LG 29EB93 User manual

www.lg.com
Owner's Manual
IPS LED MONITOR
(LED LCD MONITOR)
29EA93
29EB93
Please read the safety information carefully before using the product.
IPS LED Monitor (LED LCD Monitor) Model List
ENGLISH

2
ENG
ENGLISH
Contents
3LICENSE
4ASSEMBLING AND
PREPARING
4Product Components
5Component and Button Description
7Moving and Lifting the Monitor
7Installing the Monitor
7- Assembling the stand base
9- Detaching the stand base
11 - Installing onto a table
12 - Adjusting the stand height
13 - Adjusting the angle
14 - Tidying cables
15 - Using the Kensington lock
15 - Installing the wall mount plate
16 - Installing to a wall
17 USING THE MONITOR
17 Connecting to a PC
17 - DVI connection
18 - Display port connection
19 - HDMI connection
20 Connecting to AV Devices
20 - HDMI connection
21 Connecting to External Devices
21 - Smartphone (MHL) connection
22 - USB cable-PC connection
23 - Headphone port connection
24 INSTALLING TUSB3410
DRIVER
25 INSTALLING TRUE COLOR
FINDER
27 INSTALLING SCREEN SPLIT
29 CUSTOMIZING SETTINGS
29 Activating the Main Menu
30 Customizing settings
30 - Menu Settings
31 - Ratio Settings
32 - Func. Settings
33 - PIP settings
34 - Picture
35 - Color
36 - Settings
37 TROUBLESHOOTING
39 SPECIFICATIONS
40 Factory support mode
(Preset Mode, DVI-D/HDMI/PC Display
Port)
40 HDMI/MHL Timing (Video)
40 Power Indicator
41 PROPER POSTURE
41 Proper Posture for Using the Monitor

3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
VESA, VESA logo, Display Port Compliance Logo and Display Port
Compliance Logo for dual-mode source are all registered trademarks of the
Video Electronics Standards Association.

4
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to im-
prove the performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the
retail store where you purchased the product.
CAUTION
NOTE
Power Cord
Cable Tie
Audio Cable A-B Type USB 3.0 Cable
or
User Manual/Card
Stand Base Stand Base
Stand Body
Screw Cover
Two Screws
AC/DC Adapter DVI-D Dual Cable
MHL Signal Cable
29EA93 29EB93

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Component and Button Description
DVI-D IN
DP IN HDMI 1 HDMI 2/MHL
USB IN 1 USB IN 2 USB IN 3
H/PAUDIO IN(PC)USB UP
5 V 0.9 A
5 V 0.9 A
DC-IN (19.5 V )
Power Indicator
yOn: power is on
yOff: power is off
Touch buttons on the bottom
of the monitor
Ports
(Power Button)
29EA93

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
DVI-D IN
DP IN HDMI 1 HDMI 2/MHL
USB IN 1 USB IN 2
USB IN 3 H/P
AUDIO IN(PC)
USB UP
5 V 0.9 A
5 V 0.9 A
DC-IN (19.5 V )
Power Indicator
yOn: power is on
yOff: power is off
Touch buttons on the bottom
of the monitor
Ports
(Power Button)
29EB93

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Installing the Monitor
Assembling the stand base
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
3Fix two screws into the back of the stand base
and close the screw cover.
2Check the orientation (front and rear) of the
stand base and mount the stand base to the
stand hinge as shown in the figure.
Stand Base
Stand Base
Stand Hinge
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
yAs far as possible, avoid touching the moni-
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
CAUTION
yIt is advisable to place the monitor in the
original box or packing material before at-
tempting to move it.
yBefore moving or lifting the monitor, discon-
nect the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should
face away from you to prevent it being
scratched.
yWhen moving the monitor, avoid any strong
shock or vibrations to the product.
yWhen moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
1Place the screen face down.
29EA93

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
Stand Base
1Place the screen face down.
29EB93 3Insert the stand base into the hook of the
stand body.
4Fix by turning the screw to the right with a coin.
Stand Body
Stand Body
2Put the stand body on the monitor aligning
with holes for fixing screws and fix two screws
to the holes to assemble the stand body and
the monitor together.

9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Detaching the stand base
2Open the screw cover on the back of the stand
base and use a screwdriver to remove the two
screws.
Detach the stand base from the stand hinge
as shown in the figure.
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
Stand Base
Stand Hinge
yThe components in the illustrations may dif-
fer from the actual product.
yDo not carry the monitor upside down, as this
may cause it to fall off its stand and result in
damage or injury.
yTo avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
CAUTION
1Place the screen face down.
29EA93

10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Stand Base
Stand Body
Stand Body
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
1Place the screen face down.
29EB93
yThe components in the illustrations may dif-
fer from the actual product.
yDo not carry the monitor upside down, as this
may cause it to fall off its stand and result in
damage or injury.
yTo avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
CAUTION
2Turn the screw to the left using a coin.
Detach the stand base.
1
2
3Remove the two screws from the stand body.