LG IPS224TA User manual

www.lg.com
OWNER’S MANUAL
LED LCD MONITOR
IPS224T
IPS234T
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODEL
ENGLISH

ENG
ENGLISH
CONTENTS
3 ASSEMBLINGANDPREPAR-
ING
3 Unpacking
4 Partsandbuttons
5 SettinguptheMonitorset
5 - AttachingtheStandBase
5 - DetachingtheStandBase
6 - Mountingonatable
6 - Usingthecableholder
8 - Mountingonawall
9 USINGTHEMONITORSET
9  ConnectingtoaPC
9  - D-SUBconnection
9 - DVI-Dconnection
11 CUSTOMIZINGSETTINGS
12 CustomizingSettings
12 - MenuSettings
13 -PICTURE
14-COLOR
15-DISPLAY
15 -VOLUME
16 -OTHERS
17MY KEY  Setting
18- FUNC.Setting
19 TROUBLESHOOTING
20 SPECIFICATIONS 
21IPS224T
22IPS234T
23 PresetModes(Resolution)
23 Indicator
24 PROPERPOSTURE
24 ProperpostureforusingtheMonitorset.
2TABLE OF CONTENTS
19 - SUPER ENERGY SAVING
18- PICTURE MODE
20 - DUAL DISPLAY
20 - DUAL WEB
21 - MY KEY SETTING

ENG
ENGLISH
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
yDo not use any unapproved accessories to ensure the safety and product life span.
yAny damages or injuries by using unapproved accessories are not covered by the warranty.
yThe accessories supplied with your product may vary depending on the model.
yProduct specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
CAUTION
NOTE
Stand Body Stand Base
CD(Owner's Manual) /
Card
DVI-D Cable
(This cable is not included
in all countries.)
( Depending on the country ) ( Depending on the country )
Power Cord AC-DC Adapter AC-DC Adapter
or
D-SUB Cable
(This cable is not included
in all countries.)
3
ASSEMBLING AND PREPARING

ENG
ENGLISH
Partsandbuttons
4ASSEMBLING AND PREPARING
Power Indicator
yLighting On: Turned on
yLighting Off: Turned off
Connection panel (See p.9)
Button (See p.11)
(Power Button)

ENG
ENGLISH
AttachtheStandBodytothemonitorset.
AttachtheStandBase.
Tightenthescrewtotherightwithacoin.
SettinguptheMonitorset
AttachingtheStandBase
1 PlacetheMonitorsetwiththescreenside
downonaflatandcushionedsurface.
Layafoammatorsoftprotectivecloth
onthesurfacetoprotectthescreenfrom
damage.
CAUTION
2
StandBase
StandBody
1
2
3
DetachingtheStandBase
1 PlacetheMonitorsetwiththescreenside
downonaflatandcushionedsurface.
2
StandBase
StandBase
StandBody
StandBody
PullouttheStandBodyandStandBasefrom
themonitorset.
Turnthescrewtotheleftwithacoin.
PullouttheStandBase.
1
2
3
5
ASSEMBLING AND PREPARING

6
ENG
ENGLISH
Mountingonatable
1 LiftandtilttheMonitorsetintoitsupright
positiononatable.
Leavea10cm(minimum)spacefromthewall
forproperventilation.
Usingthecableholder
2 ConnecttheAC-DCAdapterandPowerCord
toawalloutlet.
3 Press (Power)buttononthebottomswitch
paneltoturnthepoweron.
10 cm
10 cm
10 cm
10 cm
Unplugthepowercordbeforemovingthe
Monitortoanotherlocation.Otherwiseelectric
shockmayoccur.
CAUTION
Cableholder
or
ASSEMBLING AND PREPARING

