LG E2391VR User manual

www.lg.com
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODELS
ENGLISH
E2391VR

2
ENG
ENGLISH
TABLE OF CONTENTS
CONTENTS
3 ASSEMBLINGANDPREPAR-
ING
3 Unpacking
4 Partsandbuttons
6 SettinguptheMonitorset
6 - Mountingonatable
8 USINGTHEMONITORSET
8 ConnectingtoaPC
8 - D-SUBconnection
9 - HDMIconnection
9 - DVItoHDMIconnection
10 CUSTOMIZINGSETTINGS
10 AccessingTheMainMenus
11 CustomizingSettings
11 - MenuSettings
13 - DUALMONITORSettings
13 - DUALWEBSettings
14 - SUPER+RESOLUTIONSettings
14 - VolumeSettings(Onlysupportedin
HDMImode)
15 - SUPERENERGYSAVINGSettings
16 TROUBLESHOOTING
18 SPECIFICATIONS
19 PresetModes(Resolution)
19 - PC(D-SUB/HDMI)Timing
19 - HDMITiming
19 Indicator
20 PROPERPOSTURE
20 ProperpostureforusingtheMonitorset.

3
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLINGANDPREPARING
Unpacking
Checkyourproductboxforthefollowingitems.Ifthereareanymissingaccessories,contactthelocal
dealerwhereyoupurchasedyourproduct.Theillustrationsinthismanualmaydifferfromtheactualproduct
andaccessories.
 Donotuseanyunapprovedaccessoriestoensurethesafetyandproductlifespan.
 Anydamagesorinjuriesbyusingunapprovedaccessoriesarenotcoveredbythewarranty.
 Theaccessoriessuppliedwithyourproductmayvarydependingonthemodel.
 Productspecificationsorcontentsinthismanualmaybechangedwithoutpriornoticeduetoupgrade
ofproductfunctions.
 Usershoulduseshieldedsignalinterfacecables(RGBcable)withferritecorestomaintainstandard
compliancefortheproduct.
CAUTION
NOTE
CD(Owner'sManual)/
Card
D-SUBCable
(Thissignalcablemaybeattached
tothisproductbeforeshippingout.)
HDMItoDVICable
(Thiscableisnotincludedinall
countries.)
PowerCord AC-DCAdapter

4
ENG
ENGLISH
ASSEMBLING AND PREPARING
HDMID-SUB
DC-IN /
䏳㵎幑‣
Partsandbuttons
PowerIndicator
 LightingOn:Turnedon
 LightingOff:Turnedoff
Connectionpanel(Seep.8)
(PowerButton)
HDMI
D-SUBDVI-D
DC-IN /
䏳㵎幑‣
D-SUBDVI-D
DC-IN /
䏳㵎幑‣
D-SUB
DC-IN /
䏳㵎幑‣
Button(Seep.10)

5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Button Description
MENU Accesses the main menus.(See p.11)
Left First Button OSD LOCKED/
UNLOCKED
This function allows you to lock the current control settings, so
that they cannot be inadvertently changed.
Press and hold the left first button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the left first button for several seconds. The message "OSD
UNLOCKED" should appear.
SUPER+ RESOLUTION Use this button to enter SUPER+ RESOLUTION menu. For more information.(See p.14)
SUPER ENERGY SAVING Use this button to enter SUPER ENERGY SAVING menu.
For more information.(See p.15)
AUTO When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only supported in Analog Mode)
The best display mode : 1920 x1080
VOLUME (Only HDMI mode) Adjust the volume of the Monitor set.(See p.14)
INPUT You can choose the input signal.
yWhen two input signals are at least are connected, you can select the input signal
(D-SUB/HDMI) you want.
yWhen only one signal is connected, it is automatically detected. The default setting is
D-SUB.
EXIT Exit the OSD(On Screen Display).
(Power Button) Turns the power on or off.
Power Indicator The power indicator stays white color if the display is running
properly (On Mode). If the display is in Sleep Mode, the power
indicator color is red.

6
ENG
ENGLISH
ASSEMBLING AND PREPARING
3 PressPowerbuttonontheStandbaseofthe
MonitorsettoturnthepowerON.
Mountingonatable
1 LiftandtilttheMonitorsetintoitsupright
positiononatable.
Leavea10cm(minimum)spacefromthewall
forproperventilation.
10 cm
10 cm
10 cm
10 cm
Disconnectthepowercordfirst,andthenmove
orinstalltheMonitorset.Otherwiseelectric
shockmayoccur.
CAUTION
2 ConnecttheAC-DCAdapterandPowerCord
toawalloutlet.
DC-IN /
䏳㵎幑‣
DC-IN /
䏳㵎幑‣
SettinguptheMonitorset
Whenyouadjusttheangle,donotholdthe
bottomoftheMonitorsetframeasshownon
thefollowingillustration,asmayinjureyour
fingers.
Donottouchorpressthescreenwhen
adjustingtheangleofthemonitor.
WARNING
Tiltfrom+12to-5degreesupordowntoadjust
theangleoftheMonitorsettosuityourview.
NOTE
Front Rear
12- 5

