LG L200WJ-BF.AEU User manual

Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and quote this information to your
dealer hen you require service.
L200WJ
User’s Guide

1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Important Precautions

2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.

3
Connecting the Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
Connecting with DVI-Analog signal input cable
Connecting with DVI-Digital signal input cable
2. Use a ter connecting power cable to AC-DC power adapter and
inserting it into outlet(Voltage is automatically controlled.)
When connecting
to a wall concent
When connecting to a PC
3
1
2AC/DC
adapter
A
B
1
23
A
B
Product color represented here may di er rom actual product color that customer purchased.
Tip

4
Connecting the Display
. Touch button on the ront switch panel to
turn the power on. When monitor power is
turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)
NOTE
‘ Self Image Setting Function ? This unction provides the user with optimal display
settings.When the user connects the monitor or the irst time, this unction automatically
adjusts the display to optimal settings or individual input signals. Press Adjust Forte
Manager Program
--> Picture --> Tracking --> Auto Setup i screen adjustment is needed
while using the product or i you want to operate this unction manually, or, run Options o
Forte Manager Program
--> Preset Provided When Delivered.
Otherwise, you may execute the ‘Factory Default Preset option on the OSD adjustment
menu. However, be aware that this option initializes all the menu items except
‘LANGUAGE’.
To adjust angle of the product ~ ~
Adjust location o head section com ortable to use.
Tilt Range : 0˚~20˚
Do not put your hand ( inger) between head section and stand section when adjusting angle o screen.
Your hand ( inger) may get caught or wounded.
Head section
Stand section

5
Install Forte Manager program.
This so tware requires Microso t Internet Explorer 6.0 or greater.
1) Close all other applications be ore installing Forte Manager program.
2) Installation screen appears automatically when Forte Manager CD-ROM is inserted.
3) Forte Manager Install Shield Wizard start screen appears.
4) Select [Installation Language].
5) Click "Next" when Installation Wizard screen appears.
6) Click "Next" a ter selecting "I accept the terms o the license agreement."
7) Click "Next" a ter selecting a unction to install.
8) Click "Install."
9) Installation status screen appears.
10) Click "Finish" a ter selecting "Yes, I want to restart my computer now."
11) Forte Manager execution icon is created on background screen when installation is
completed.
Forte Manager Program Installation Procedure
Tip
Tip
*Select [Execution] a ter pressing [Start] button when installation screen does not appear automatically.
**Select OK a ter entering D: /SETUP.EXE (assumed CD-ROM Drive is D:.)
This product provides a program(Forte Manager CD) which makes
users convenient to adjust various screen conditions including
Brightness, Tracking or Resolution by using mouse, without adjusting
each button.
To use monitor with the best quality~ ~
Install Users Guide CD monitor driver ile provided with accessories.
* Please re er to 'Monitor Driver Installation Guide' to install monitor driver.

6
Install Forte Manager program.
Forte Manager Program Function
PICTURE
- Tracking, Brightness, Contrast , Position, Resolution , Sharpness,
Wizard, Preset
f-Engine
- MOVIE, TEXT, NORMAL, USER, Preset
Color
- Color Temp. RGB, Color Calibration, Preset
Options
- Pre erences, Power Indicatort, Preset
Support
- Update, Help, Asset Id, Version, Preset
To change or adjust Tracking, Brightness, Contrast, Position, Resolution,
Sharpness or Preset o Display, use or select Forte Manager program.
*Tracking and Position are supported only when signal is in analog mode.

7
Control Panel Functions
Front Panel Controls
Control Function
Power Button
Product may be turned on when you touch the button,
and turned o when you touch it once again.
Power Indicator
Power Indicator is red when the product is on and it
automatically repeats rom dark to bright mode in Sleep
mode (Energy Saving).
The button underneath the picture is or adjusting
brightness o Power Indicator.
* Four-grade brightness adjustment is possible by lightly
touching with a inger.
NOTE
To turn on/off the power indicator manually ~ ~
Select Options o Forte Manager Program -> Power Indicator -> On/O to manually turn
on/o the power indicator.
Power Button is not operated be ore Display is completely exhibited.

8
DDC/CI ON/OFF Function
DDC/CI ON/OFF Function
Display is on when Power button is touched,
and DDC/CI is ON/OFF when Power button is
touched more than a ew seconds.
* Initial Setup Status is DDC/CI ON.
DDC/CI(Display Data Channel Command Interface) is communication
protocol for communications between PC and monitor.
DDC/CI makes it possible to adjust and setup detailed functions on PC
instead of the monitor OSD.
Monitor can be adjusted with PC by connecting communication between
PC and monitor when DDC/CI is ON, and monitor cannot be adjusted
with PC because communication between PC and monitor is
disconnected when DDC/CI is OFF.
NOTE
However, DDC/CI unction is operated only once when Display is on, and it is
not operated when Display is turned o by touching Power button.
Tip
Especially, Forte Manager program must be operated in DDC/CI ON status
because it does not operate normally in DDC/CI OFF status.