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
UsingtheKensingtonsecuritysystem
TheKensingtonsecuritysystemconnectoris
locatedatthebackoftheMonitorset.Formore
informationofinstallationandusing,refertothe
manualsuppliedwiththeKensingtonsecurity
systemorvisit
http://www.kensington.com .
ConnecttheKensingtonsecuritysystemcable
betweentheMonitorsetandatable.
TheKensingtonsecuritysystemisoptional.
Youcanobtainitfrommostelectronicsstores.
NOTE
Whenyouadjusttheangle,donotholdthe
bottomoftheMonitorsetframeasshownon
thefollowingillustration,asmayinjureyour
fingers.
Donottouchorpressthescreenwhen
adjustingtheangleofthemonitor.
Donotholdthissetlikebelowpicture.Monitor
screencandetachfromstandbaseandinjure
yourbody.
WARNING
Tiltfrom+20to-5degreesupordowntoadjust
theangleoftheMonitorsettosuityourview.
NOTE
Front Rear

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mountingonawall
Forproperventilation,allowaclearanceof10cm
oneachsideandfromthewall.Detailed
instructionsareavailablefromyourdealer,seethe
optionalTiltWallMountingBracketInstallationand
SetupGuide.
IfyouintendtomounttheMonitorsettoawall,
attachWallmountinginterface(optionalparts)to
thebackoftheset.
WhenyouinstalltheMonitorsetusingawall
mountinginterface(optionalparts),attachit
carefullysoitwillnotdrop.
1Please,Usethescrewandwallmountinterface
inaccordancewithVESAStandards.
2Ifyouusescrewlongerthanstandard,the
monitormightbedamagedinternally.
3Ifyouuseimproperscrew,theproductmightbe
damagedanddropfrommountedposition.In
thiscase,LGElectronicsisnotresponsiblefor
it.
4VESAcompatible.
5PleaseuseVESAstandardasbelow.
 784.8mm(30.9inch)andunder
*WallMountPadThickness:2.6mm
*Screw:Φ4.0mmxPitch0.7mmx
Length10mm
 787.4mm(31.0inch)andabove
*PleaseuseVESAstandardwallmountpad
andscrews.
10 cm
10 cm
10 cm
10 cm
 Disconnectthepowercordfirst,andthen
moveorinstalltheMonitorset.Otherwise
electricshockmayoccur.
 IfyouinstalltheMonitorsetonaceilingor
slantedwall,itmayfallandresultinsevere
injury.
 UseonlyanauthorizedLGwallmount
andcontactthelocaldealerorqualified
personnel.
 Donotovertightenthescrewsasthismay
causedamagetotheMonitorsetandvoid
yourwarranty.
 Useonlyscrewsandwallmountsthat
meettheVESAstandard.Anydamages
orinjuriesbymisuseorusinganimproper
accessoryarenotcoveredbythewarranty.
 UsethescrewsthatarelistedontheVESA
standardscrewspecifications.
 Thewallmountkitwillincludeaninstallation
manualandnecessaryparts.
 Thewallmountbracketisoptional.Youcan
obtainadditionalaccessoriesfromyourlocal
dealer.
 Thelengthofscrewsmaydifferdepending
onthewallmount.Besuretousetheproper
length.
 Formoreinformation,refertothe
instructionssuppliedwiththewallmount.
CAUTION
NOTE
Model

VESA(AxB) 75x75
Standardscrew M4
Numberofscrews 4
IPS224T
IPS234T

9
ENG
ENGLISH
USINGTHEMONITORSET
ConnectingtoaPC
 YourMonitorsetsupportsPlug&Play*.
*Plug&Play:APCrecognizesaconnected
devicethatusersconnecttoaPCandturn
on,withoutdeviceconfigurationoruser
intervention.
D-SUBconnection
TransmitsanalogvideofromyourPCtothe
Monitorset.ConnectthePCandtheMonitorset
withthesuppliedD-sub15pinsignalcableas
showninthefollowingillustrations.
 Macadapter
ForAppleMacintoshuse,aseparateplug
adapterisneededtochangethe15pin
highdensity(3row)D-SUBVGAconnector
onthesuppliedcabletoa15pin2row
connector.
 WhenusingaD-Subsignalinputcable
connectorforMacintosh
NOTE
DVI-Dconnection
TransmitsadigitalvideosignalfromyourPCto
theMonitorset.ConnectthePCandtheMonitor
setwithaDVIcableasshowninthefollowing
illustrations.
USING THE MONITOR SET

