LG 32LS3800-TC.SFCWLJK User manual

User Guide
This is a 「User Guide」 installed on the TV.
The contents of this guide are subject to change without prior notice for quality
improvement.

GP2

 
 
 

 
 

 




GP2
kor
❐Automatically Setting Up Programme
SETTINGS ➾ SETUP ➙Auto Tuning
Automatically tunes the programmes.
1 Select Country where the TV is used. Programme settings change depending
on the country you choose.
2 Initiate Auto Tuning.
3 Select Input Source of your choice.
4 Set Auto Tuning following screen instructions.
✎If Input Source is not connected properly, programme registration may not
work.
✎Auto Tuning only finds programmes that are currently broadcasting.
✎If Lock System is turned on, a pop-up window will appear asking for
password.

GP2
kor
❐To use Manual Tuning
SETTINGS ➾ SETUP ➙ Manual Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be checked.

GP2
kor
❐To edit programmes
SETTINGS ➾ SETUP ➙ Programme Edit
Edits the saved programmes.
Set as favourite programme, block/unblock programme, skip programme etc. of
the selected programme.

GP2
eng
Press TEXT button.
[depending on the country]
Teletext is a free service provided by the TV station that offers text-based
information about TV programmes, news and weather.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems.
• Colour button: To select the preceding or following page.
• Number button: Enters the desired page number.
• ꔵ: To select the preceding or following page.

GP2
eng
❐Special Teletext Function
Press T. OPT button.
Select the Text Option menu.
• ꔻIndex : Select each index page.
• ꔾTime : When viewing a TV programme, select this menu to display the
time at the top right hand corner of the screen.
• ꕀHold : Stops the automatic page change which will occur if a teletext
page consists of 2 or more sub pages.

GP2
eng
• ꔽReveal : Select this menu to display concealed information, such as
solutions to riddles or puzzles.
• ꔼUpdate : Displays the TV picture on the screen while waiting for a new
teletext page.
• Language [In Digital Mode Only] : Sets Teletext language.

GP2
eng
SETTINGS ➾ OPTION ➙ Data Service
[Depending on country]
This function allows users to choose between MHEG (Digital Teletext) and Teletext
if both exist at the same time.
If only one of them exists, either MHEG or Teletext is enabled regardless of
which option you selected.

GP2
eng
SETTINGS ➾ PICTURE ➙ Aspect Ratio
Selects the screen aspect ratio.
• 16:9: Resizes images to fit the screen width.
• Just Scan: Displays video images in the original size without removing parts
of the edge of the image.
✎ In DTV, Component, HDMI, and DVI (over 720p) mode, Just Scan is
available.
• Original: When your TV receives a wide screen signal it will automatically
change to the picture format broadcasted.