9
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
󱅙󱅙Is the power cord of the
display connected?
󱅙󱅙Does power indicator
from dark to bright
mode is repeated?
󱅙󱅙Do you see an "OUT
OF RANGE" message
on the screen?
󱅙󱅙Do you see a "CHECK
SIGNAL CABLE
"message on the
screen?
•Check and see i the power cord is connected
properly to the power outlet.
•I the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard
to bring up the screen.
•Try to turn on the PC.
•This message appears when the signal rom the
PC (video card) is out o horizontal or vertical
requency range o the display. See the
'Speci ications' section o this manual and
con igure your display again.
•This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.

10
Troubleshooting
Display image is incorrect
󱅙󱅙Display Position is
incorrect.
󱅙󱅙On the screen
background, vertical bars
or stripes are visible.
󱅙󱅙Any horizontal noise
appearing in any image or
characters are not clearly
portrayed.
󱅙󱅙The screen color is mono
or abnormal.
󱅙󱅙The screen blinks.
•Press adjust o Forte Manager Program --> Picture
--> Tracking-->Auto Setup to adjust screen
automatically to the optimal condition, which its to the
current mode.
Con igure by directly adjusting adjust o Forte
Manager Program --> Picture--> Position i
adjusted condition is dissatis actory
•Press adjust o Forte Manager Program --> Picture
--> Tracking-->Auto Setup to adjust screen
automatically to the optimal condition, which its to the
current mode.
Remove vertical lines by adjusting adjust o
Forte Manager Program --> Picture -->
Tracking -->Clock, i adjusted condition is
dissatis actory.
•Press adjust o Forte Manager Program --> Picture
--> Resolution --> Preferred to adjust screen
automatically to the optimal condition, which its to the
current mode.
Adjust by selecting adjust o Forte Manager
Program --> Picture --> Tracking -->
Phase i adjusted condition is dissatis actory.
• Check Control Panel --> Display --> Settings and
see i the requency or the resolution were changed. I
yes, readjust the video card to the recommend
resolution.
•Check Control Panel --> Display --> Settings and
adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).
•Check i the signal cable is properly connected and
use a screwdriver to asten i necessary.
•Make sure the video card is properly inserted in the
slot.
•Set the color setting higher than 24 bits (true color) at
Control Panel --> Settings.
•Check i the screen is set to interlace mode and i yes,
change it to the recommend resolution.

Troubleshooting
11
Have you installed the display driver?
󱅙󱅙Have you installed the
display driver?
󱅙󱅙Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
•Be sure to install the display driver rom the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver rom our web site: http://www.lge.com.
•Make sure to check i the video card supports
Plug&Play unction.

12
Speci ications
NOTE
Information in this document is subject to change without notice.
20.1 inches (51.11cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
20.1 inches viewable
0.258mm pixel pitch
Horizontal Freq. 30 - 83kHz (Analog)
30 - 83kHz (Digital)
Vertical Freq. 56 - 75Hz (Automatic)
Input Form Separate TTL,
Positive/Negative
Digital(HDCP)
Signal Input DVI - Analog connector
DVI - Digital connector
Input Form
RGB Analog (0.7Vp-p/75ohm), Digital
Max DVI Digital: VESA 1680 x 1050@60Hz
DVI Analog: VESA 1680 x 1050@60Hz
Recommend VESA 1680 x 1050@60Hz
DDC 2B
On Mode : 45W( Typ.)
Sleep Mode ≤2W
Off Mode
≤1W
Width
47.63 cm / 18.75inches
Height 40.15 cm / 15.81 inches
Depth 14.84 cm / 5.84 inches
Net 6.30 kg (13.89 lbs)
Tilt
0˚~20˚
12V 3.5A
LienChang, LCAP08F
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached( O ), Detachable ( )
Wall-outlet type or PC-outlet type
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Til tRange
Power Input
AC/DC Adapter
Environmental
Conditions
Tilt Stand
Power cord

13
Speci ications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
*12
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 1050
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.290
Indicator
On Mode
Sleep Mode
O Mode
Red
From dark to bright mode is repeated
O
LED Color
MODE
* Recommend Mode
70
60
75
60
75
60
75
75
60
75
60
60

14
Speci ications
Kensington Security
Kensington Security Slot
Connected to a locking
cable that can be purchased
separately at most computer
stores
Product color represented here may di er rom actual product color that
customer purchased.
Tip

Digitally yours