10
ENG
ENGLISH
USING THE MONITOR SET
 WhenyouwanttousetwoPCinourMonitor,
pleaseconnectthesignalcable(D-SUB/
DVI-D)respectivelyinMonitorset.
 IfyouturntheMonitorsetonwhileitiscold,
thescreenmayflicker.Thisisnormal.
 Somered,green,orbluespotsmayappear
onthescreen.Thisisnormal.
 "SelfImageSetting"Function.
Thisfunctionprovidestheuserwithoptimal
displaysettings.Whentheuserconnects
themonitorforthefirsttime,thisfunction
automaticallyadjuststhedisplaytooptimal
settingsforindividualinputsignals.(Only
supportedinAnalogMode)
 ‘AUTO’Function.
Whenyouencounterproblemssuchas
blurryscreen,blurredletters,screenflicker
ortiltedscreenwhileusingthedeviceor
afterchangingscreenresolution,pressthe
AUTOfunctionbuttontoimproveresolution.
(OnlysupportedinAnalogMode)
NOTE NOTE
 Connectthesignal
inputcableandtighten
itbyturningthescrews
clockwise.
 Donotpressthescreenwithyourfingerfor
alongtimeasthismayresultintemporary
distortiononthescreen.
 Avoiddisplayingafixedimageonthe
screenforalongperiodoftimetoprevent
imageburn.Useascreensaverifpossible.
CAUTION SelfImageSettingFunction
Pressthepowerbuttononthebottompanelto
turnthepoweron.Whenmonitorpoweristurned
on,the"SelfImageSetting"Functionisexecuted
automatically.(OnlysupportedinAnalogMode)

11
ENG
ENGLISH
CUSTOMIZINGSETTINGS
1 PressthedesiredbuttononthebottomoftheMonitorset.
2 ChangethevalueofthemenuitembypressingthebuttonsonthebottomoftheMonitorset.
Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
3 SelectEXITtoleavetheOSDmenu.
MonitorsetButtons
Button Description
Accessesthemainmenus.(Seep.13)
OSDLOCKED/
UNLOCKED
Thisfunctionallowsyoutolockthecurrentcontrolsettings,so
thattheycannotbeinadvertentlychanged.
PressandholdtheMENUbuttonforseveralseconds.
Themessage"OSDLOCKED"shouldappear.
YoucanunlocktheOSDcontrolsatanytimebypushing
theMENUbuttonforseveralseconds.Themessage"OSD
UNLOCKED"shouldappear.
UsethisbuttontoenterMY KEYmenu.Formoreinformation.(Seep.17)
Whenadjustingyourdisplaysettings,alwayspresstheAUTObuttonontheMONITOR
SETUPOSD.(OnlysupportedinAnalogMode)
Thebestdisplaymode 1920x1080
Youcanchoosetheinputsignal.
• Whentwoinputsignalsareconnected,youcanselecttheinputsignal(D-SUB/DVI)
youwant.
• Whenonlyonesignalisconnected,itisautomaticallydetected.Thedefaultsettingis
D-SUB.
EXIT
ExittheOSD(OnScreenDisplay).
(PowerButton) Turnsthepoweronoroff.
PowerIndicator Thepowerindicatorstaysredifthedisplayisrunningproperly
(OnMode).IfthedisplayisinSleepMode,thepowerindicator
blinksred.
MENU MY KEY AUTO INPUT
EXIT
FUNC.
MY KEY
FUNC.
UsethisbuttontoenterPICTURE MODE,SUPER ENERGY SAVING,DUAL DISPLAY,
DUAL WEB,MY KEY SATTINGmenus.(Seep.18)
CUSTOMIZING SETTINGS

