(DTS Audio format is not supported).
Connecting with an HDMI to DVI Cable
➊Connect the digital set-top box to HDMI/DVI IN 1 jack on the TV.
➋Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.
➌Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
➍Select HDMI 1 input source using the INPUT button on the remote control.
►
►

GB-19
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Connecting with a Component Cable
➊Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN
VIDEO jacks on the TV.
➋Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks
on the TV.
➌Turn on the DVD player, insert a DVD.
➍Select Component input source using the INPUT button on the remote
control.
➎Refer to the DVD player’s manual for operating instructions.
Component Input Ports
To achieve better picture quality, connect a DVD player to the component input
ports as shown below.
Component ports on the TV Y PB PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Connecting the HDMI Cable
➊Connect the HDMI output of the DVD to the HDMI/DVI IN 1, HDMI IN 2, HDMI IN 3 or
HDMI IN 4 jack on the TV.
➋Select HDMI1, HDMI2, HDMI3 or HDMI4 input source using the INPUT button on the
remote control.
➌Refer to the DVD player’s manual for operating instructions.
NOTE
The TV can receive video and audio signals simultaneously when using a HDMI cable.
If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI
version 1.3, flickering or no screen display can result. Please use the latest cables that
support at least HDMI version 1.3.
►
►
►
➊
➊➋