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
UsingtheKensingtonsecuritysystem
TheKensingtonsecuritysystemconnectoris
locatedatthebackoftheMonitorset.Formore
informationofinstallationandusing,refertothe
manualsuppliedwiththeKensingtonsecurity
systemorvisit http://www.kensington.com .
ConnecttheKensingtonsecuritysystemcable
betweentheMonitorsetandatable.
TheKensingtonsecuritysystemisoptional.
Youcanobtainitfrommostelectronicsstores.
NOTE

8
ENG
ENGLISH
USING THE MONITOR SET
H
DM
I
D-SUB
RGB OUT
DC-IN
/
䏳
㵎幑
‣
USING THE MONITOR SET
Connecting to a PC
 Your Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
 Mac adapter
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin high
density (3 row) D-SUB VGA connector on the
supplied cable to a 15 pin 2 row connector.
 When using a D-Sub signal input cable
connector for Macintosh
NOTE
 Connect the signal
input cable and tighten
it by turning the screws
clockwise.
 Do not press the screen
with your finger for a
long time as this may result in temporary
distortion on the screen.
 Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
CAUTION

9
ENG
ENGLISH
USING THE MONITOR SET
 "SelfImageSetting"Function.
Thisfunctionprovidestheuserwithoptimal
displaysettings.Whentheuserconnects
themonitorforthefirsttime,thisfunction
automaticallyadjuststhedisplaytooptimal
settingsforindividualinputsignals.(Only
supportedinAnalogMode)
 ‘AUTO’Function.
Whenyouencounterproblemssuchas
blurryscreen,blurredletters,screenflicker
ortiltedscreenwhileusingthedeviceor
afterchangingscreenresolution,pressthe
AUTOfunctionbuttontoimproveresolution.
(OnlysupportedinAnalogMode)
NOTE
SelfImageSettingFunction
Pressthepowerbuttononthestandbaseofthe
Monitorsettoturnthepoweron.Whenmonitor
poweristurnedon,the"SelfImageSetting"
Functionisexecutedautomatically.(Only
supportedinAnalogMode)
 IfyouuseHDMIPC,itcancausecompatibility
problem.
 WhenyouwanttousetwoPCinourMonitor,
pleaseconnectthesignalcable(D-SUB/
HDMI)respectivelyinMonitorset.
 IfyouturntheMonitorsetonwhileitiscold,
thescreenmayflicker.Thisisnormal.
 Somered,green,orbluespotsmayappear
onthescreen.Thisisnormal.
NOTE
HDMIconnection
Transmitsthedigitalvideoandaudiosignalsfrom
yourPCorA/VtotheMonitorset.ConnectthePC
orA/VandtheMonitorsetwiththeHDMIcableas
showninthefollowingillustrations.
DVItoHDMIconnection
TransmitsthedigitalvideosignalfromyourPCto
theMonitorset.ConnectthePCandtheMonitor
setwiththeDVItoHDMIcableasshownthe
followingillustrations.
HDMI
D
-SUB
HDMI OUTHDMI OUT
DC-IN
/
䏳
㵎幑‣
DVI OUT
HDMI
D
-SUB
DC-IN
/
䏳
㵎幑
‣

10
ENG
ENGLISH
CUSTOMIZING SETTINGS
CUSTOMIZINGSETTINGS
AccessingTheMainMenus
1 PressanybuttononthestandbaseoftheMonitorsettodisplaytheMONITORSETUPOSDmenu.
2 Pressthedesiredmenuitem.
3 ChangethevalueofthemenuitembypressingthebuttonsonthestandbaseoftheMonitorset.
Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
4 SelectEXITtoleavetheOSDmenu.
StandbaseoftheMonitorsetButtons
MENU SUPER+
RESOLUTION
SUPER
ENERGY
SAVING
AUTO INPUTVOLUME EXIT
MONITOR SETUP
MENU(Seep.11)
Setsthescreenoptions.
AUTO(Seep.5)
Optimizestheresolution.
EXIT
ExitstheOSDmenu.
INPUT
Setstheexternalinput.
SUPER+RESOLUTION
(Seep.14)
SUPERENERGY
SAVING(Seep.15)
VOLUME(Seep.14)
Differentmenuitemsareenableddependingonthetypeofinputsignal.
NOTE
Menu SUPER+
RESOLUTION
SUPER
ENERGYSAVING
AUTO VOLUME INPUT EXIT
E2391VR ● ● ● ● - ● ●
E2391VR
(OnlyHDMIMode) ● ● ● - ● ● ●