LG M1962D User manual

Make sure to read the Safety Precautions before
using the product.
Keep the User's Guide(CD) in an accessib e p ace for
furture reference.
See the abe attached on the product and give the
information to your dea er when you ask for service.
OWNER’S MANUAL
MM11996622DD//MM22006622DD
MM22226622DD//MM22336622DD
MM22776622DD
Trade Mark of the DVB Digita Video
Broadcasting Project (1991 to 1996)
IIDD NNuummbbeerr((ss))::6819 : M1962D
6820 : M2062D
6821 : M2262D
6822 : M2362D
6823 : M2762D

1
PREPARATION
FRONT PANEL CONTROLS
■
This is a simp ified representation of the front pane . The image shown may be somewhat different from your set.
INPUT
Button
INPUT
MENU
PR
VOL
OK
MENU
Button
OK
Button
VOLUME
Buttons
PROGRAMME
Buttons
Power
Button
Headphone
Jack
IR receiver
(Remote contro er
receiver)
LLiigghhtt SSeennssoorr
This is ens for ight sensor
se ect outside uminance,
when setting AUTO
BRIGHT ON.
PPoowweerr IInnddiiccaattoorr
i uminates b ue when the
set is switched on.
Note:You can adjust Power
indicator in the OPTION
menu.

22
PREPARATION
BACK PANEL INFORMATION
PPCCMMCCIIAA ((PPeerrssoonnaa CCoommppuutteerr MMeemmoorryy CCaarrdd
IInntteerrnnaattiioonnaa AAssssoocciiaattiioonn)) CCaarrdd SSoott
This feature is not avai ab e in a countries.
PPoowweerr CCoorrdd SSoocckkeett
This set operates on AC power. The vo tage is indicated
on the Specifications page. Never attempt to operate the
set on DC power.
HHDDMMII IInnppuutt ((NNoott SSuuppppoorrtt PPCC))
Connect a HDMI signa to HDMI IN.
Or DVI (VIDEO) signa to HDMI IN with DVI to HDMI
cab e.
RRGGBB//DDVVII AAuuddiioo IInnppuutt
Connect the audio from a PC.
OOppttiiccaa DDiiggiittaa AAuuddiioo OOuutt
Connect digita audio from various types of eguipment
RRGGBB IINNPPUUTT ((PPCC))
Connect the output from a PC.
UUSSBB IINN
DDVVII--DD IInnppuutt
Connect the output from a PC.
RRSS--223322CC IINN ((CCOONNTTRROOLL && SSEERRVVIICCEE)) PPOORRTT
Connect to the RS-232C port on a PC.
CCoommppoonneenntt IInnppuutt
Connect a component video/audio device to these
jacks.
AAuuddiioo//VViiddeeoo IInnppuutt
Connect audio/video output from an externa device to
these jacks.
EEuurroo SSccaarrtt SSoocckkeett ((AAVV11//AAVV22))
Connect scart socket input or output from an externa
device to these jacks.
AAnntteennnnaa IInnppuutt
Connect over-the-air signa s to this jack.
1
2
3
4
5
6
7
8
9
10
11
12
13
■
This is a simp ified representation of the back pane . The image shown may be somewhat different from your set.
AV 1 AV 2
AC IN
AUDIO IN
(RGB/DVI) OPTICAL
DIGITAL
AUDIO OUT
VIDEO
COMPONENT
IN
AV IN 3
VIDEO -AUDIO-
(MONO)
AUDIO
Y
P B
P R
L
R
RS-232C IN
(CONTROL & SERVICE)
USB IN
RGB IN (PC)
DVI-D IN (PC)
HDMI IN 1
AV 1
V 1
AV 2
V 2
AC IN
ANTENNA/
CABLE IN
LR
3
910 11
2
1
3
87 1312
64 5

33
PREPARATION
STAND INSTALLATION
■
The image shown may be somewhat different from your set.
12
3
Carefu y p ace the product screen side down on a
cushioned surface that wi protect product and
screen from damage.
Insert the ssttaanndd bbaasseeinto the product
<<MM11996622DD//MM22006622DD//MM22226622DD//MM22336622DD>>
Turn the Stand Base Lock through 90°to fix the Stand Base to the Stand Body.
BBaassee LLoocckk
<<LLoocckkeedd>>
4 5
O
P
E
N
O
P
E
N
O
P
E
N
O
P
E
N

