LG UN34 Series User manual

INSTALLATION MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for
future reference.
LN34*
UN34*
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
*MFL71970601*
(2302-REV02)

2
ENGLISH
Table of contents
4 Location and Function of Controls
4 Parts and Button
4 Basic functions
5 First Use Wizard
6 Basic Settings
6 - Language & Location
7 - Network Settings
8 - Portal Settings
9 - Voice Service Coverage
10 Data Cloning
10 Solution Settings
10 - Language & Location selection
11 - TV Configuration Options
14 - Configure Pro:Centric Server
15 - Standard Pro:Centric Server Settings
20 - Installation Code Settings
22 Installation Menu Settings
23 Installation Menu
23 Introduction
24 Public Display Settings
24 - Power On Status
25 - Volume
25 - Key Management
26 - Limited Mode
27 - DTV Channel Update
27 - Power On Default
27 - Aux Source Setting
27 - Power Management
27 - Factory Reset
28 Network
28 - MAC Address
28 - Network Setting
29 - IP Stream Control
29 - Wake On LAN
29 - Server Setting
29 - Ping Test
30 Pro:Centric
30 - Server Type
30 - Type
30 - Installation Code
30 - Mode
30 - Update Event
31 - Room Number Setting
31 - Media Type
31 - Receive Data
32 General
32 - Configuration Setup
37 - External Speaker
37 - Audio Line Out
38 - Set ID Setup
38 - Power Saving
39 - HCEC Setup
40 - Clock Setup
41 - Welcome Video Mode
41 - Crestron
42 - Developer Mode
42 - Security
43 Portal Settings
43 - Portal Mode
43 - Auto Start
43 - PreLoaded App
44 - Website Shortcut
44 - Input Shortcut
45 - Hotel Directory
45 - Portal Editor
47 - Portal Manager
49 Media Share
49 - SmartShare
49 - Screen Share
49 - LG Presenter
49 - Media Renderer
49 - DIAL
49 - Device Name
50 - SoftAP
51 - Beacon
52 TV Manager
52 - Diagnostics
58 - Data Cloning
60 - USB Download Menu

3
ENGLISH
62 IR Codes
63 External control device Setup
63 RS-232C Setup
63 Phone jack Type
63 Type of Connector : D-Sub 9-Pin Male
64 RS-232C Configurations
64 Communication Parameters
64 IR OUT Using Guide
64 - Suitable / Not Recommend remote-controller data
format
64 - IR Receiver specifications
65 Command Reference List
65 Transmission / Receiving Protocol

4
ENGLISH
Location and Function of Controls
Parts and Button
Basic functions
Power On (Press)
Power O1(Press and Hold)
Menu Control (Press2)
Menu Selection (Press and Hold3)
1 All running apps will close.
2 You can access and adjust the menu by pressing the button whenTV is on.
3 You can use the function when you access menu control.

5
ENGLISH
First Use Wizard
* Image shown may differ from your TV.
(Depending on model)
•There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by START
button.
(Normal Conguration is the default focus item.)

6
ENGLISH
Basic Settings
* Image shown may differ from your TV.
This menu is for Basic Settings related to language, network, portal, voice service coverage and channel tuning without SI (Pro:Centric) setting.There
are four steps for it.
Language & Location
(Depending on model)
•Select the Language and Country. Some countries need to select the Time Zone.

7
ENGLISH
Network Settings
(Depending on model)
•Set Network connection. You can connect easily to wired/wireless network. (”Network”on page 28)
Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW. (SSID : lgwebostv, PW : procentric, Security : WPA/WPA2 PSK)

8
ENGLISH
Portal Settings
(Depending on model)
•Set the Portal Mode and Portal Auto Start.
Portal Mode
(Depending on model)
•You can select‘Default Portal’(Use webOS default portal), ‘Customizable Portal’(Use editable Portal), or‘None’(Do not use portal).
Portal Auto Start
•You can select‘On’or‘O’. If you select‘On’, Portal (Home Launcher) will be execute automatically afterTV on.

9
ENGLISH
Voice Service Coverage
(Depending on model)
•Set the voice service coverage. You can set LG Service Country and Service Area Postcode for voice service.

10
ENGLISH
Data Cloning
(Depending on model)
Access Data cloning menu ofTV Manager application for applying cloning le.
Solution Settings
(Depending on model)
The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain“procentric.local”and IP Server
Address are needed to be registered in DNSTV will contact the IP Server using the default Domain“procentric.local”via IP on server search page. IfTV
doesn’t contact the Server, TV will search the pre-dened channel earlier than all channels.
Language & Location selection
(Depending on model)
•Please select the Language and Country. Some countries need to select the Time Zone.

11
ENGLISH
TV Conguration Options
(Depending on model)
1 From theTV Conguration Options screen, you can choose how to proceed with the conguration of thisTV. Whether you will congure theTV for
Pro:Centric operation via the wizard or use a USB memory device to congure theTV, you may rst wish to set the Room Number on the TV. Also,
you can congure the network environment.
•Complete initial download of maintenance(On/O Toggle): you can choose the option whether to skip the maintenance les download during
the EZ-Manager process.
•If you intend to set Room Number as part of the TV conguration, use the Room Number option to assign the Room # for thisTV before you
continue with additional conguration.
•In the Label eld, use the Left/Right arrow keys to specify a North, South, East, or West designation for this TV.
•In the Room Number eld, you can use the number keys on the Installation Remote to direct enter a room number or use the virtual keyboard on
the TV screen.

12
ENGLISH
•If you intend to apply the les via USB, use USB Conguration option to access TV Manager app. (“TV Manager”on page 52)
•If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (”Network”on
page 28)
Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW. (SSID : lgwebostv, PW : procentric, Security : WPA/WPA2 PSK)

13
ENGLISH

14
ENGLISH
Congure Pro:Centric Server
(Depending on model)
You can select two options.
•Standard Pro:Centric Server Settings : Default Automatic / Manual Pro:Centric Server Conguration
•Installation Code Settings : Installation Code based simple installation for Cloud solution

15
ENGLISH
Standard Pro:Centric Server Settings
(Depending on model)
Automatically for Setup
1 This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data programme, select the Next.

16
ENGLISH
2 Downloading the Pro:Centric application les takes few minutes.
3 After the installation is completed, the following screen will be displayed.

17
ENGLISH
Manually for Setup
1 Please select the Manual Pro:Centric.
2 Congure the appropriate Pro:Centric settings in the TV. (Taiwan does not support RF)

18
ENGLISH

19
ENGLISH
3 Downloading the Pro:Centric application les takes few minutes.
4 After the installation is completed, the following screen will be displayed.

20
ENGLISH
Installation Code Settings
(Depending on model)
From the Installation Code Settings screen,You can input the installation code that issued from Cloud Portal.
1 Server Searching
LG Pro:Centric Cloud
•Server search succeed : The message“Server Found [property name]”is displayed. And the search button changes to the next button.
•In case of invalid code :The message“Invalid Installation Code”is displayed.
•In case of network error :The message“Server Not Found”is displayed.