12
ENG
ENGLISH
CUSTOMIZING SETTINGS
CustomizingSettings
MenuSettings
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMENUOSD.
2 Settheoptionsbypressingthe◄or►or▼
buttons.
3 Selectthe"NEXTMENU"buttontoenterthemore
optionsettings.
4 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
MENU > NEXT MENU Analog Digital Description
PICTURE SHARPNESS ● ● To adjust the clearness of the screen .
COLOR GAMMA
● ● To customize the color of the screen
COLOR TEMP
SIX COLOR
COLOR RESET
DISPLAY HORIZONTAL ●To adjust the position of the screen
VERTICAL
CLOCK ●To improve the clarity and stability of the screen
PHASE
OTHERS LANGUAGE ● ● To customize the screen status for a user's operating
environment
POWER INDICATOR
WHITE BALANCE ●
●
●
Analog: D-SUB(Analog signal) input.
Digital: DVI-D(Digital signal) input.
MENU Analog Digital Description
BRIGHTNESS ● ● Toadjustthebrightness,contrastofthescreen
CONTRAST ● ●
WIDE/ORIGINAL
● ●
WIDE
Switchtofullscreenmodeaccordingtoinputimagesignal.
ORIGINAL
Changetheinputimagesignalratiotooriginal.
*ThisfunctionworksonlyifinputresolutionislowerthanMonitorsetratio
(16:9).
RESET ● ● Restoreallfactorydefaultsettings.Pressthe◄,►buttonstoreset
immediately.
MENU
EXIT
R
WIDE/ORIGINAL
RESET
CONTRAST
BRIGHTNESS
NO
NEXT MENU
1/2
70
100
1/2
WIDE
MENU >NEXT MENU >PICTURE
SHARPNESS 5
EXIT

13
ENG
ENGLISH
CUSTOMIZING SETTINGS
PICTURE
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMENUOSD.
2 Selectthe"NEXTMENU"buttontoenterthemore
optionsettings.
3 EntertoPICTUREbypressingthe▼button.
4 Settheoptionsbypressingthe◄or►or▼
buttons.
5 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
MENU>NEXTMENU>PICTURE Description
SHARPNESS Toadjusttheclearnessofthescreen.
MENU >NEXT MENU >PICTURE
SHARPNESS 5
EXIT

14
ENG
ENGLISH
CUSTOMIZING SETTINGS
COLOR
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMENUOSD.
2 Selectthe"NEXTMENU"buttontoenterthemore
optionsettings.
3 SelectCOLORbypressingthe►button.
4 EntertoCOLORbypressingthe▼button.
5 Settheoptionsbypressingthe◄or►or▼
buttons.
6 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
MENU > NEXT MENU > COLOR Description
GAMMA Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor,
high gamma values display whitish images and low gamma values display
blackish images.
COLOR TEMP CUSTOM
• RED:Set your own red color levels.
• GREEN: Set your own green color levels.
• BLUE: Set your own blue color levels.
Select the screen color.
WARM: Set the screen to warm color temperature (more red).
MEDIUM: Set the screen to medium color temperature.
COOL: Set the screen to cool color temperature (more blue).
SIX COLOR Sets and stores the hue and saturation for six colors(RED/ GREEN/BLUE/
CYAN/MAGENTA/YELLOW) to satisfy the color requirements of a user.
HUE Adjusts the screen hue.
SATURATION Adjusts the color sharpness on the screen. Lower values make
the color sharpness weaker and colors lighter while higher
values make the color sharpness stronger and colors dark.
COLOR RESET Resets the color settings to the factory default settings for the current
input device.
MENU >NEXT MENU >COLOR
GAMMA GAMMA 1 2/3
COLOR TEMP CUSTOM 1/4
RED 50
GREEN 50
BLUE 50
EXIT
MENU >NEXT MENU >COLOR
SIX COLOR RED 1/6
HUE 50
SATURATION 50
COLOR TEMP NO 1/2
EXIT