44
PREPARATION
<<MM22776622DD>>
STAND INSTALLATION
■
The image shown may be somewhat different from your set.
12
3
Carefu y p ace the product screen side down on a
cushioned surface that wi protect product and
screen from damage.
Insert the ssttaanndd bbaasseeinto the product
Attach the monitor to the Stand Base by turning the screw to the right.
*Turn the screw by using the screw hand e
4

55
PREPARATION
DETACHING STAND
12
3
4
P ace the set screen side down on a cushion or
soft c oth.
Detach the monitor to the Stand Base by turning
the screw to the eft.
Turn the Stand Base Lock through 90°to separate the Stand Base from the Stand Body.
Pushing Latch inside, Take the stand base from stand body.
O
P
E
N
O
P
E
N
O
P
E
N
O
P
E
N
O
P
E
N
O
P
E
N
■
The image shown may be somewhat different from your set.
LLaattcchh
<<MM11996622DD//MM22006622DD//MM22226622DD//MM22336622DD>>

66
PREPARATION
<<MM22776622DD>>
DETACHING STAND
12
3
5
P ace the set screen side down on a cushion or
soft c oth.
Detach the monitor to the Stand Base by turn-
ing the screw to the eft.
Turn the screw by using the screw hand e. 4Pu the stand base.
■
The image shown may be somewhat different from your set.

77
PREPARATION
<<MM22776622DD>>
DETACHING STAND BODY
1. Remove the screw 4 point.
2. Pu the stand body.
1. Remove the screw 2 point.
2. Pu the stand body.
■
The image shown may be somewhat different from your set.
■
Remove the Stand Body in the same way as the fo owing when using it as a Wa Hook.
<<MM11996622DD//MM22006622DD//MM22226622DD//MM22336622DD>>

88
PREPARATION
DESKTOP PEDESTAL INSTALLATION
For proper venti ation, a ow a c earance of 4 inches on each side and from the wa .
4 inches
4 inches
4 inches
4 inches
WALL MOUNT: HORIZONTAL INSTALLATION
For proper venti ation, a ow a c earance of 4 inches on each side and from the wa . Detai ed insta ation instruc-
tions are avai ab e from your dea er, see the optiona Ti t Wa Mounting Bracket Insta ation and Setup Guide.
4 inches
4 inches
4 inches 4 inches
4 inches

99
PREPARATION
POSITIONING YOUR DISPLAY
■
The image shown may be somewhat different from your set.
Adjust the position of the pane in various ways for maximum comfort.
•• TTiitt rraannggee
LOCATION
Position your set so that no bright ight or sun ight fa s direct y onto the screen. Care shou d be taken not to expose
the set to any unnecessary vibration, moisture, dust or heat. A so, ensure that the set is p aced in a position to a ow a
free f ow of air. Do not cover the venti ation openings on the back cover.
If you intend to mount the set to a wa , attach Wa mounting interface (optiona parts) to the back of the set.
When you insta the set using the wa mounting interface (optiona parts), attach it carefu y so it wi not drop.
- Be sure to use screws and a wa mount that meet VESA standards.
- Using screws onger than those recommended might damage the product.
- Using screws that do not meet VESA standards might either damage the product or resu t in it coming away from the
wa . We wi not be he d responsib e for any damage resu ting from fai ure to fo ow these instructions.
< Screw Mounting Interface Dimension >
MM11996622DD//MM22006622DD//MM22226622DD//MM22336622DD: 100mm x 100mm ho e spacing
MM22776622DD : 200mm x 100mm ho e spacing
-5
°
15 °
WWaarrnniinngg::
When adjusting the ang e of the screen,do not put your finger(s)in
between the head of the monitor and the standbody.You can hurt
your finger(s).

PREPARATION
SECURING THE SET TO THE WALL TO PREVENT FALLING
WHEN THE SET IS USED ON A STAND
We recommend that you set up the set c ose to a wa so it cannot fa over if pushed backwards.
Additiona y, we recommend that the set be attached to a wa so it cannot be pu ed in a forward direction,
potentia y causing injury or damaging the product.
Caution: P ease make sure that chi dren don’t c imb on or hang from the set.
■
Image shown may differ from your set.
■
Insert the eye-bo ts (or set brackets and bo ts) to tighten the product to the wa as shown in the picture.
* If your product has the bo ts in the eye-bo ts position before inserting the eye-bo ts, oosen the bo ts.
* Insert the eye-bo ts or set brackets/bo ts and tighten them secure y in the upper ho es.
Secure the wa brackets with the bo ts (so d separate y) to the wa . Match the height of the bracket that is
mounted on the wa to the ho es in the product.
Ensure the eye-bo ts or brackets are tightened secure y.
1100
■
Use a sturdy rope or cord (so d separate y) to tie the product. It is
safer to tie the rope so it becomes horizonta between the wa and the
product.
NOTE
!
GWhen moving the set, undo the cords first.
GUse a p atform or cabinet strong enough and arge enough to support the size and weight of the set.
GTo use the set safe y make sure that the height of the bracket on the wa and the one on the set are the
same.

1111
ATTACHING THE TV TO A DESK (On y M2762D)
The TV must be attached to desk so it cannot be pu ed in a forward/backward direction,potentia y causing
injury or damaging the product.Use on y an attached screw.
■
Image shown may differ from your set.
WARNING
!
GTo prevent TV from fa ing over,the TV shou d be secure y attached to the f oor/wa per insta ation
instructions. Tipping,shaking, or rocking the machine may cause injury.
1-Screw
(provided as parts of the product)
PREPARATION
Stand
Desk

1122
PREPARATION
KENSINGTON SECURITY SYSTEM
- The product is equipped with a Kensington Security System connector on the back pane . Connect the
Kensington Security System cab e as shown be ow.
- For detai ed insta ation and use of the Kensington Security System, refer to the user’s guide provided with the
Kensington Security System.
For further information, contact hhttttpp::////wwwwww..kkeennssiinnggttoonn..ccoomm, the internet homepage of the Kensington
company. Kensington se s security systems for expensive e ectronic equipment such as notebook PCs and LCD
projectors.
NOTE
- The Kensington Security System is an optiona accessory.
NOTES
a. If the product fee s co d to the touch, there may be a sma “f icker” when it is turned on.
This is norma , there is nothing wrong with product.
b. Some minute dot defects may be visib e on the screen, appearing as tiny red, green, or b ue spots. However, they
have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or ho ding your finger(s) against it for ong periods of time.
Doing so may produce some temporary distortion effects on the screen.

1133
AV 1 AV 2
ANTENNA/
CABLE IN
AV 1 AV 2
ANTENNA/
CABLE IN
EXTERNAL EQUIPMENT SETUP
■For optimum picture qua ity, adjust antenna direction.
■An antenna cab e and converter are not supp ied.
■To prevent equipment damage, never p ug in any power cords unti you have finished connecting a equipment.
Mu ti-fami y Dwe ings/Apartments
(Connect to wa antenna socket)
Sing e-fami y Dwe ings /Houses
(Connect to wa jack for outdoor antenna)
Outdoor
Antenna
(VHF, UHF)
Wa
Antenna
Socket
RF Coaxia Wire (75 ohm)
ANTENNA CONNECTION
Antenna
UHF
Signa
Amp ifier
VHF
■In poor signa areas, to get better picture qua ity, insta a signa amp ifier to the antenna as shown above.
■If signa needs to be sp it for two TVs, use an antenna signa sp itter for connection.