15
ENG
ENGLISH
CUSTOMIZING SETTINGS
DISPLAY
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMENUOSD.
2 Selectthe"NEXTMENU"buttontoenterthemore
optionsettings.
3 SelectDISPLAYbypressingthe►button.
4 EntertoDISPLAYbypressingthe▼button.
5 Settheoptionsbypressingthe◄or►or▼
buttons.
6 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
MENU>NEXTMENU>DISPLAY Description
HORIZONTAL Tomoveimageleftandright.
VERTICAL Tomoveimageupanddown.
CLOCK Tominimizeanyverticalbarsorstripesvisibleonthescreenbackground.The
horizontalscreensizewillalsochange.
PHASE Toadjustthefocusofthedisplay.Thisitemallowsyoutoremoveanyhorizontal
noiseandclearorsharpentheimageofcharacters.
MENU >NEXT MENU >DISPLAY
HORIZONTAL 50
VERTICAL 50
CLOCK 50
PHASE 50
EXIT

16
ENG
ENGLISH
CUSTOMIZING SETTINGS
OTHERS
1 PressMENUbuttononthebottomoftheMonitorset
todisplaytheMENUOSD.
2 Selectthe"NEXTMENU"buttontoenterthemore
optionsettings.
3 SelectOTHERSbypressingthe►button.
4 EntertoOTHERSbypressingthe▼button.
5 Settheoptionsbypressingthe◄or►or▼
buttons.
6 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
Eachoptionisexplainedbelow.
MENU>NEXTMENU>OTHERS Description
LANGUAGE Tochoosethelanguageinwhichthecontrolnamesaredisplayed.
POWER
INDICATOR
Usethisfunctiontosetthepowerindicatoronthebottomsideofthemonitorto
ONorOFF.IfyousetOFF,itwillgooff.
IfyousetONatanytime,thepowerindicatorwillautomaticallybeturnedon.
WHITE
BALANCE
Iftheoutputofthevideocardisdifferenttherequiredspecifications,thecolor
levelmaydeteriorateduetovideosignaldistortion.Usingthisfunction,the
signallevelisadjustedtofitintothestandardoutputlevelofthevideocardin
ordertoprovidetheoptimalimage.Activatethisfunctionwhenwhiteandblack
colorsarepresentinthescreen.
MENU >NEXT MENU >OTHERS
LANGUAGE ENGLISH 1/17
POWER INDICATOR ON 1/2
W
WHITE BALANCE NO 1/2
D-SUB 1920 X 1080 60HZ
EXIT

17
ENG
ENGLISH
CUSTOMIZING SETTINGS
MY KEYSetting
1 Press buttonon
thebottomoftheMonitorsettodisplaythe
MY KEYOSD.
2 Settheoptionsbypressingthe◄or►or▼buttons.
3 SelectEXITtoleavetheOSDmenu.
Each option is explained below.
MY KEY Description
MY KEY SETTING MY KEY is short key. You can select one of FUNC. (PICTURE MODE,
SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature.
BACK Select BACK to return MY KEY menu.
MY KEY
MY KEY >PICTURE MODE
EXIT
MY KEY SETTING
YOU CAN DESIGNATE A FEATURE IN "FUNC." AS "MY KEY".
TEXT PHOTO CINEMA GAME
CUSTOM
MY KEY >WHAT IS MY KEY
"MY KEY" IS A SHORT KEY
FOR QUICK ACCESS.
YOU CAN SAVE ONE OF "FUNC."
FEATURES AS FAVORITE.
GO TO "MY KEY SETTING" IN "FUNC."
MENU TO CHANGE FAVORITE SETTING.
MY KEY SETTING
BACK
EXIT

18
ENG
ENGLISH
CUSTOMIZING SETTINGS
FUNC.Setting
1 Press FUNC.buttonon
thebottomoftheMonitorsettodisplaythe
FUNC.OSD.
2 Enterto PICTURE MODEbypressingthe▼button.
3 Settheoptionsbypressingthe◄or►or▼
buttons.
4 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
EXIT
FUNC. >PICTURE MODE
TEXT PHOTO CINEMA GAME
CUSTOM
Eachoptionisexplainedbelow.
PICTUREMODE Description
CUSTOM Itisamodethattheusercanadjusteachelement.ItcanadjustthecolormodeoftheMainMenu.
TEXT Itisamodethatthescreenisadjustedtothebestforthetextworks.
PHOTO Itisamodethatthescreenisadjustedtothebesttoviewpictures.
CINEMA Itisamodethatthescreenisadjustedtothebesttoviewthevideos.
GAME Itisamodethatthescreenisadjustedtothebesttoplayagame.
PICTURE MODE