1144
EXTERNAL EQUIPMENT SETUP
Connect the SET-TOP outputs to the CCOOMMPPOONNEENNTT IINN
VVIIDDEEOOsockets (Y PBPR) on the set.
Connect the audio cab e from the SET-TOP to CCOOMMPPOO--
NNEENNTT IINNAAUUDDIIOOsockets of the set.
Press the IINNPPUUTTbutton to se ect CCoommppoonneenntt..
2
3
1
HD RECEIVER SETUP
■To prevent the equipment damage, never p ug in any power cords unti you have finished connecting a equipment.
■
The image shown may be somewhat different from your set.
When connecting with a component cab e
Signa
480i/576i
480p/576p
720p/1080i
1080 p
Component
Yes
Yes
Yes
Yes
HDMI
No
Yes
Yes
Yes
VIDEO
COMPONENT
IN
AUDIO
Y
P B
P R
L
R
1
2

1155
EXTERNAL EQUIPMENT SETUP
When connecting with a HDMI
Connect the HDMI output of the digita set-top box to the
HHDDMMII IINNjack on the set. or
1
Connect the digita set-top box to HHDDMMII IINN jack on
the set.
Connect the audio output of the digita set-top box to
the AAUUDDIIOO IINN ((RRGGBB//DDVVII)) jack on the set.
Turn on the digita set-top box. (Refer to the owner’s
manua for the digita set-top box.)
2
3
1
When connecting with a HDMI to DVI cab e
HDMI IN 1
1
HDMI IN 2
HDMI IN 2
DVI OUTPUT
AUDIO
R
L
AUDIO IN
(RGB/DVI)
HDMI IN 1
12
or
NOTE
!
G HDMI Input does not support PC mode. If it is connected PC, the screen may not be disp ayed proper y.

1166
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting with a component cab e
Component Input ports
To get better picture qua ity, connect a DVD p ayer to the component input ports as shown be ow.
Component ports on the set
YP
BPR
Video output ports
on DVD p ayer
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Connect the video output sockets (Y PBPR) of the DVD to
the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO sockets (Y PBPR) of the set.
Connect the audio cab e from the DVD to CCOOMMPPOONNEENNTT
IINN AAUUDDIIOO sockets of the set.
Press the IINNPPUUTTbutton to se ect CCoommppoonneenntt.
Press the PPLLAAYYbutton on the DVD.
The DVD p ayback picture appears on the screen.
2
3
4
1
VIDEO
COMPONENT
IN
AUDIO
Y
P B
P R
L
R
1
2

1177
EXTERNAL EQUIPMENT SETUP
When connecting with a Euro Scart[DVD]
Connect the Euro scart socket of the DVD to the Euro scart
socket of the set.
Press the IINNPPUUTTbutton to se ect AAVV11.
If connected to AAVV22 Euro scart socket, se ect AAVV22 input
source.
Press the PPLLAAYYbutton on the DVD.
The DVD p ayback picture appears on the screen.
2
3
1
When connecting HDMI cab e
Connect the HDMI output of the DVD to the
HHDDMMII IINN jack on the set. or
1
GSet can receive the video and audio signa simu taneous y by using a HDMI cab e.
G If the DVD p ayer does not support Auto HDMI, you need to set the DVD output reso ution appropriate y.
NOTE
!
NOTE
!
GSigna type RGB, i.e. the signa s red, green and b ue can on y be se ected for the Euro scart and the AV 1 can be
received. These signa s are transmitted, for examp e, by a paid TV decoder, game machine or photo CD unit, etc.
GP ease use shie ded scart cab e.
AUDIO
(L)
(R)
AUDIO/
VIDEO
AV 1 AV 2
1
HDMI IN 1
1
HDMI IN 2

1188
EXTERNAL EQUIPMENT SETUP
VCR SETUP
■To avoid picture noise (interference), eave an adequate distance between the VCR and set.
■Typica y a sti picture is shown on the VCR. If a user uses 4:3 picture format for a ong time, an afterimage may
remain on the sides of the screen.
OUTPUT
SWITCH
ANT IN
R
S-VIDEO VIDEO
ANT OUT L
AV 1 AV 2
ANTENNA/
CABLE IN
Wa Jack
Antenna
1
2
When connecting with an antenna
Connect the RF out socket of the VCR to the aeria socket of the set.
Connect the aeria cab e to the RF aeria in socket of the VCR.
Store the VCR channe on a desired programme number using the ‘Manua pro-
gramme tuning’ section.
Se ect the programme number where the VCR channe is stored.
Press the PPLLAAYY button on the VCR.
1
2
3
4
5