ENG
ENGLISH
CUSTOMIZING SETTINGS
1 Press FUNC.buttonon
thebottomoftheMonitorsettodisplaythe
FUNC.OSD.
2 Select bypressingthe►button.
3 Enterto bypressingthe▼button.
4 Settheoptionsbypressingthe◄or►or▼
buttons.
5 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
SUPER ENERGY SAVING
SUPER ENERGY SAVING
SUPER ENERGY SAVING
EXIT
FUNC. >SUPER ENERGY SAVING
ON OFF
YOU SAVED 0.00 TREES !!
POWER REDUCTION:
CO2 REDUCTION:
0W
0g
SUPER ENERGY SAVING
IS ACTIVE
RESET
Eachoptionisexplainedbelow.
SUPERENERGYSAVING Description
ON
EnablesSUPERENERGYSAVINGyoucansaveenergywiththisenergy-efficientfunction
OFF DisablesSUPERENERGYSAVING.
RESET ResetsthevaluesoftotalenergyconsumptionreductionandCO2emissionreduction
estimates.
 TOTALPOWERREDUCTION:Howmuchpowerissavedwhileusingthemonitor.
 TOTALCO2REDUCTION:ChangetheTOTALPOWERREDUCTIONtoCO2.
 SAVINGDATA(W/h)
 
SavingDatadependsonthePanel.So,thosevaluesshouldbedifferentfromeachpanelandpanel
vendor.
 
LGcalculatedthesevaluesbyusing“broadcastvideosignal”
(includingbroadcastvideo:IEC62087)
 
SUPERSAVINGreferstohowmuchpowercanbesavedusingtheSUPERENERGYSAVING
function.
NOTE
546 mm 584 mm
(21.5 inch) (23 inch)
6 W/h 7 W/h
SUPER SAVING
19

CUSTOMIZING SETTINGS
Each option is explained below.
Description
DUAL DISPLAY
OFF If select OFF, DUAL DISPLAY off.
EXTENDED
primary monitor.
By selecting EXTENDED, user can use secondary monitor as extended mode of
CLONE
monitor.
By selecting CLONE, user can use secondary monitor as clone mode of primary
1 Press FUNC.buttonon
thebottomoftheMonitorsettodisplaythe
FUNC.OSD.
2 Select bypressingthe►button.
3 Enterto bypressingthe▼button.
4 Settheoptionsbypressingthe◄or►or▼
buttons.
5 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
DUAL DISPLAY
DUAL DISPLAY
DUAL DISPLAY
EXIT
FUNC. >DUAL DISPLAY
OFF
EXTENDED
CLONE
Eachoptionisexplainedbelow.
1 Press FUNC.buttonon
thebottomoftheMonitorsettodisplaythe
FUNC.OSD.
2 Select bypressingthe►button.
bypressingthe▼button.
3 Enterto
4 Settheoptionsbypressingthe◄or►or▼
buttons.
5 SelectEXITtoleavetheOSDmenu.
Toreturntotheuppermenuorsetothermenuitems,
usetheuparrow( )button.
DUAL WEB
DUAL WEB
DUAL WEB
Description
DUAL WEB
OFF If select OFF,DUAL WEB is off.
ON
move windowson screen. Help user to control dividedwindows ratio.
Help user to browse web efficiently by dividing in half. Help to arrange and
* Before using below functions, please install DUAL PACKAGE program.
EXIT
FUNC. >DUAL WEB
ON OFF
* Before using below functions, please install DUAL PACKAGE program.
NOTE
yWhen monitor goes to power saving mode with pc saving option
-> Pressing any button -> OSD appear and user should press dual button -> User can bring back to
normal mode.
20
ENG
ENGLISH